I am trying to automatically select data from a different sheet to fill data in a cell based on two other cells. I've attached a simplified version of what I'm trying to do (with detailed explanations). I hope it has enough info to get my point across.
I posted this in the "programming" forum because I'm pretty sure I will need to use vba in some form or fashion to get this to work. I am more familiar with access than excel, so I may be missing some easier way to make excel do this.
I'm using a command button (p1) within Private Sub P1_Click()
It pulls the activecell as a string (for example $A$1) using a variable called CurrCell, I then want to search this string (currCell) within the worksheet "DATA" and select the cell 3 to the right of it, so that I can change the value.
I have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"
I have a comparison macro that compares one sheet with the next, it is called sub comp1 (). There is a condition whereby columns must be removed before sub comp1 can run. To remove these columns I run the macro called sub colcut (). What I need is the following action:
If cell BJ4 of current worksheet = "RE COMMENT" then run sub colcut () followed by sub comp1 () otherwise only run sub comp1 (). FYI The macro is to be run manually via a button rather than triggered by the value of the cell.
I have a workbook with many tabs and I am writing a macro that works on the active sheet but needs to pick up data from another tab, which is labelled on the active sheet.
As I want to write this macro only once but different tabs have different tabs they look to, VBA code that slects the sheet named in a fixed cell on the active sheet.
This is the code that currently looks up to the tab labelled 'Cork, FA'. However, if this tab name is stored in cell AA2, I would like the code to choose the tab based on the information in AA2?
I have a workbook with 3 worksheets which contains a single spreadsheet where the user enters data and 2 worksheets containing all the named ranges and formulas(divided up by product model) used on the data entry worksheet. What I've been trying to accomplish is to choose one worksheet based on which product model I select on the data sheet.
I'm sure there is simple code for this but I have excel spreadsheets like the sample attached that are consistant in the types of fields but the only data I want to strip out are the rows where column A has a "G" in the cell, I tried using this
but this doesn't work when there is only one row of data. The number of rows with valid data will vary each day. I then tried an if, then statement and a loop but I could never get the loop to stop. I basically want a macro which parses through the worksheet and selects the rows that have that "G" in column A so I can copy them and paste them in another worksheet.
I have a large set of data regarding the activities going on in particular rooms. The data contains activity name, start time, day, duration, room and size.
I would like to select all rows that contain a cell in the activity name column which contain the words 'VideoConference'.
I have tried to Search, Select All then index the remaining data using =iferror(index(etc. However some activities occur in more than one room and all variables apart from 'Room' are the same. Thus when I have tried to index the room column I get the same room for both rows.
ps the raw data set consists of +28000 rows so I can not simply look through and copy.
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
The main worksheet is for buttons to select emergency type and what group should be notified. Subsequent sheets will have different sets of contacts - Col A= Name, Col B = email address, Col C = Yes/No indicator.
The basic code works great as long as the names are on the primary worksheet. When I try to point the code to a different worksheet, the result displayed in the MSGBOX is null. I did this by putting "Worksheets(Sheet2)." in front of "Columns("B")." I double checked the sheet name.
I have a macro that my coworker runs weekly to update info. The macro depends on data in a workbook that comes from another source who arbitrarily decides to rename things. I put into my code a 3 situation scenario.
1. If the sheet name = what it is supposed to then activate it 2. Else If the sheet name contains the word "Pivot" then activate it 3. Else load a userform that lists the worsheets in the workbook and allows the user to select the proper sheet.
The code I have is below. It works until I introduce the 3rd option. Is "Else" not the proper syntax here? Because when I run it, it jumps straight to the "Else" statement and loads the userform even if the sheet is named correctly or contains "Pivot" in its name.
Code: Sub FindPiv() Dim strWSName As String Dim s As Worksheet For Each s In ActiveWorkbook.Sheets
I suspect this is extremely basic however how do I do the following in VBA? I have dataset with a column having a row of numbers as: 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, etc. What I want to do is copy some information designated by the first 1 then the first 2 then the first 3 to another worksheet leaving the other data. How do I selectively choose the first of the 1, 2 and 3 etc.
I have a workbook with 50 worksheets, each worksheet has an Alpha name (ie names of people). Rather than write some code to go through each worksheet to create a report, is it possible to write a formula in a "Reports" worksheet that reads something like
=worksheet10!f2
where worksheet10! is the number of the worksheet (as seen in the VBA project window) while the name is "Billy".
