Select All And Move From Listbox1 To Listbox2
Nov 5, 2008
How do I change the following code to allow me move all contents from listbox1 to listbox2?
Windows Vista - Excel 2003
Option Explicit
Private Sub cmdLeft_Click()
With Me.lbRight
‘Make sure something is selected
If .ListIndex > -1 Then
‘Add the selection to the other listbox
Me.lbLeft.AddItem .Value
‘Remove the item from the current listbox
.RemoveItem .ListIndex
End If
End With
End Sub
View 9 Replies
ADVERTISEMENT
Feb 16, 2013
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
View 8 Replies
View Related
Mar 8, 2014
I have a userform which catch data from worksheet and show it in userform listboxes.
I have two worksheets named " EmployeeRecord" and "SalesRecord"
I have two ListBoxes in userform.
In the userform I have a search text box which is used to search employee and show employee list in ListBox1. This is working perfectly.
The problem is with Listbox2 which I want it to search data from worksheet " SalesRecord" for selected employee in ListBox1 and show data in ListBox2.
how I can bring data in listbox2, when employee is selected in listbox1.
I have attached worksheet and userform.
View 1 Replies
View Related
Sep 29, 2011
I have listbox1 MultiSelectExtended (2 columns). If the items are selected I add them to listbox2 (also in 2 columns) with a CommandButton. The problem is that the code I have in the CommandButton adds them upside down!
I want to transfer from listbox1 to listbox 2 in the same order as listbox1 (Top to Bottom)
This is the code:
With ListBox1
For eCount = .ListCount - 1 To 0 Step -1
If .Selected(eCount) = True Then ' if selected then
ListBox2.AddItem .List(eCount, 0) 'add to listbox2, Column 0
ListBox2.Column(1, ListBox2.ListCount - 1) = .List(eCount, 1) 'add to listbox2, Column 1
End If
Next
End With
View 4 Replies
View Related
Jun 6, 2006
I have multiple choices in a list box. I wish to know how do i link each choices in the list box to another worksheet so when clicked it goes to the worksheet specified.
View 3 Replies
View Related
Jun 5, 2014
I click on one label, and all labels get selected. This is good. But then when I try to grab them to move all of them, they become deselected except for the one the mouse was over. I want to move them all at once.
View 2 Replies
View Related
Jan 19, 2009
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies
View Related
Jul 7, 2009
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies
View Related
Oct 30, 2012
I have a multiselect listbox with values that gets populated from a sql statement, and I would like to get is the first or second index from the selected item. I know how to get the listindex from a combobox by using:
VB:
cbnumber.List(.ListIndex, 0)
How can I loop through and get the 1st index number for the selected items only from the listbox? I want to pass this index number to another sql statement.
View 5 Replies
View Related
Jul 7, 2008
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies
View Related
Oct 4, 2007
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
View 9 Replies
View Related
Nov 16, 2006
I need to get a macro to select all the data in column "A", sort it in ascending order, omit the blanks if any, then select (highlight) all the data so that another macro can be run.
When I record it, it will only record up to the last row I highlight but the data always changes so there could be more or less.
View 9 Replies
View Related
Aug 13, 2007
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
View 9 Replies
View Related
Oct 28, 2008
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies
View Related
Jul 23, 2008
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
View 9 Replies
View Related
Apr 21, 2008
How would one go about making a module that would tell Sheet1 that if any number in column B is greater than 1 then take the contents of the row that number is in and copy it to Sheet2? Attached is an example of the workbook.
View 10 Replies
View Related
May 31, 2007
I have 8 rows (B345:B352) that have a formula similar to this:=IF(Site1!B53>0,CONCATENATE(Site1!$B$53," Scansys 942 @ ","$",Site1!D53,".00"),""). By the way, can the formula be shortened? I tried formatting the merged cell but nothing changes.
When Site1!B53=0, then there's nothing in the cell.That's how I want it. But say, row 3, Site3!$B$53 >0 how do I programatically move (copy/paste?) row 3 to row 1 (since row 1 and row 2 are blank)? In other words, Since rows 1 & 2 is blank, I don't want the two empty rows there, so I would like to move row 3 up to row1.
View 9 Replies
View Related
Mar 10, 2009
I have a workbook with several sheets each containing different numbers of rows. These rows contain data from clients (codes etc applying to motors). The rows have been randomly populated and I am having to move rows from somewhere in the sheet up or down so the codes are grouped according to which motor they apply to.
