Selecting One Cell Copies Range
Aug 15, 2008
Question 1) Is there a way that whenever I select Cell B39 that it will copy cells B39:V39 ? From there I can manually paste that selection to where I need to.
If this is possible, it would save the effort of having to select B39:V39 manually and clicking CTRL-C. I am gathering data and the copying and pasting is killing me.
Question 2) Is it possible that when I click on Cell A9 that it can paste any data that I just copied from another worksheet to cells A9:D29? The size of the selection that I would copy is the same size as A9:D29 (4 columns & 29 rows).
I have searched for a solution, but I am not having much luck since I am anaware of the proper terminology for these types of actions.
View 10 Replies
ADVERTISEMENT
Jul 20, 2012
I have some numbers in the range A1:A10, any macro make 20 copies of these numbers and paste them one after another down column A?
View 1 Replies
View Related
Oct 24, 2008
how (in VBA) to select a range within a column where all values are the same?
For example, given the following:
A B
1 ID Value
2 1 A
3 2 A
4 3 A
5 4 B
6 5 B
7 6 C
How would I select range(B2:B4) where all values = A?
View 14 Replies
View Related
Oct 14, 2008
I need a cell to display the (text) content of 1 of 25 cells. example: I have text content in all cells ranging A1:A25. I want cell B1 to display the content of 1 of these at random. is there a function for this or do I need to use a macro?
View 4 Replies
View Related
Feb 27, 2009
I have rows of data, and the first number corresponds to the number of subsequent numbers that are relevant.
I want to paste that number of values into a second spreadsheet. How do I do this?
e.g.
A1 B1....
6 21 15 14 32 85 14 16 21 25 26 24
In this case I want to copy the 2nd-7th number, as the 6 tels me I want the next 6.
View 9 Replies
View Related
Oct 21, 2009
Is it possible to select only cells of a certain colour, then change these cells to a different colour? example
I want to make the dark grey columns a light green and the red columns a lets say yellow and the text black. Is this possible??
View 9 Replies
View Related
Jul 2, 2014
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
View 5 Replies
View Related
Apr 4, 2014
Not sure why this Code is not copying data across to the second worksheet.
The attached file 140404 Need Range.xlsm is an extract showing only the relevant elements of a much larger structure.
Drivers upload a stock record each day onto the Data Input sheet, listing what products and volumes they have loaded.
Because the range of products varies every day, this has to be set as a "dynamic" range on the worksheet.
To create a printable form, I need to copy each Item ID and Quantity from the Data Input sheet into the "Van Load" spreadsheet.
So Data Input D10 copies to Van Load E6 and the quantities from C10 to G6, down one row, repeat, etc. until the last row of variable Data Input range.
Option Explicit
Sub VANRECORD()
Dim lRow As Range, oCell As Range, nRD As Range, ws As Worksheet
Set lRow = ActiveSheet.Range("B" & Range("B65536").End(xlUp).Row)
[Code] .....
View 2 Replies
View Related
Jul 29, 2013
If Cell "B55" Cell is selected and I want to Select all the above rows to select till Row 1. Selected Row mught change Say B66 or B82 (Dynamic)
Whatever may be the Cell Selected, The result should be The above rows should get seleted. So that I want to delete the rows easily
HTML Code:
ws.Range("B55").Select
Range(ActiveCell, Activecell.Offset(-55,15)).Select
'This cannot work if the selected Cell is 65, So this should be Dynamic till above Range 1)
View 2 Replies
View Related
Nov 12, 2009
I have a data sheet like so:
A B
Name Grade
Jim 82%
Bob 90%
Kelly 71%
June 95%
And I also have two cells which are designated as the low and high range. (ie C1 = 85% and C2 = 100%). I need help with the macro for the button that will copy only the rows to a new sheet that fit within the range. So in the example above, pressing the button will create this in a new sheet:
A B
Name Grade
Bob 90%
June 95%
View 2 Replies
View Related
Jun 2, 2009
I have a list of references in a range (A5:A98) in a worksheet called "Architectural". What I am trying to do is create a seperate worksheet based on each cell value in the range. However, rather than blank worksheets, I would like each new worksheet to be a copy of a worksheet called "Template". If possible, I would like to have the name of each worksheet also put into cell B2 of each copy.
View 2 Replies
View Related
Sep 14, 2008
I've found afew examples off google searches, but my attempts to edit them arent working...
i want a macro to copy a range, say a1:e5, and paste the values and fonts/boarders/etc (ie no formulas) into a new workbook
the ones i found copy a whole sheet, i just want a portion....
View 9 Replies
View Related
Dec 5, 2007
I want to copy a range of cells and paste them in two different locations and have the new cells relate in data using a command button. This button would be clicked an infinite amount of times to provide the amount of copies desired and to be pasted underneath the previous copy. Example:.............
View 3 Replies
View Related
Oct 31, 2006
I would like to select a range of cells relative to the current cell and move them to the right two cells. Basically, if I were in cell A1 I want to be able to have a macro select A1 - A8 and move them over by two cells leaving A1 and A2 blank.
Excel 2003
View 9 Replies
View Related
Nov 6, 2009
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
View 9 Replies
View Related
Dec 11, 2008
Automating the Number of copies to print based on a range. ihave the following
View 3 Replies
View Related
Feb 19, 2010
I need to accomplish selecting a range using variables for the starting cell and ending cell rows and columns.
Pseudo code (how I'd like the syntax to be, but isn't):
Worksheets(mysheet).range(startCellRow, startCellCol : endCellRow,endCellCol).Select
With Selection
...
End With
View 6 Replies
View Related
Apr 29, 2014
I have a macro that copies rows from my DAILY OCCURENCE sheet that have a YES in them to my MANAGER SUMMARY SHEET and G1 is selected which has a hyperlink that opens a new email with the manager's email address and Subject pre-assigned.
I then have to manually go back to the newly generated summary sheet and select the cells and paste them into the email that was just opened.
Is there a way that the generated rows are already copied in memory and all i have to do is CTRL+V into the new email, or even better, the cells are pasted in the email automatically? So basically either the information being copied over stays in memory, or after it is copied into the summary sheet it is copied again. I just dont know how to copy unpredictable ranges generated by macros.
The code that generates my summary sheet for my manager is below.
[Code] ...........
View 4 Replies
View Related
Jul 4, 2014
I am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
View 9 Replies
View Related
Jan 23, 2014
I have 5 opened files. I have copied into those files a set of formulas from my master sheet (with the macro). In A3 of ALL the open files, there is a date (ex. Date: 1/4/2014) Based on that date I want to copy the result of what I copied into the files (below is the code that I used to copy into the open files, maybe I could add something to create a named range of the resulting paste) back into the master sheet into a tab called 2014 and into a cell two cells below the cell in row 12 with the MATCHING date.
View 14 Replies
View Related
Jul 9, 2013
I have an email sent via pdf and the only way to get this into excel is by copying and pasting and it all shows up in one cell.
Not much to focus on other than reading from left to right, once you see a numeric value, this should be in another cell and once you see "LS or WS or NR or COA, this will begin another cell. I had to add the dots to show where the new cell starts.
parsed data
SHELL TBN...130 CURACAO/JAPAN 18JUL... LS 3.675M PDVSA SUBS
EVERGLADES...70 CHIRIQUI GRANDE/USG14JUL... NR BP
TEXAS STAR...70 ECMEXICO/USG 11JUL... NR NR
MINERVA LIBRA...70 BAHAMAS/USG 11JUL... WS 80 STATOIL RPTD
original data
SHELL TBN 130 CURACAO/JAPAN 18JUL LS 3.675M PDVSA SUBS
EVERGLADES 70 CHIRIQUI GRANDE/USG14JUL NR BP
TEXAS STAR 70 ECMEXICO/USG 11JUL NR NR
MINERVA LIBRA 70 BAHAMAS/USG 11JUL WS 80 STATOIL RPTD
CPO ENGLAND 35 ECCANADA/OPTS 07JUL NR CREST ENERGY FLD
View 4 Replies
View Related
Mar 27, 2014
I have a table that lists names, eligibility and # of people. That is just one worksheet. I have a total of 30 worksheets in that workbook. The column with the names is completely filled out. I entered a number in the eligibility and # of people columns and Excel copied all three cells (name, eligibility and # of people) to the same cells on all of the worksheets. I have no formula in any of the cells, nor do I have anything linked.
Example:
1st worksheet - e19 - John Doe, f19 - Yes, g19 - 4
That information is then put on all of the other worksheets in those same cells, even though the worksheets are not linked in any way.
View 1 Replies
View Related
Sep 14, 2008
I have created a macro that copies information from various cell on one sheet to another. When I run the macro the screen flickers about 5 times. Is there a way to stop.
View 5 Replies
View Related
Jun 8, 2014
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm
View 2 Replies
View Related
Oct 2, 2008
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies
View Related
Apr 28, 2006
I am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are:
completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls
cashsheetname Formatted Sheet
cashcurrcolumn A
cashfirstrow 2
cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _
Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value
Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _
Range((PELCurrColumn & PELlastrow)).Value
View 8 Replies
View Related
Apr 22, 2009
I have a macro that selects and copies and pastes a range of data from one sheet to another sheet. It works perfectly except it is pasting all the cell formatting and formulas and i only want or need the values.
View 8 Replies
View Related
Apr 21, 2014
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies
View Related
Sep 26, 2007
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
View 9 Replies
View Related
Jul 11, 2014
So in my code I have two set ranges and want to select from one set range to another. The code I have now does not work because I cannot select Range("POBRF:PO"). This is the code.
[CODE]
ARow = Range("A" & Rows.Count).End(xlUp).Row
Set POBRF = Range("A1:A" & ARow)
BRow = Range("I" & Rows.Count).End(xlUp).Row
Set PO = Range("I1:I" & BRow)
Range("POBRF:PO").Select
[CODE/]
View 1 Replies
View Related
