Select Base Worksheet Or Duplicate - Shows Runtime Error
May 2, 2014
I was given a workbook with several bugs and asked to fix it and make it functional again. I was able to fix everything except for a runtime error 1004. On the debug it highlights the following code:
Code:
Private Sub ComboBox1_Change()
End Sub
Private Sub Worksheet_Activate()
LoadSheetNames "Compare_Session_Start", "Engineer*"
End Sub
Private Sub LoadSheetNames(strRangeForValidation As String, strDesiredCodeName As String)
[code]....
Anytime you select the base worksheet or a duplicate it shows the runtime error...
I am trying to select a group of cells in an inactive worksheet from code in a module but I keep getting a run-time error 9 message and I cant seem to find the syntax problem.
I pasted my code below and the error occurs in the last line before the end sub statement.
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
I have a Petty Cash Workbook that consists of a Cash Receipts worksheet, and two separate credit card worksheets. I would like to be able to summarize the data from these three worksheets to a fourth worksheet called “Yearly Totals”. I’ve copied and modified code from Ron deBruin’s website but I’m not getting anywhere with it. I’m constantly running a Runtime ERROR 9 with this line:
Very new to VBA and having trouble with a simple macro running in 2003 that copies and pasts to another worksheet. Code as follows:
Private Sub CopyResults_Click() 'Select the filtered data and copy it Range("A23").Select Range(Selection, Selection.End(xlToRight)).Select Range(Selection, Selection.End(xlDown)).Select Selection.Copy Range("F19").Select ' Open the template and copy in the data Workbooks.Open Filename:="C:Athens Verification DataTemplatesVerification Template.xls" Workbooks("Verification Template.xls").Activate ActiveSheet.Range("A1").Select ActiveSheet.Paste ActiveSheet.Range("A1").Select Application.CutCopyMode = False End Sub
When I run CopyResults, the sheet is opened and the data copied correctly, but I get a runtime error 1004 past method of worksheet class failed, with the line 'ActiveSheet.Paste' highlighted. Don't get this when I run the same macro in 2000.
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
I attached my workbook so you guys can easily take a look.
In this workbook I have 2 hidden worksheets.
To start off, you click the Add Week button, put in a date (mm-dd-yy), that brings up the sheet thats named with the date you just put in the text box. (Which happens to be placed in the wrong spot) In that sheet that appears theres a button to "Delete last" which is suposed to delete the last sheet in the worksheet but the new sheet gets placed between the existing charts. Thats my first problem.
Next, when you hit the delete button, my VBA code is set to make one of the hidden sheets visible so it can delete one of the rows.
I'm getting the error for the following piece of code.
Sub itconfandscratch() Dim Cn As ADODB.Connection Dim Server_Name As String Dim Database_Name As String Dim User_ID As String Dim Password As String Dim SQLStr As String Dim rs As ADODB.Recordset Set rs = New ADODB.Recordset Server_Name = "sturecord" Database_Name = "Scratch" ' Enter your database name here SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here Set Cn = New ADODB.Connection Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
I have a workbook which contains multiple worksheets of employees' information. I'm hoping to share this workbook out. Each employee only able to view and update their own worksheet and their manager, being able to view/update everything within the workbook.
If Range("a7").Value = "" Then Range("A1:A6").Copy Destination:=Sheets("sheet1").Range("A" & Rows.Count).End(xlUp).Offset(1).PasteSpecial xlPasteAll, Transpose:=True 'Range("C1").PasteSpecial xlPasteAll, Transpose:=True End If
I'm working on a function that gets its values from a Data Validation List.
My problem is that I want the function to return a value when an item in the list is selected and another if the user did not make a selection... just a basic if....then....else ... but the cell where I call this function shows the #VALUE! error while no item in the list is selected.
I call the function like this: =myFunction(RC[-5], RC[-2]) where RC[-5] is the Data Validation List and RC[-2] is a cell where the user should enter a number
why I'm getting the #VALUE! error instead of my message
I am linking two worksheets together. Formulas work fine except when I close the source sheet, it turnes into #REF error. I saw in one of the posts that you can not use INDIRECT formula on closed workbooks (INDIRECT is a part of the formula in my sheet) and downloaded the changingExternal. zip file as directed. Although, after staring at it for a while, I realized that I had no idea as to what was going on in there.
The code thats generating the error is the following:
For Y = 8 To 131 TmpDate = Empty Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y) TmpDate = Range("A1").Value
For Langd = 1 To Len(TmpDate) TmpChar = Mid(TmpDate, Langd, 1) If Not TmpChar = " " Then TmpComp = TmpComp + TmpChar End If Next Langd
TmpDate = TmpComp TmpComp = Empty
If Len(Dag) = 1 Then Dag = "0" + CStr(Dag) End If
Macro continues before the Next-statement...
