Transpose Command Shows Error

Mar 6, 2012

If Range("a7").Value = "" Then
Range("A1:A6").Copy Destination:=Sheets("sheet1").Range("A" & Rows.Count).End(xlUp).Offset(1).PasteSpecial xlPasteAll, Transpose:=True
'Range("C1").PasteSpecial xlPasteAll, Transpose:=True
End If

This command shows error?

View 2 Replies


ADVERTISEMENT

Command Button Shows Two Different Reports

May 21, 2007

i have this userform which has textboxes. Every information in the textboxes are linked in the two kinds of reports namely: Report 1 and Report 2.

After filling the textboxes, what are the codes that i can use so that the command button 'Generate Reports' will display the Report 1 in Sheet 1 and Report 2 in Sheet 2?

View 9 Replies View Related

Quick Access Toolbar Command - Paste Values / Transpose

Mar 11, 2014

I would like to create/use a copy command in the Quick Access Toolbar that combines Paste Values and Transpose into a single command. Have tried recording a macro but it becomes specific to the individual workbook that I'm accessing and it copies the formula from that last cell that I copied from. Problem is that I have 19 workbooks to deal with and would like to save some keystrokes.

View 4 Replies View Related

Data Validation List :: Shows #VALUE! Error

May 15, 2007

I'm working on a function that gets its values from a Data Validation List.

My problem is that I want the function to return a value when an item in the list is selected and another if the user did not make a selection... just a basic if....then....else ... but the cell where I call this function shows the #VALUE! error while no item in the list is selected.

I call the function like this:
=myFunction(RC[-5], RC[-2])
where RC[-5] is the Data Validation List and RC[-2] is a cell where the user should enter a number

why I'm getting the #VALUE! error instead of my message

The function basically looks like this:

View 9 Replies View Related

Formula Shows An Error Once Source Is Closed

Nov 30, 2007

I am linking two worksheets together. Formulas work fine except when I close the source sheet, it turnes into #REF error. I saw in one of the posts that you can not use INDIRECT formula on closed workbooks (INDIRECT is a part of the formula in my sheet) and downloaded the changingExternal. zip file as directed. Although, after staring at it for a while, I realized that I had no idea as to what was going on in there.

View 3 Replies View Related

Shows Error In Autofilter Code If Criteria Not Match

Jun 13, 2013

VB:

Range("a1:n" & row_end).AutoFilter 13, "ABC"

If the value "ABC" not found in table, it shows error msg, In my file data="ABC" avail, sometimes not.

View 2 Replies View Related

Select Base Worksheet Or Duplicate - Shows Runtime Error

May 2, 2014

I was given a workbook with several bugs and asked to fix it and make it functional again. I was able to fix everything except for a runtime error 1004. On the debug it highlights the following code:

Code:
Private Sub ComboBox1_Change()
End Sub
Private Sub Worksheet_Activate()
LoadSheetNames "Compare_Session_Start", "Engineer*"
End Sub
Private Sub LoadSheetNames(strRangeForValidation As String, strDesiredCodeName As String)

[code]....

Anytime you select the base worksheet or a duplicate it shows the runtime error...

View 2 Replies View Related

Runtime Error Command In Userform

Feb 17, 2012

I am experiencing a run time error with my command in a UserForm.

Run time error '9':
Subscript out of range.

Error occurs on the following row:
With Worksheets("Math Lineup").Range("D3")

Below is the code I am using:

PHP Code:

Private Sub CmdAddWrestler_Click()Dim RowCount As LongIf Me.txtWrestler.Value 
= "" ThenMsgBox "Please enter a name", vbExclamation, "Wrestler Name"Me.txtWrestler.SetFocusEnd IfRange ("D4") 
= txtWrestler.TextRowCount 
= Worksheets("Match Lineup").Range("D3").CurrentRegion.Rows.CountWith Worksheets("Math Lineup").Range("D3")    
.Offset(RowCount, 0) = Me.txtWrestler.Value End With txtWrestler = "" End Sub 

View 2 Replies View Related

Runtime Error 1004 Command Is Not Available In Shared Workbook

Mar 15, 2013

i have this code for copying diffrent ranges of cells and saving it in different workbooks:

Sub NewCopy()
Dim strFileName As String
Dim range1 As Range
Dim rng1 As Range, rng2 As Range, myMultiRanges As Range

[Code].....

the problem is when is share the workbook, it generated the runtime error '1004' Command is not available in a shared workbook... make it work even in a shared workbook.

View 3 Replies View Related

Vlook Up: Combobox Shows The The First Column (only 1 Of Each) And The Second ComboBox Shows Me The Secondary List

Jun 9, 2006

I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.

View 4 Replies View Related

Run Time Error 1004 When Selecting Range On Another Sheet Using A Command Button

Nov 20, 2009

Run Time Error 1004 when selecting range on another sheet using a command button. I have created a command button that plays the following macro.

