VBA Worksheet Select Error
Jul 14, 2009
I attached my workbook so you guys can easily take a look.
In this workbook I have 2 hidden worksheets.
To start off, you click the Add Week button, put in a date (mm-dd-yy), that brings up the sheet thats named with the date you just put in the text box. (Which happens to be placed in the wrong spot) In that sheet that appears theres a button to "Delete last" which is suposed to delete the last sheet in the worksheet but the new sheet gets placed between the existing charts. Thats my first problem.
Next, when you hit the delete button, my VBA code is set to make one of the hidden sheets visible so it can delete one of the rows.
View 11 Replies
ADVERTISEMENT
Feb 26, 2014
I am trying to select a group of cells in an inactive worksheet from code in a module but I keep getting a run-time error 9 message and I cant seem to find the syntax problem.
I pasted my code below and the error occurs in the last line before the end sub statement.
[Code].....
View 12 Replies
View Related
May 2, 2014
I was given a workbook with several bugs and asked to fix it and make it functional again. I was able to fix everything except for a runtime error 1004. On the debug it highlights the following code:
Code:
Private Sub ComboBox1_Change()
End Sub
Private Sub Worksheet_Activate()
LoadSheetNames "Compare_Session_Start", "Engineer*"
End Sub
Private Sub LoadSheetNames(strRangeForValidation As String, strDesiredCodeName As String)
[code]....
Anytime you select the base worksheet or a duplicate it shows the runtime error...
View 2 Replies
View Related
Sep 17, 2012
I am getting this error when trying to generate the link report ....
Debug tells me that this makes reference to a sheet is not there , I have checked and it seems to be present
It is an urgent issue as it is preventing me to generate link reports...
View 9 Replies
View Related
Oct 28, 2008
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies
View Related
Jul 23, 2008
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
View 9 Replies
View Related
Apr 16, 2009
when i write the following line to open the recordset then it gives me syntex error.
rs.Open "select batchno from tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
and if i write the following line then it works fine.
rs.Open "tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
View 8 Replies
View Related
Aug 1, 2014
I have 30 different cases working well in one module so far. Now I need to add some more cases, but the system doesn't allow me to start defining any new cases under Select - Case, it shows: compile error: procedure too large.
I'm thinking maybe there's a way to combine multiple cases like Case 30, 31, 32 in one statement, and use if, else to define each one?? So the coding won't return the "Procedure Too Large" error? see my original coding as below:
counter = 0
colkey = 0
For Each cont In PriceForm.HaveFrame.Controls
If TypeName(cont) = "CheckBox" Then
counter = counter + 1
check = cont.Value
If check = True Then
[code].....
View 9 Replies
View Related
Apr 13, 2007
I get an application defined or object defined error at the select statement 1004...I know I know I shouldn't be selecting in code so I'll fix that but why can't I set the range?
NumRows = Sheets("Timelines").Rows.Count
LastColumn = Sheets("Timelines").Range("A1").End(xlToRight).Column
LastRow = Sheets("Timelines").Range("A" & NumRows).End(xlUp).Row
Sheets("Timelines").Range(Cells(1, 1), Cells(LastRow, LastColumn)).Select
TIA, Charlie Brown.
View 7 Replies
View Related
Jan 12, 2007
I have a workbook that I am getting the error select method of range class failed. I am not sure what I have done wrong? I have a worksheet called Unit Tools that I would like to import the information in column B from another worksheet called Tool Catlog. This is the code that I used and I am getting a run time error 1004 with the above message. I am not really great with VBA but I am learning from the examples and questions that people have put on here.
Private Sub CommandButton4_Click()
Sheets("Tool Catalog").Select
Range("B3:B173").Select
Selection.Copy
Sheets("Unit Tools").Select
Range("A3").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
View 5 Replies
View Related
May 20, 2014
I want to add a msgbox with a no selection error to a multi select listbox I have. For a dropdown I just use "if .ListIndex =-1" but listindex doesn't seem to work. I'm playing with .selectedindex but it's not playing ball
View 4 Replies
View Related
May 11, 2007
I'm getting a Run-time Error 1004 when using a Range(rangestring).Select.
It only seems to occur when I'm trying to select more than 35 cells. Up until 35 it works just fine.
My code is designed to select individual cells in a worksheet based on user selections from a list, and as I said, works fine unless they select more than 35 items.
Is there a limit to how many cells can be selected using Range...Select? If so, I can't find it documented anywhere.
View 14 Replies
View Related
Oct 22, 2008
I have a macro that opens a specified woorkbook that changes every month. There are formulas which are pasted to range I1 of the new workbook to calculate the totals on this sheet. Everytime i run the code though, I get an error that says "Select method of range class failed" and Range("I1").Select is apparently the error.
View 7 Replies
View Related
Jan 27, 2013
Why I'm getting the above error when I try to copy and sort data into a workbook?
I'm using this:
Code:
Sub GetData1()
Dim SaveDriveDir As String, MyPath As String
Dim FName As Variant
SaveDriveDir = CurDir
MyPath = Application.DefaultFilePath 'or use "C:Data"
[Code] .......