What I want to do is select a row and be able to run a macro that will move it where I want. The destination can be up or down and any number of rows away. Does anyone have any ideas how to do this? I was thinking that if I selected the row I wanted to move and the one I wanted to move it to then run the macro it could be moved. Its not to replace the destination row, but be inserted alongside it.
View 9 Replies
View Related
Mar 18, 2014
For a specific equation to work I need to know the distance whenever the acceleration is maximum.
The last part is a piece of cake, using MAX I get the desired results.
However, returning the distance is difficult.
What I'd like to do is return the value of the cell to the right of the maximum acceleration.
Using
=ADDRESS(MATCH(MAX(K2:K754);K2:K754;0);COLUMN(K2:K754))
I got the address of MAX, but that's about as far as I get.
View 9 Replies
View Related
Nov 30, 2008
I have got a problem with moving to another cell. For example, I click A1, the active cell is A1, then I wanna move to B1. I usually just need to use the right arrow on my keyboard to move. But this time, it didn't move - instead, it moves the scroll bar.
View 2 Replies
View Related
Jun 27, 2009
I've got a selected area and a button I've got to click on. I can't see them both on the screen at the same time.
If I try to move from the selected area to the button the selected area becomes unselected!
How do I keep it selected?
That's the problem and the question. If you'd like to know the background it is this:
I need to put a spreadsheet into a web page and I downloaded a macro that will generate slim html code for you, for any spreadsheet.
This is it. When I ran it I discovered it opened in its own spreadsheet with this button to get it started once you've pasted into it the spreadsheet or part of a spreadsheet that you want converted.
Makes it nice and easy. Easier than bothering to import a macro into your own spreadsheet.
View 10 Replies
View Related
Jan 22, 2013
I tried to move a tab to a new Excel workbook. You may say that it is very straightfward to do it: right click the tab and then do 'move' or 'create a copy'.
I found the problem is that the whole color will be completely changed and look bizarre. I really like to get a genuine copy of the tab: all remains the same.
View 5 Replies
View Related
May 30, 2014
I am trying to move some parts of a row (From G:AE) where text is found in G Column. It moves it back 1 column from G
[Code] .....
Attached File : ozeform.csv‎
View 4 Replies
View Related
Feb 15, 2014
In column F if a cell contains the word Test I want it to copy the cell where it is found and paste the value of it exactly 4 cells to the left.
View 1 Replies
View Related
Mar 7, 2014
I could get a code to move a row from one area of a worksheet to another area on the same worksheet once a cell is tagged "Paid" via a refreshed macro. The updating data table starts on Row 3 for columns "B" - "R." The paid table starts on row 56 where column "B" always has a date in its cell.
View 7 Replies
View Related
Dec 1, 2008
Can this code be modified to copy pictures rather than move them? I want to keep them in a tidy library column A:A. The workbook finds a picture based on the picklist, it is an example I found online but I need it to copy and paste the picture (and leave the original where it is).
F1 cell
=VLOOKUP(A2, PicTable, 2, FALSE) this is connected to a 2 column validation table called picTable that has names in the first column (values in the picklist) and picture names in the second column (which corrosponds to the actual picture names)
Also, long after they have been copied, I need to clear all of what I have copied (with a macro button), but when I record a macro to do this it doesnt work because the copied "picture number' changes each time it is copied and the recorded macro only deletes the picture object number that I deleted when recording it!
View 4 Replies
View Related
Dec 5, 2008
I am trying to move the data in a row from cell D thru I (eye) to cell H thru M.
Simply move it all over a few cells. Well not so simply.
The line in RED fails.
View 7 Replies
View Related
Dec 16, 2008
I require code which will transfer text+numerical data from column K to column I (same row) and numerical data in Column I to one row above. I enclose an attachment by way of illustration. Actual s/s is 332324 rows deep - making manual changes impractical.
View 2 Replies
View Related
Nov 10, 2009
I am trying to move one column to the right each time the macro is ran. Next time it should go from columns B:B to C:C
View 12 Replies
View Related
Jun 14, 2012
I need to cut and move data in a worksheet where the bottom always changes. The header row should stay in worksheet 1 and row 2 down to the bottom needs to be cut and moved to worksheet 2. One time it could be 100 rows and the next time a thousand or more.
View 5 Replies
View Related