View 2 Replies View Related

Press Command But And Execute The Code Assigned To Another Command Button

Apr 14, 2009

Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).

View 9 Replies View Related

Shell - Adding Another Command To Forfiles Command?

Apr 19, 2014

I am playing around with the Forfiles command (being called from Excel via Shell)..

I can't for the life of me get it apply a second command (such as getting the file size of each file)..

For example:

VB:
Private Sub CommandButton1_Click()
Dim Z
Z = Split(CreateObject("wscript.shell").exec("cmd /c forfiles /P C:UsersapoDesktopTextFiles /S /M *.* /d

[Code]....

The end result being the filename and the filesize shown..

View 4 Replies View Related

Excel 2007 :: Using Search Command With IF Command

Jun 20, 2013

Excel 2007

I have this simple formula: =IF(SEARCH("ABC",BQ239,1)>0,"Found", "Not Found")

Instead of saying Not Found when the value is not in the cell BQ239 text string I get #VALUE! returned

how do I get it to say "Not Found"? I searching for a substring that can be anywhere in the string.

View 2 Replies View Related

0.00 Shows As (0.00) Sometimes

Dec 10, 2009

why my zero totals sometimes show as 0.00 and other times as (0.00), when they have the exact formula?

View 2 Replies View Related

Formula Shows DIV/0

May 12, 2008

got this quite complciated formula.

any of the cells specified can be blank at start of spreadsheet
is there a way to hide the DIV/0 error from appearing

this is the formula:

=((((((SUM(C11:C14)*(100%-R2)+(SUM(ThroughputFormulas!C33:C36)*R2)*(L2/30))/1000)*N2)*3600)*P2))/(SUM(C39:C45))/1024/8

View 9 Replies View Related

PRODUCT Shows A Value Even If 0*#

Jun 8, 2006

PRODUCT shows a value even if 0*# =IF(H15*I15=0,"",PRODUCT(H15,I15))

View 5 Replies View Related

What Command Is Executing Or What Was Last Command Used

Feb 17, 2010

Is there any way to tell (from VBA) what GUI command is currently in progress or what the last command used was?

On a wish list perhaps: Application.LastCommand and/or Application.CurrentCommand

Let's say I'm in the "Sheet_Change" event and want to know what caused the change. Was the event triggered by "Delete", "Paste", "Keystrokes" ...

AutoCAD VBA has "Begin_Command (CommandName as String)" and "End_Command (CommandName as String)" events which I find very useful. Basically I'd like to emulate that to the greatest extent possible.

Application.Caller does not seem to work for the stated purpose. I've been searching for a workaround by means of reading the "Undo Stack". Numerous articles written by experts state that the undo stack is not accessible from VBA.

I've considered reading the text from the "Undo" button's caption but it just seems like such a hack ... not that this whole idea isn't a hack

View 9 Replies View Related

COUNTIF Formula Which Shows A %

Mar 5, 2009

I already have a conditional format which is working OK. I would like to put a formula in the cell so it shows a % so currently it would be 100% as there is 3 cells below showing 3 greens.

Alternativily each colour is worth a value - Green = 1, Amber = 2, Red = 3. So Cell I3 would show 3.

View 2 Replies View Related

Excel Repeatedly Shows The Same Name

Oct 14, 2013

I have a problem with my formula. As you can see, i want to get the CIM number of the Team Leaders (TL Name) when i change the dropdown list of the campaign. But what im getting is the repeated CIM numbers.

Here's my formula:

=IF(ISERROR(INDEX('Team Data'!$F$2:$F$5489,SMALL(IF('scorecard (OM Search)'!$C$12='Team Data'!$E$2:$E$5489,ROW('Team Data'!$E$2:$E$5489)-MIN(ROW('Team Data'!$E$2:$E$5489))+1,""),ROW(A1)))),"",INDEX('Team Data'!$F$2:$F$5489,SMALL(IF('scorecard (OM Search)'!$C$12='Team Data'!$E$2:$E$5489,ROW('Team Data'!$E$2:$E$5489)-MIN(ROW('Team Data'!$E$2:$E$5489))+1,""),ROW(A1))))

View 1 Replies View Related

Msg Box Which Shows Content In A Cell

Feb 27, 2014

I want a macro to show a message with a content in the cell B3.

For EG: "Rec as of 'B3' is created"

This has to be the message and 'B3' has to be the content in the cell B3.

I tried doing it but i am unable to show the content in B3 in the message.

View 3 Replies View Related

Address List Shows Value 0

May 31, 2009

I'm using Excel 2007 and have created a spreadsheet for invoicing. I have created a dropdown list which then imports the address data using vlookup.

