I would like to select a cell in a range a1:h5 numbered 1-31 (days in a month)and return the selected cells value in another cell.
What formula would I put in the cell where I want the value of the selected cell?
I have the following table of data...
ABCDLetter--100.0%-100.0%-----100.0%----100.0%-100.0%---100.0%---100.0%---100.0%---100.0%--0.7%99.1%0.2%-
I would like to populate the Letter column with A B C or D depending on which contains the highest value.
I have row of dates and underneath those dates I have a row of numbers. The numbers count down. For example:
[Code] .....
At the end of the row I want a cell to return the date that the row first started going negative at. In this example, it should display 10/31/2014 (for when it went to -60).
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
How can I change the font color or highlight cell A1, when I select cell A2. Cell A2 is still blank, no value entered yet. I also would like cell A1 to return to original font color or no hightlight when cell A2 is no longer selected (active), whether a value is entered or not in cell A2. Let me clearify, (A1 thru N1) and (A3 thru N3) have diferent dates and the font color is white, as is the cell too. Therefor you can not see the dates in (A1 thru N1) or (A3 thru N3).
However, when any cell (A2 thru N2) or (A4 thru N4) is selected (example A4), the cell above it (cell A3) changes font color or highlights, so the date can be seen in (A3). But when cell (A4) is no longer selected the above cell (A3) hides the date (changes back to white font on white cell). Data or a value is not necessarily entered into (A4) for (A3) to change. (A4) is only selected to show the date in (A3). But if data or value is entered into (A4), the date in (A3) will still be seen until (A4) is no longer selected/active.
My data I need to copy begins as always from cell A5 and keeps going till A16.
I need to copy this data but only from A5 to A15. I always delete the last cell.
The number of rows is not always the same. Sometimes my data runs till A26.
How can I copy this data except the last row?
What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.
I would also be open to a solution where you simply mouse over a cell to see a comment/message.
my spreadsheet to return the word unit if cell a18=1 or the word units if its over 1 but i also want the cell to remain empty if there is nothing input into cell a18 is this possible
how can i select the cell to the right in a macro? i want to runa command in the cell to the right of the one i'm in after a caommand has taken place there
i.e.
1st command run in col b following by selcting the col c and running another command there
i have this formula in cell e28 =IF(B28<>"",LOOKUP(B28,STOCK!A1:A500,STOCK!B1:B500),"") and when its empty it returns a blank cell
but in cell e29 i have exactly the same formula =IF(B29<>"",LOOKUP(B29,STOCK!A1:A500,STOCK!B1:B500),"") but i returns #n/a
why is this and how do i stop it i want the cell to be empty unless there is a code entered in b29 in which case it will look up the relevant info for me
I want to copy every other cell in a row that isn't blank to another sheet. I am able to copy every other cell by using
=INDEX(Sheet1!$A1:$J1,2* COLUMNS($A$1:A$1)-1)+1) f
From this thread, by specifying a very long range. But the problem with this is that cells in sheet2 are filled with zeros when sheet1 has empty cells. I have to export the excell file to csv, I don't wan't trailing zeros or ,,,.
I wish to use an InputBox to select one cell in a row and then insert an entire row at that position. What is the VBA code to do this?
View 2 Replies View RelatedI am sure this has been asked -and answered- before.
I need to select a cell, e.g. C1000, and change the view, so that I see C1000 on top of my spreadsheet.
range("C1000").select clearly does not accomplish what I want.
I currently have
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Target.Address = "$H$1:$K$1" Then
Call FINALIZED_BY_QC
End If
End Sub
In my sheet code. In a macro I have some code to unlock these cells
Code:
Range("$H$1:$K$1").Select
Selection.Locked = False
But the code is trying to select these cells and run the macro. At this point I just want to simply unlock the cells not select them...
I'm trying to select a cell in a range that matches the value in a combobox on my userform.
My combobox is populated during userform initialization with all the data in column A.
I want to select the cell that matches the combobox value.
I just want to grab the information in C1, then select cell E1, find next blank cell in that row and paste the information. It keeps giving me a runtime error on the line that tries to find the next empty cell.
Code:
Private Sub CommandButton1_Click()
Range("C1").Select
Selection.Copy
Range("E1").End(xlToRight).Offset(0, 1).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
I have been searching for a way to select the next blank cell in excel. I just cannot get my code to work. Here is what I have so far:
Windows("Maintenance MCS_BP_R2.xls").Activate
Application.CutCopyMode = False
Selection.Copy
Windows("Scorecard.xls").Activate
Range("C2").Select
Selection.End(xlDown).Select
ActiveCell.Offest(1, 0).Select
ActiveSheet.Paste
ActiveSheet.Paste
Application.CutCopyMode = False
Range("C6").Select
I want to paste into cell A1 of Sheet1, but without selecting that cell first. This code works, but it selects the cell:
Range("A1").Select
Sheet1.Paste Range("A1")
I've tried different variations such as:
Sheet1.Range("A1").Paste Range("A1")
or
Sheet1.Range("A1").Paste
but they result in errors.