(it might not be good programming, but I think it should work). A little explanation to the code. I have a spreadsheet located on the intranet that has values I need in my spreadsheet. These figures are sorted by date, so I search for the date to find the right figures. The line Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y) works prefectly. I can see the value in my spreadsheet in the cell A1. its the next line that causes the error "Type mismatch". The value I get from the intranet spreadsheet looks similar to this: "1 Jul 2006 " (note all the spaces). What I do is just run it through a loop and cut of all spaces so it will look like this: "1Jul2006" to be sure I dont miss a space or anything.
Now to the funny part. The error only happens at runtime on the first go. If I chose to END the macro then and there, and then run it again from the top it works perfectly. If I set a stopsign to debug the code, it works perfectly on the first go too. Can anyone explain to me why that happens??
I know enough about programming to handle my syntax errors and so on, but I cant see anything wrong in this one...
Please note that this isnt the the entire code. I'm building a report on 12 diffrent spreadsheet. The main macro is almost 2000 rows of code, and it call other Subs too (because of limitations in the VBA-editor. A macro cant to be too big), so its impossible for me to post the entire macro...
if I leave the inputbox blank I get an Excel error. I.e. it says that the formula I tried to type contains an error..... Is the Type:=8 not working properly here?
Dim Addr As Range On Error GoTo Problem Set Addr = Application.InputBox( _ Prompt:="Enter or Select a cell in the last record", _ Title:="Select Last Record:", Default:=Selection.Address, Type:=8) If Addr Is Nothing Then Exit Sub Edit: I guess I should mention that I am trying to retrieve a cell reference from the user via an input box. This cell reference will help me determine the last record in the spreadsheet.
In Excel 2003 I have made a model for evaluating co-workers. The model consist of a number of different questions regarding performance. At the top of the sheet, the user have to select som data from a drop down list, and depending on the answer (upward or downward), som of the questions in the sheets is hidden or shown. For this purpose I have created this string of VB-code in the sheet:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$E$5" And Target.Value = "Upward" Then Rows("20:41").EntireRow.Hidden = True ElseIf Target.Address = "$E$5" And Target.Value = "Downward" Then Rows("20:41").EntireRow.Hidden = False ElseIf Target.Address = "$E$5" And Target.Value = "" Then Rows("20:41").EntireRow.Hidden = False
Private Sub Worksheet_Change(ByVal Target As Range) If Not (Application.Intersect(Target, Range("G9:BF94")) Is Nothing) Then With Target If Not .HasFormula Then .Value = UCase(.Value) End If End With End If End Sub
However when ever I select more than one cell which already has text in it and press delete I get a runtime error 13 and the debugger highlights this line:
I have created a workbook for external users that allows them to track data on a monthly basis and submit to me. Each spreadsheet has a code to sort names alphabetically. Here is the
Sub Button53_Click() Dim i For Each i In [B10:K309] If i.Value = 0 Then i.Value = "" End If Next ActiveSheet. Unprotect Password:="xxx" Range("B10:AB309").Select Selection.Sort Key1:=Range("B10"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom ActiveWindow.ScrollRow = 10 ActiveWindow.SmallScroll ToRight:=-5 Range("B10").Select ActiveSheet.Protect Password:="xxx", DrawingObjects:=True, Contents:=True, Scenarios:=True End Sub
Everything works great for the majority of users, but those who are using Excel 97 return a runtime error on the following line: If i.Value = 0 Then. This code was created in Excel 2000 since that was the software our office used.
Public Sub sendRow(myRow As Integer, destinationSector As Integer) '************************************************************ '1. Copy Row... Cols 2-7 '2. Find First Empty in new Sector '3. Paste Row on first new Row
Dim myBounds() As Integer Dim destRow As Integer Dim destRange As Range Dim cutRange As Range Dim y As Worksheet
myBounds = getSecBounds(destinationSector)
This subroutine is being called from the Worksheet_Change event, and should therefore have an active sheet.
I'm having an issue with a worksheet that I created. Apparently, every time that I go to open it, it gives me a Grey blank screen. Yet, I know the worksheet is behind this Grey screen. I went to full screen and I can see the work sheet in full view, but it always opens in this Grey screen. I'm not sure why its doing this, no other worksheets open in this matter. I have tried reinstalling excel and it still didn't fix this problem. But it is only happening with one particular worksheet. I'm sure it is just a setting that I might have changed, but I can't figure it out. The file isn't corrupt because the macros still work, I tested them.
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click() Dim filepath As String filepath = Range("A100") MsgBox ("File Appended") Workbooks.Open (filepath) Windows("CorrespondenceMaster.xls").Activate Sheets("Sheet2").Select Range("DesNo", "LocationPath").Select Selection.Copy Windows(filepath).Activate Range("A2").Select ActiveSheet.Paste End Sub
Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error... ______________________________________________ Runtime Error '1004':
Unable to set the Visible property of the Pictures class ______________________________________________
When I select Debug, it takes me to the line with Me.Pictures.Visible = False
Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?
