I am trying to select a group of cells in an inactive worksheet from code in a module but I keep getting a run-time error 9 message and I cant seem to find the syntax problem.
I pasted my code below and the error occurs in the last line before the end sub statement.
[Code].....
I was given a workbook with several bugs and asked to fix it and make it functional again. I was able to fix everything except for a runtime error 1004. On the debug it highlights the following code:
Code:
Private Sub ComboBox1_Change()
End Sub
Private Sub Worksheet_Activate()
LoadSheetNames "Compare_Session_Start", "Engineer*"
End Sub
Private Sub LoadSheetNames(strRangeForValidation As String, strDesiredCodeName As String)
[code]....
Anytime you select the base worksheet or a duplicate it shows the runtime error...
I am getting this error when trying to generate the link report ....
Debug tells me that this makes reference to a sheet is not there , I have checked and it seems to be present
It is an urgent issue as it is preventing me to generate link reports...
I have the following code that allow me to select all of the cells with the color same as the active cell within a selected range:
Sub SelectCellColor()
Dim CellColorFormat As Long
Dim RangeString
[Code]....
I'd like to ask how can I fix the error so that there will not be a limit of the number of colored cells in a selected area?
I want the code to determine if the cell before and after the active cell contains a value and if both these conditions are true to delete the active row.
I keep getting a runtime error 1004 when I try this...
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
Code:
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code]....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
I have a Petty Cash Workbook that consists of a Cash Receipts worksheet, and two separate credit card worksheets. I would like to be able to summarize the data from these three worksheets to a fourth worksheet called “Yearly Totals”. I’ve copied and modified code from Ron deBruin’s website but I’m not getting anywhere with it. I’m constantly running a Runtime ERROR 9 with this line:
View 2 Replies View RelatedVery new to VBA and having trouble with a simple macro running in 2003 that copies and pasts to another worksheet. Code as follows:
Private Sub CopyResults_Click()
'Select the filtered data and copy it
Range("A23").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Range("F19").Select
' Open the template and copy in the data
Workbooks.Open Filename:="C:Athens Verification DataTemplatesVerification Template.xls"
Workbooks("Verification Template.xls").Activate
ActiveSheet.Range("A1").Select
ActiveSheet.Paste
ActiveSheet.Range("A1").Select
Application.CutCopyMode = False
End Sub
When I run CopyResults, the sheet is opened and the data copied correctly, but I get a runtime error 1004 past method of worksheet class failed, with the line 'ActiveSheet.Paste' highlighted. Don't get this when I run the same macro in 2000.
I M Getting Run Time Error 1004 Method Range Of Object _ Worksheet Failed
Option Explicit
Private Sub cboPart_AfterUpdate()
'On Error Resume Next
[Code]...
I have the following macro who now return a runtime error 1004, paste method of worksheet class failed.
I don't know how to change it to make it work.
Sub Paste_TOP()..
this is some real simple code but for some unkown reason it keeps failing on me..
Sheets("All Work").Select
Cells.Select
Selection.Copy
Sheets("Sheet3").Select
Cells.Select
ActiveSheet.Paste
Sheets("All Work").Select
The second Cells . select doesnt work for some reason when i attach it to a button on the work sheet and i get the message
"runtime error "1004"
select method of range class failed"
but when i run just the macro it all goes smooth.
I have a workbook that contains part numbers and their components listed like below. There is always one empty row between the part number and the components, and then 3 empty rows between the last component and the next part number.
The number of components varies from sometimes only 1 up to 25. Currently, I select a part number and its components like B1:C5 and then I have a macro that copies it to another workbook. What I would like to do is somehow get the macro to automatically select the next set down, in this case, B9:C14, so I could copy every set over to its proper place with only one click of the button.
I am new to VBA and created the following code:
Sub UpdateSchedule()
'
' UpdateSchedule Macro
' Save changes to schedule, create import table for MRP, and timestamp.
'
' Keyboard Shortcut: Ctrl+Shift+U
[Code] ...