My problem is this. If there is no text in say, address field 4 the resulting field in the invoice shows as a 0 eg,

NAME
ADD1
ADD2
ADD3
0
POSTCODE

Is there a way to move the Postcode to the empty cell showing 0? and/or how do I make the cell to show blank instead of a 0.

View 6 Replies View Related

Formula That Only Shows Data Only If Different From Above?

Jun 19, 2014

I am trying to create a basic invoice spreadsheet.

On worksheet 1, I have days of the month A4 to A35. Columns B, C, D, E are headed.

Every hour of work I would enter a " 1 " in the correct cell for the day. For example, 1 hour, every segment of the day, I would enter "1" in cells Bx, Cx, Dx and Ex. This continues for the month;

On a 2nd worksheet, this is neatened up, and I have added formulas to work out the cost and type of call;

On the third worksheet, I want to display roughly the same, however when there has been no work on the day (ie the date displays "None" and the adjacent cells show: blank, blank, blank, blank, £0.00), I want it to skip the cell and display the next date which has data to show (ie a date). The data on the adjacent cells needs match with the date (in the same way as physically deleting a 'non worked' whole row).

This then on the invoice worksheet would look neat and display only the days actually worked.

What formula(s) could I use to do this.

View 1 Replies View Related

What I Print Looks Different From What My Screen Shows

May 6, 2008

I have a WYSIWYG problem: what I see on the screen is NOT what I get out of the print job.

I commonly have the problem when working with Excel objects (any kind of shape, text box, line, graph) in that the layout looks great on the tab that I created, but when I go into PrintPreview or actually print it out, the shapes don't quite align with what I had built in the tab. Where I thought I had lines joining, the print out shows them crossing at other points. If I then go back to the tab and look at the layout on the regular screen, it looks fine.

This problem can be easily understood if you try to create a triangle by drawing three lines (non-overlapping lines that cross only at the vertices). Note that the lines either prematurely cross, or don't intersect at all when you print it out.

THis problem is even magnified when using the camera function to take a "snapshot" of a graph or other objects. In fact, it has the tendency to even "mess up" the graph's formatting, regarding the arrangement of titles and axes (often making them overlap).

View 9 Replies View Related

File Shows RandBetween

Sep 26, 2008

I am trying to generate random numbers between upper and lower limits (eg 120,140). The randbetween function in the help file is ideal....but when I use it it generates a #Name error.

(I am using Excel 2002 and have the analysis toolpak add in ticked).

View 9 Replies View Related

Formula Ranges Shows #REF!

Oct 30, 2008

Hi i have the following SUMPRODUCT formula which works as required, but when i clear the raw data and apply new raw data and apply macro that sorts my data, then all the ranges in the formula shows #REF!

=SUMPRODUCT((Raw_Data!C6:C5000=Summary!$B10)*(Raw_Data!A6:A5000=Summary!C$8)*(Raw_Data!E6:E5000>2))

View 9 Replies View Related

Clean Up A Template That Shows #DIV/0

Jan 10, 2009

Excel 2007

I am trying to clean up a template that shows #DIV/0! in the cells that contain the formula below, when there is no value present in the NamedReference.

=SUM((B6/1024)/NamedReference)

View 9 Replies View Related

Chart Menu Bar Always Shows

Aug 9, 2006

I need some vba code to

a) determine which of excel's menubars is active (Worksheet Menu Bar or Chart menu Bar)

b) delete the controls ie File, Edit, View etc menus from that menu bar

c) restore the controls to that menubar on workbook close

Normally this wouldn't be required but my version of excel is 2002 which has the Worksheet Menu Bar active and the work version is excel 2000 which has the Chart Menu Bar active.

I don't know why the Chart Menu Bar is active on the work system as there are no charts in my project.

Most of the development takes place at home so i need to be able to use vba to perform the above tasks

The menubar itself must remain active so i can add a custom menu to it.

View 4 Replies View Related

UserForm Still Shows After Hiding

Nov 30, 2006

I have 2 forms (A and B). Form B is initialized with values from a global array created in form A.
When closing the B form it's still visible.
I want it to dissapear.

The B form is opened from the A form


Private Sub cmd_ok_Click()
frm_B.Show
End Sub




When closing the B form it's still visible (modal)

'Within form B
Private Sub cmd_cancel_Click()
Unload Me
End Sub

View 9 Replies View Related

Opening Worksheet-nothing Shows

Mar 4, 2007

I'm having an issue with a worksheet that I created. Apparently, every time that I go to open it, it gives me a Grey blank screen. Yet, I know the worksheet is behind this Grey screen. I went to full screen and I can see the work sheet in full view, but it always opens in this Grey screen. I'm not sure why its doing this, no other worksheets open in this matter. I have tried reinstalling excel and it still didn't fix this problem. But it is only happening with one particular worksheet. I'm sure it is just a setting that I might have changed, but I can't figure it out. The file isn't corrupt because the macros still work, I tested them.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved