I have multiple choices in a list box. I wish to know how do i link each choices in the list box to another worksheet so when clicked it goes to the worksheet specified.
View 3 Replies
I'm trying to find a way to make the user select only one of five columns in a row. What I’m trying to get is a ranking of 1 to 5. The user will click a cell and it will fill in or the user puts an X in it. In row 8 I want to select A through E but only one of them. If the user changes their mind and clicks another cell, the first cell clears.
View 9 Replies View RelatedI need to do is move a list of data in an excel worksheet to Notepad. The data is 16 numbers long, but the Notepad needs to be left justified to 19 characters. I can't figure out a way to move spaces over to notepad.
View 6 Replies View RelatedI'm very new to the VB experience and am having trouble getting the choices in my list boxes to show up.
View 6 Replies View RelatedI created a dropdown menu, that asks you make a choice from a list.
"Under 5"
"Between 5 and 10"
"Over 10"
However I want to connect the choice to a certain number and use it for a formula. For example:
"Under 5" is equal to 1
"Between 5 and 10" is equal to 2
"Over 10" is equal to 3
So if I make a formula to multiply the cell that says Under 5, excel to understand it is actually the digit 1.
Column D has a list with the choices OPEN, PENDING, CLOSED. I want Column E to automatically enter the date when someone choose closed in Column D.
So in Cell E6. I wrote, IF(D6="Closed",Today(),"") . . . . .
It works, but wondering if E6 will keep changing the day every day to show the current day (bad) If so, how do it get it keep the closed date?
I want to select a Hyperlinked file.These files are named using Data in ColumnA,B & C. The realtionship between filename and data in columns is; A-B-C.ext. After selecting data A from the dropdown list,i should be able to select corresponding data B and then again another dropdown list for corresponding data C.This should show the desired already hyperlinked file. I want to select the hyperlinked file name by simply selecting all the three data independently.
View 3 Replies View RelatedI have a Data Validation list in cell A1 of a worksheet called LIST. I would like to modify the macro that I have recorded, the macro uses data from various worksheets. I would like to sort out some code so that at certain points in the macro it will select the worksheet that is shown in cell A1 of the LIST sheet and then carry out the code already recorded. THis will allow me to quickly change a sheet name that is refererred to in the macro numerous times without actually manually editing the sheet name in the macro code.
View 7 Replies View RelatedI have a data table that contains begin dates, end dates, and colors. The data is input starting with the earliest begin date. On a second worksheet, I have a listing of the years starting with the year of the first begin date and ending with the end of this year. I need to be able to pull any color choices associated with a year from the data table on the first worksheet. Some years may not be specifically listed in the data sheet as the person could have had the same color choice for several years. Sometimes a person could have more than one color choice in a year.
I am at a loss for how to get to the data I need. I created an example spreadsheet to demonstrate the data I am working with, and an example of what I need my results to look like in the end.
I am trying to create a simple user interface type thing so that someone is able to select from drop down lists someones information, such as whether they are male or female, aged between 19-35 or 35-67, whether they are studying in a business area, legal or construction etc (there are 6 variables in total), This will then give the probability of success of the person passing this course based on probabilities which I have already worked out. I have worked out how to do the first stage of creating a drop down list showing alternative choices with Sex, Age etc in the data validation options, however:
There are 517 possible combinations, as in Male aged 19 to 35 studying Business (with other variables) or Male aged 19 to 35 studying Law (+ other variables) etc etc etc each with their own probability of success. Due to the long nature of writing out Male1935BusinessNorthWestWhiteBritishCollegeBrown I have rewritten it so it appears in the excel file as M1935BNWWBCB, which obviously wouldn't make any sense to someone if they had to select M 1935 B NW WB CB from drop down lists.
Along side the M1935BNWWBCB there is the probability of success specific to that type of person. So for example I could would have:
M 60%
M1935 64%
M1935B 35%....
How do I change the following code to allow me move all contents from listbox1 to listbox2?
Windows Vista - Excel 2003
Option Explicit
Private Sub cmdLeft_Click()
With Me.lbRight
‘Make sure something is selected
If .ListIndex > -1 Then
‘Add the selection to the other listbox
Me.lbLeft.AddItem .Value
‘Remove the item from the current listbox
.RemoveItem .ListIndex
End If
End With
End Sub
I click on one label, and all labels get selected. This is good. But then when I try to grab them to move all of them, they become deselected except for the one the mouse was over. I want to move them all at once.
View 2 Replies View RelatedI have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies View RelatedMove a row of work to resolved tab once column M is changed to resolved This needs to be moved to the first available line on the resolve tab The row that has just been moved from the orginating agents tab needs to be deleted and shifted up When moved to the resolved tab I want it to prepopulate where the row originated from in column N When moved to resolved tab I want it to prepopulate the date it was resolved Also the spreadsheet will be shared
I have attached a test version of the spreadsheet.
I have whats going to be a very large "Input" worksheet that has several headings of columns. One of these columns is "category" as in parts of a vehicle, i.e. steering, wheels, rod-ends and so on. Now what I would like to do, is once I type a new row of information in, to have the filter go through and copy said category row into another worksheet where I can have all of them separated on there own.