I would like to create a spreadsheet where I enter a list of 30 – 40 names and associated data over 4 separate columns. I would like the option of having a check box next to each name so when checked, it copies that name and associated data in to a section below. This will give me a reduced list of names (lets say 20). From this section I would like the same again to reduce further and once more after that.
know the VBA script to select only specific cells within a worksheet. To be more precise, on sheet 1 - A2, A6 and A10 cells are filled with red color. I want only those cells which are highlighted in red to be selected, copied and pasted to sheet2.
Whenever I try to use Sheets("Volumes").Select or .Activate on a specific worksheet, my macro code will immediately terminate with no error message. Iv'e used F8 to step through several modules and found that this happens every time it hits that line. The wierd thing is that i can select this sheet when screenupdating is off and I select it from a called subroutine. No other worksheets in this workbook are having this problem.
Additional info : using Sheet1.Select will select it with no issues but I don't want to go this route since it's a workaround and not a solution to somthing that should work.This problem occurs in several modulesEverything used to work fine and just one day it decided that i couldn't select the "Volumes" sheet in VBA anymore.I can click on the sheet no problem and it is not protected or hidden.
I currently have a huge data sheet with multiple columns of information. It contains a list of projects organized by columns with information pertaining to each project. I've named this worksheet data.
On another sheet I've named Present, I'm trying to find a way to reference a single project at a time using a drop down list. The Present Sheet has a list of characteristics fields that need to be filled with information from "data" worksheet. I want the characteristics to change whenever I choose another project name from the drop down list.
I have the following code that Ger Plante very kindly helped me with which, depending on whether there is an 'x' by someone's name in a list, creates a new workbook, copies some information to it and saves it before moving on to the next 'x'. Loop Through Rows & Copy Each Row To New Workbook
For lLoop = 2 To 251 'first row of data to last row. If ws1.Cells(lLoop, 4).Value = "x" Then '4 = Column D ws1.Activate ws1.Range("e" & lLoop & ":g" & lLoop).Copy ws1.Range("B1").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=True Rng1.Copy Workbooks.Add ActiveSheet.Range("A1").Select Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:=False, Transpose:=False Selection.PasteSpecial Paste:=xlPasteColumnWidths, Operation:=xlNone, SkipBlanks:=False, Transpose:=False ActiveSheet.Range("A1").Select ActiveSheet.SaveAs varPath & "Student Data Files" & ActiveSheet.Range("B1") & ".xls" ActiveWorkbook.Close
Else End If
Next lLoop
how I can modify the code such that any cells in the range "b1:b504" in Sheet1 of the the new workbook can't be selected or edited without a password....I have tried unsuccessfully using Protect but am not sure how to get vba to set it to specific cells and determine exactly what is allowed in those cells.
I have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First() Dim FindString As String Dim rng As Range 'FindString = InputBox("Enter a Search value") FindString = Worksheets("Template").Range("A26").value If Trim(FindString) <> "" Then With Sheets("Service Level Score Paste Sheet").Range("A:A") Set rng = .find(What:=FindString, _ After:=.Cells(.Cells.Count), _ LookIn:=xlValues, _ LookAt:=xlWhole, _ SearchOrder:=xlByRows, _ SearchDirection:=xlNext, _ MatchCase:=False) rng.Select...........................
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
Sub BrownBH() If Range("Brown!B4:B31") = X Then Range("C4").Value = [#A] Else Range("C4").Value = NT End If End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
find a book with two sheets. One contains data and the other is the report that I must generate. In sheet one ull find the list of all the trucks received.
I would like to see all trucks that I have received in the month of say June in the report sheet as per its arrival date when I change the month on the top of the report.
On sheet 1 in cell A2 I have a date (2/22/07). On sheet 2 I have 4 columns of data...column A has consecutive dates. I am looking for a code that will select the range that begins with the week beginning date of the date that was inputted on sheet 1 and the week ending date. For example, the code will select the range 2/19/07 to 2/25/07 (A20:D26).
I have a workbook containing 25 worksheets. i would like for each worksheet to be named based on what is in cell S6. I might add that S6 has a vlookup in it that pulls in its value..