To import the data and then these lines to copy the unique records to a range:
Code:
Sheet33.Range("C1").Select
Sheet33.Range("C1:C1000").AdvancedFilter Action:=xlFilterCopy,
CopyToRange:=Sheet33.Range("S1"), Unique:=True
But the above lines are highlighted when I get the error.
View 1 Replies
View Related
Apr 25, 2013
I'm having problems implementing a Select Case statement. Keep getting case without select case at Case condition2.
Code:
Select Case Condition
Case condition1
If Cells(rsRow, rsCol).Value = "" Then
Cells(rsRow, rsCol) = TextBox2.Value
[Code] .......
View 3 Replies
View Related
Jul 23, 2014
Macro has been working fine for ages suddenly have received this consistently?
It's not debugging to allow me to see the route of the problem.
i've googled and seen it's normally a use of select but can't see any issue in my code or understand why it would work for months and now stop.
note: also after i click Ok on the error the macro seems to continue running and data is pulled through. ...but this message comes up every time so it's questioning the reliability of the data it's pulling.
View 4 Replies
View Related
Aug 3, 2012
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
View 2 Replies
View Related
Aug 22, 2012
When I try to run following code, I get error
Run-time error '1004': Select method of Range class failed
Workbooks("Book1").Worsheets("Sheet1").Range("A1").select
however if I split the code like below it works perfectly
Workbooks("Book1").Worsheets("Sheet1").Select
Range("A1").select
View 3 Replies
View Related
Jul 28, 2006
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LChangedValue As String
Dim LTestValue As String
Dim smessage As String
'Test first 7 rows in spreadsheet for uniqueness
Lrows = 8
LLoop = 2
'Check first 7 rows in spreadsheet
While LLoop <= Lrows.........................
View 3 Replies
View Related
Apr 7, 2007
I get the following error: Run-time error '1004': Select method of Range class failed at the following code line:
Worksheets("Sheet1").Range("A6").Select
View 4 Replies
View Related
Mar 22, 2007
I need to write a macro that will start at worksheet A, then select the next worksheet, and the one after that, etc. Worksheet A will always be the same, but the following worksheets will always be different.
View 9 Replies
View Related
Aug 19, 2009
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
View 3 Replies
View Related
Mar 26, 2014
I have the following code that allow me to select all of the cells with the color same as the active cell within a selected range:
Sub SelectCellColor()
Dim CellColorFormat As Long
Dim RangeString
[Code]....
I'd like to ask how can I fix the error so that there will not be a limit of the number of colored cells in a selected area?
View 2 Replies
View Related
Nov 19, 2008
I think this may be a little difficult (for me at least!) but would it be possible to have a list of the open workbooks popup when I run my macro, so that I may select which workbook to run it on?
The macro itself just does some formatting of the sheet, but it is contained in a master file.
View 5 Replies
View Related
Feb 27, 2009
If I want to select a cell in another worksheet I'm currectly doing this:
View 3 Replies
View Related
Oct 23, 2009
I am using the below code which works perfectly in same sheet. But instead of range a1 and b1 in the same sheet (bold one), i want to use range a1 and b1 of sheet2. Range "Nazim" is named range in sheet1. And this code will be put in sheet1.
View 2 Replies
View Related
Nov 19, 2009
I have a workbook with around 350 worksheets. A column in the main sheet contains a list of part numbers which correspond to the names of the worksheet tabs. When a cell on the main sheet containing a part number is selected I would like a macro to find the corresponding worksheet, move that worksheet to the end of the row of tabs and open it.
I am using excel 2007
View 12 Replies
View Related
Jan 30, 2012
I am trying to run some code when a worksheet is selected.
I'm doing this using a macro currently (code below), but this requires that i use a quick menu button and i would like to make it a form button and assign a macro to it (so i can distribute the file without everyone having to create a menu button).
I would like to replace (or modify) the code below to select any sheet other than the ones named "a" and "b".
Code:
Sub ImportAlarms()
Dim thisSheet As Worksheet
Dim targetSheet As Worksheet
On Error GoTo failed
Set thisSheet = Application.ActiveSheet
Set targetSheet = Sheets(TARGET_SHEET)
[Code] .......
View 2 Replies
View Related
Sep 2, 2013
I have a user form containing a drop down list and two text boxes. The drop down list contains at the moment 2 items (address 1 and address 2) I have two worksheets,1st named address 1 and 2nd address 2. So far I have it set up so that the information enter in to text box 1 and 2 plus whichever one of the address is selected from the drop down list is entered in to the next available blank row on the active work sheet. What I would like to achieve is when address 1 is selected from the drop down list all of information is added to sheet 1 in the next blank row, same for address 2, this would be enter into sheet.2
All of the above would run from a command button (Enter)
View 2 Replies
View Related
Nov 5, 2007
how do you select a worksheet using a cell value
in cell a1 i have a random number we shal say it is 57
in cell b1 the same we shall say it is 8
i need to select worksheet a1 and cell b1
sheet57!8
sheet(a1!b1)
View 9 Replies
View Related