When I run it it tells me that "No cells were found and the debugger highlights the following line of code:
Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
I have tried inserting:
On Error Resume Next
Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
On Error GoTo 0
This makes everything work except the deleting.
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
Sheets("Sheet1").Copy After:=WB.Sheets(WB.Sheets.Count)
I recently copied in this sheet from another workbook, and deleted all of it's formula names, but I can't copy any other sheets now either.
The Run time Error 1004: Copy method of Worksheet Class failed pops up. What is weird is that I put in a msgbox and
MsgBox (WB.Sheets.Count)
returns a "1" though the sheet has about a dozen sheets within it. I've saved the workbook and even saved it as another name.
The sheet I imported has a sheet number of 77 while the previous last sheet was 23, could this be a cause?
I could use some assistance in creating a macro that will delete all and only text boxes on the active sheet. Some text boxes will be empty, but I still wish for them all to be deleted. Through searching the forums I see a similiar code, but it deletes all shapes on the active sheet:
View 8 Replies View RelatedThere are two columns of data. Column A is "Group name" and is initially empty. Column B is a list of words
Here is what I am trying to do:
1) prompt the user for 3 input values
2) input value 1 and 2 are COMMON words that i wish to filter through in column B with "filter contains" value 1 or value 2
3) after the filter, i wish to select ALL VISIBLE cells in column A and append the Group Name to each cell
I am having an error in the following line of my code:
Set MyRange = Sheets("BackData").Range("rsJobTypes").Range(Cells(2, 1), Cells(cnt, 1))
If there is another sheet that is active, besides for the "BackData" sheet, I get an application error. I would like to know how I can reference this range without having to activate the sheet.
I tried adding "thisworkbook" before "sheets", but it did not seem to work.
I am trying to protect cells & password protect my workbook on closing. Here is my code. Not only is the cell locking code not working, but it is also preventing the code from re-hiding the columns ("P:P,R:R,W:W,U:U,AA:AA"). Here is my code; I've tested it on a blank sheet & it was working:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ScreenUpdating = False
Application.EnableEvents = False
[Code].....
I got a macro connected to a button that select empty cells within a range and fill them with the value above. The code looks like this:
Code:
Range("A1:A10").SpecialCells(xlCellTypeConstants, 23).Select
Selection.Resize(, 4).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
[Code] .......
If you press the button twice you will get run-time error 1004 becuase Excel can't find any empty cells.
I want a function that counts blank cells before running the macro. If there are no blanks I don't want to execute the macro. That is to avoid run-time error 1004.
So for example if I have a1, a5, and a6 selected, I want to be able to select row 1, 6, and 7 in one action. Is there a hotkey for this, and if not what macro could I use?
ActiveCell.EntireRow.Select only gives me one row. I want to be able to select all of them at once.
I have data that i import on a daily basis, the data can range from a couple of rows to thousands,
What I need to do using VBA is select the active cells, where cells in row ''G'' is blank then delete the entire row where that cell is.
I attached my workbook so you guys can easily take a look.
In this workbook I have 2 hidden worksheets.
To start off, you click the Add Week button, put in a date (mm-dd-yy), that brings up the sheet thats named with the date you just put in the text box. (Which happens to be placed in the wrong spot) In that sheet that appears theres a button to "Delete last" which is suposed to delete the last sheet in the worksheet but the new sheet gets placed between the existing charts. Thats my first problem.
Next, when you hit the delete button, my VBA code is set to make one of the hidden sheets visible so it can delete one of the rows.
Conditional formatting. I want to change the color of a group of cells based on data in another group of cells. Example:
If cells G8 and G9 (which are merged) are between 80% and 94%, then I9,I10,I11 (which are merged) will turn Yellow. Also, under the same scenario, IF G8 and G9 is greater than 94%, then cells I9, I10, I11 will turn Red.