This should be so simple (I would have thought), but so far I'm struggling.
Using Range / Offset or something similar, I want my macro to select a certain cell (which is dependent on the data in another cell) on my worksheet so that the user can then input data into the chosen cell.
Something along the lines of:
Range("A1").Offset(23 + t4, 1).Select
[where cell t4 contains a number which dictates how many lines down I want it to jump]
Basically, I want to use look in one cell to get a value then in a table look in a coloum to find the same value then return a value from a different column in that row.
This is to organize groups of children participating in an event.
See the attached spreadsheet for details.
Groups example.xls
I am looking to return the larger value of 2 cells into a seperate cell.
View 2 Replies View RelatedI had this problem a few days ago and NVBC suggested Text to Columns, which worked initally but didn't seem to 'save' or stick... also, I'm not sure what is causing the problem to begin with. It was my understanding that Excel couldn't return a truely 'blank' value. If a cell was blank or empty, Excel still 'sees' it as Zero. WHY then, for the Love of Gummi Bears, will Excel not calculate my formula. It's a simple formula!
=A13+B13
I've tried
=SUM(A13+B13)
I've tried
=IF(ISERROR(A13+B13),"",A13+B13)
But if don't TYPE in a 0 or a number, then it just does nothing. 50 + 0 = should be 50 not blank or #VALUE!. 50 + Nothing = should be 50 not blank or #VALUE!
Attached is a small copy of what I'm trying to do. I've double checked that all number cells are formatted to numbers, not text. I tried the Data:Text to Columns trick. I've tried Tools:Options:Show Zeros. I've tried Manual and Automatic Calculation. They shouldn't have to type in 60 cells of Zero to get the simple calculation.
I'm linking one sheet in a workbook to another. The formula is simple,
='Link 1'!E1
If there is data in the cell, it replicates it which is what I'm after. However if there is no data in the cell it returns a "0", not what I want at all.
I am trying to return a cell with a simple yes or no answer and having a little difficulty.
I have entered the following formula which is returning #NAME
=IF(E4<=1.25,ORH4<=0.01,yes)
Calculation needs to be as follows:
Install Cost <1.25 and Profit atleast 0.01
The YES NO needs to be in the Invite? column
I have a current formula using SUM formulas obviously in the answer cell the answer is returning 0 due to no data inputed, how do i make the cell show empty.
eg. =SUM(A1*A3) returns answer 0 need cell to be blank.
I have a sheet containing collums with month an weeks. I try to find out which collum the first week start and where te last week the same mont ends.
Let say A5:E5 is filled with december in each cell. The row below (A6:E6) says week 48, week 49, week 50, week 51, week 52.
I want a formula telling me de Cell reference where desember begins en where it ends. In my Excample (A5 and E5). If Possible, I also could prefer that the cell reference was to rows below start/end. In my example (A7 and E7)
i'm trying to figure out a way that would return the address of the cell that contains the highest/lowest value of a range i.e. =cell("address",min(g3:g6)).
if the lowest value was in cell g4, i'd want the output from above formula to be $g$4.
view the graph below:
A
B
1
EXTENSION 101
2
INBOUND TALK TIME
55M19S
3
OUTBOUND TALK TIME
1H22M13S
[code].....
I am trying to create a formula that will act like a vlookup but will return a different row. In other words, On page two I need to write a formula that says: In column 1 if you see "Extension 101" return column 2 of the row right beneath it, so on and so forth. So page two should return a mirror of what page one says, the difference is I would like people to type in "Extension 101" in a cell and it would return all the date.
A
B
1
EXTENSION 101
2
INBOUND TALK TIME
55M19S
[code].....
Cell A1 would be typed in//Cell A2-A4 would be static//Cell B2-B4 would return these numbers based on info from A1.
Cell A1 would always be unique in column A (on both pages).
The conversion rate is updated daily from telephony reports, and I manually sort it into conversion order each day before sending it round.
What I want to do is find the highest converter for each team.
So:
Column A ('TeamLeader' range) has the Team leaders in, column B has the agent name ('Agent' range), and column F has the agents conversion rate ('conversion' range).
I think I'm on the right track with this formula:
=(MAX(IF(TeamLeader="Bonnie",Conversion))
But this only displays the figure in the Conversion rate, how to I get it to 'step back' 4 column's and show the agents name?
I tried this:
=VLOOKUP(MAX(IF(TeamLeader="Bonnie",Conversion)),A5:F60,-4,FALSE)
but that returns #NA - is this because I'm asking the VLOOKUP to look 'backwards' 4 columns?