Here is a picture of my current spreadsheet. So basically I want to be able once I save the file, that it goes through and where it detects Rear-End in "B18" I would like it to select row 18, copy all of its cells and move them into the worksheet Rear-End
I created a outstanding task worksheet in excel and I would like to move the completed jobs from this sheet to the second worksheet titled 'Completed Tasks'. The first worksheet is called 'Outstanding Tasks'.
I came up with a code to do this (see below). As you can see when I type "Y" into column G it moves the row into the second worksheet. It does this; however it puts it to the bottom of the table on the second worksheet where I would like it to be at the top. I also would like it to delete the row once it has moved it does this but then deletes the other row of information above it leaving blank rows on either side.
I simply want a code that moves the row of information to the second worksheet when I type Y into column G and then delete the row without messing with other information around it.
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim rng As Range
Set rng = Target.Parent.Range("G5:G1000")
If Target.Count > 1 Then Exit Sub
If Intersect(Target, rng) Is Nothing Then Exit Sub
Select Case Target.Text
Case "Y"
Target.EntireRow.Cut Sheets("Completed Tasks").Cells(Rows.Count, "A").End(xlUp).Offset(1)
Selection.ListObject.ListRows(1).Delete
End Select
End Sub
I have a workbook with two worksheets in it. The first "TO DO" and the second "Completed". In "TO DO", I have rows of tasks starting in row 4 (row 3 is my header), going to 200. What I'd like to have happen is when I put a "C" in column C, it moves the entire row to the "Completed" worksheet, greys it out and removes it from the "TO DO" worksheet. Then if I remove the "C" from the "Completed" worksheet, it moves it back to the bottom of the list. I already have a macro to resort it based on "priority" in column E.
View 9 Replies View Relatedi need to get certain info from one worksheet to another is there any way to do this automatically
View 9 Replies View Relatedi have this at the moment:
in a sheet named CURRENT is all our data.
when the jobs done the Satus Column "F" is changed to INVOICE
and then once a day or whenever they are all moved to a new sheet named the month and year, in this case JUN 09 this works fine as it is but at the moment i have to delete the lines myself from where it took the data from in CURRENT or AtoZ then remove them in 1 go.
Simply put, i want the code to remove these lines itself....
I have a set of worksheets that need to be moved to their own individual master sheets. i.e. FW32Lightning.csv needs to be moved to Lightning.xls which has all of the fiscal weeks in it as seperate. I know the generic way of doing this, but I need to know how do I write the macro that when I run it every week I don't have to go in and change the fiscal week.
View 5 Replies View RelatedI've included bits of my code and some debug output. Whenever I attempt to add a worksheet, either BEFORE or AFTER I get the following ERROR MESSAGE: Method 'Add' of object 'Sheets' Failed. if I use the .add without before and after a worksheet is added. The problem is that it is always added before the active sheet. I need to replace a single sheet in the correct position of possible 10 sheets. I know the names of the sheets and which one I want to replace, but I can't get EXCEL to move sheets, add sheets by position Number or name, without getting the ERROR.
Public xlApp As Excel.Application
Public xlBook As Excel.Workbook
Public xlSheet As Excel.Worksheet
Public xlRange As Excel.Range
.....
Set xlApp = CreateObject("Excel.Application")
Set xlBook = xlApp.Workbooks.Add
....
xlBook.Worksheets.Add After:="Accounts Receivable" *****
?xlsheet.Name
Accounts Receivable
?xlbook.Worksheets.Count
4
?xlbook.Worksheets(4).name
Accounts Receivable
How can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedWith the above code, is it possible to trasfer all selected charts, on to a new spreadsheet and print them to fit on one page Landscape, no margins?? Or is that stretching it, i tried it but i print them all A4
View 2 Replies View RelatedI have a workbook with multiple sheets. I need to create a macro and associate it with a command button that will cut the row the user has selected and paste it into the last empty row on another sheet in the same workbook, then, go back to the first sheet and delete the empty row.
View 3 Replies View RelatedI have a sheet on the left is a list of document names, next to the list is a hyperlink to the actual document. On the right is a drop down list.
The list contains:
Started
In Progress
Complete
I want each person to be able to use the dropdown list to move to the next level but not be able to go backwards.
Example of how it would work:
A person would click the link to the document and set the status to Started in the drop down.They would read half the document and set the list to In progress. However they would not be able to go back to Started or a blank cell once they have set it to In Progress. The same applies to the next level, if they set it to Complete, they cannot change it to anything. Perhaps before "locking" it as Complete there could be a message box warning that the action is not reversible and giving the option to leave it as In Progress.
who can help me in moving to specified column using drop down list? I have attached a sample file. I would like to simply move to a speicifed column once I select from the drop down list I have.
View 12 Replies View RelatedIF formula to transfer specific text and values from sheet 1 to sheet 2 (please refer to attachment). Sheet 2 should display the name, state and unprocessed rate for each month for individuals with a rate of 95% and 30 or more unprocessed files.
Unprocessed Files.xlsx
I would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View RelatedI have some code that unhides the next worksheet when the value 'next' is selected at the bottom of the sheet being completed.
I would like to add some code so that the new sheet is opened and the curser is placed in the first cell that needs to be completed (E5).