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
I need to get this macro to process the cells for every worksheet in a book rather than just the active one
Public Sub test()
Dim Lr As Long, i As Long, x As Range, _
v1 As String, v2 As String, v3 As String
Set x = ActiveSheet.Cells.Find("*", searchdirection:=xlPrevious)
If x Is Nothing Then Exit Sub
Lr = x.Row
Application.ScreenUpdating = False
For i = Lr To 1 Step -1
v1 = Cells(i, 2)
v2 = Mid(Cells(i, 3), 1, 1)
v3 = Cells(i, 4)
If v1 "OP00" Or v2 "L" Or v3 "CC" Then Cells(i, 1).EntireRow.Delete
Next
Application.ScreenUpdating = True
End Sub
My company has complicated time sheets because we have several tasks that are billed differently to different people. Once a month we have to sit down and compile everything from several forms and so forth. I have created a worksheet that pulls all the numbers together so that they can simply be copied and pasted into our reports. The hope was to simply copy this worksheet into a time sheet workbook and it will pull out all of the correct numbers. Although all the time sheet workbooks are set up the same way, whenever I copy the file into another time sheet workbook the program keeps its references from the workbook it was in. Make sense? is there a formula that I can insert into an array to tell it to pull the information from the worksheet with the same name, but in the active workbook?
here is one of the equations I am working with:
{=TRANSPOSE('1st week'!A10:L48)}
so it would look something like this maybe
{=TRANSPOSE('[active workbook]1st week'!A10:L48)} but this doesn't work of course.
I am trying to write VBA code that groups cells between blank rows and inserts a message if a string of text (a name) is missing from the entire group. I want the code to search cells in column A and group the cells between blank cells. Use the name I input in an input box as the search criteria and insert a message in the Column C next to the last blank cell in the group and then move on to the next group and highlight the cell in red with bold text. I am including a spreadsheet with an example of what the sheet should look like before and after the code is run.
View 11 Replies View RelatedI am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I seem to be going round and round in circles with this, but I'm sure it should be easy.
I'm just trying to select a range of cells in Sheet2 of my workbook.
I've tried many different bits of code, including:
Dim namesTotal As Integer
namesTotal = 2500
Sheets("Sheet2").Activate
ActiveSheet.Range(Cells(1, 1), Cells(namesTotal, 8)).Select
(According to the Microsoft website, this is supposed to be the way to do it?)
The code thats generating the error is the following:
For Y = 8 To 131
TmpDate = Empty
Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
TmpDate = Range("A1").Value
For Langd = 1 To Len(TmpDate)
TmpChar = Mid(TmpDate, Langd, 1)
If Not TmpChar = " " Then
TmpComp = TmpComp + TmpChar
End If
Next Langd
TmpDate = TmpComp
TmpComp = Empty
If Len(Dag) = 1 Then
Dag = "0" + CStr(Dag)
End If
Macro continues before the Next-statement...
(it might not be good programming, but I think it should work).
A little explanation to the code.
I have a spreadsheet located on the intranet that has values I need in my spreadsheet. These figures are sorted by date, so I search for the date to find the right figures.
The line Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
works prefectly. I can see the value in my spreadsheet in the cell A1. its the next line that causes the error "Type mismatch".
The value I get from the intranet spreadsheet looks similar to this:
"1 Jul 2006 " (note all the spaces).
What I do is just run it through a loop and cut of all spaces so it will look like this: "1Jul2006" to be sure I dont miss a space or anything.
Now to the funny part.
The error only happens at runtime on the first go.
If I chose to END the macro then and there, and then run it again from the top it works perfectly.
If I set a stopsign to debug the code, it works perfectly on the first go too.
Can anyone explain to me why that happens??
I know enough about programming to handle my syntax errors and so on, but I cant see anything wrong in this one...
Please note that this isnt the the entire code.
I'm building a report on 12 diffrent spreadsheet. The main macro is almost 2000 rows of code, and it call other Subs too (because of limitations in the VBA-editor. A macro cant to be too big), so its impossible for me to post the entire macro...