I run a macro on a spreadheet in which the rows increase daily. In the macro I simply recorded an end.down to select a column of data which ends up being fixed row numbers in the code so the next time I run the macro it only selects the range I selected last time.
View 1 Replies
I am trying to select rows in excel using a macro and then hide the rows, but i want to be able to add rows within this selection and still be able to hide the complete selection of rows.
The macro i am currently using is shown below: This hides rows 131 - 205, but if i was to add in another row in between so the range i now want to hide is 131-206 can i get the macro to update to this new range?
[Code] ......
having trouble editing the code to allow for dynamic ranges. I have tried to research online, but am having a hard time with it. I think I would understand better if I could see a practical example.
Here is the sample macro I recorded in Excel that I am working with:
Sub Macro1()
'
' Macro1 Macro
'
'
Cells.Select
ActiveSheet.Range("$A$1:$C$87").RemoveDuplicates Columns:=Array(1, 2, 3), _
Header:=xlNo
End Sub
How can I edit this to allow for dynamic rows and columns?
I am looking for a macro that will allow me to create a dynamic range based on the settings I give it. I would like the dynamic range to be called tracking_number and it to have a reference to =Offset(MainReport!$A$2,0,0,COUNTA(MainReport!$A:$A),1)
If this is possible I would really appreciate it. The reason I need this is because I have 2 workbooks. They are the one with the MainReport in it and then the Master workbook. Every day the workbook containing the MainReport is overwritten with more data, so I can not store a dynamic range and reference it each day.
I did the huge macro that names a bunch of dynamic ranges, all similar to the following: Range("=OFFSET(BD!$C$32,0,1,1,COUNT(BD!$32:$32))").Name = "ChtBDLabel"
I tested it as I went along, so I know it was working. Then I worked on several other tasks (copying the range to another location on the sheet, making graphs from the ranges). Now when I go back to run this again, I get: Run-time error '1004':
method 'Range' of object '_Global' failed. I went and looked what I thought were my named ranges, and they were wrong (not dynamic, just a cell reference). I deleted them and tried again with same error.
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View RelatedI've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
definitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI have a macro that has automated 95% of a task but one thing is still evading me! If I use the keys then this is what I do:
Select cell C192
Select Shift and R-Arrow so that C192 and D192 are selected
Select Ctrl, Shift and Up Arrow so that C1:D192 are selected
Select Shift and Down Arrow so that C2:D192 are selected
I have two named ranges, LV1 and LV2 and wish to select them for printing. If the ranges were fixed I would use - Range("A2:H4,A8:H10").Select - how do I do the equivalent using the named ranges in vba?
View 2 Replies View RelatedI am writing a UDF to find the average of two ranges, which start at the StartDate and then go back a certain number of days, that are on another sheet. When I use Union to try and unite my two ranges the resulting range just equals the first range.
VB:
Public Function ModifiedAverage(StartDate As Variant, SheetTenor As String, History As Double)
Dim DateRow, NbCols As Double
DateRow = Application.WorksheetFunction.Match(StartDate, Sheets(SheetTenor).Range("A:A"), 0)
NbCols = Application.WorksheetFunction.CountA(Sheets(SheetTenor).Range("6:6"))
[Code] ....
I have four ranges of data in a worksheet that are sorted in order by the value in the final columns. Based on this value I would like to flag the highest five values from all ranges by adding a value in the adjacent cell. Is there a formula/function that I can use to identify the highest values from a number of data ranges?
View 9 Replies View Relateddoes anyone have any suggestions for selecting (highlighting) all the named ranges on a sheet?
View 9 Replies View RelatedI'm trying to get multiple seperate ranges selected but Excel interprets it as criteria even when I use Insert> Function. The problem probably comes from the use of commas in formulae. Example:
I want A1:E1 and A3:E3 and A5:E5 to be the range involved which leads me to construct:
= COUNTIF(A1:E1,A3:E3,A5:E5...
However, Excel interprets the 2nd and 3rd values after the commas to be criteria or something else.
I have a macro in which I have a string variable named RangeName. I use this variable to select a range of data to copy into an powerpoint slide. However I cant select multiple ranges of data to copy. For eg. when I type:
View 11 Replies View RelatedI have a list of data that displays data by day, I want to select only the data for the for the current month and then the same day time frame for previous months in the data set.
E.g.
Today's date 08/07
Full days into month 7
Formula to sum data in columns B that only looks at dates 01/07-07/7
I will the adjust that formula for a January date that only pulls data for 01/01-01/07
Then repeat for Feb-June
Selecting the range from Multiple Column data.
Currently, it is:
[Code]....
I have data from columns A:E
I've got a software test plan that has test cases w/ individual pull-downs to select result states (All individually color-coded thanks to a macro). If any state is selected other than "Pass" or "Untested", a text entry feild appears two rows beneath the test case for additional notes and information regarding what behavior occurred when the test was done.
I need a way to a.) Automatically select this text field once any state other than "Pass" or "Untested" is selected in the pull-down, and b.) Require text entry in the field before the user can proceed to the next test case. (ideally w/ accompanying custom error message describing what information is required.)
I've pasted my macro code below: ...
I am using Excel 2007 and the following code is generating an error 1004 (Method 'Range' of object '_Worksheet' failed) on the .Range select line. I am trying to select a bunch of noncontiguous ranges and then format them all at one time.
Code:
With Sheet1
.Range("B9:G9,B10:D11,E10:E11,F10:G11,A13:G13,A14:D20,E14:E20,F14:G20,A22:H22,A23:D24,E23:F24,
G23:H24,A26:H26,A27:D28,E27:F28,G27:H28,B30:G30,B31:C32,D31:E32,F31:G32,B34:G34,B35:B36,E35:E36,C35:D36,F35:
G36,B38,B39:C40,D39:D40,E39:F40,B42:G42,B43:D50,E43:E50,F43:G50,A52:G52,A53:C54,D53:D54,E53:G54,
G61:G62,H65:H66,A56:H56,A57:H60,A61:F62,A64:H64,A65:G66").Select
With Selection.Interior
.Pattern = xlNone
.TintAndShade = 0
.PatternTintAndShade = 0
End With
End With
I've written longer lines of code, so I don't think it's a line length issue. Is there a limit to the number of ranges or cells that Excel can select at one time?
I want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
I have a particular issue - i am trying to create a rolling correlation.
lets say you have two variables for 3 different months:
Month1 a x
Month2 b y
Month3 c z
correlation will correlate a-c with t-v
however, come next month - i have to manually drag the ranges for a rolling three month correlation:
Month1 a t
Month2 b u
Month3 c v
Month4 d w
correlation will now correlate b-d with u-w for a the last three months.
I want to automate this as I know what the month is, I can't seem to return the last three months and correlate the data.
I have tried to do this with the database functions, but I think that they break the array relationship of b-d and u-w in the correlation function.
In the example I have attached, I need 4 named, dynamic ranges to build a chart with:
1) Dates for the chart
always starting from A2 ... to whenever the LAST sum of B, C, D =0
(right now that would be A2:A30)
2) The Amounts
I need the amounts as 3 individual dynamic ranges, with no 0 values
(example - B2:B21, or c10:c14, etc)
3)The date column
same as #2, but just a single cell reference to show as a marker on the chart.
(example e21:e21)
I know someone here will think 'so what's the big deal' and pop it out in 30 seconds.
I'm trying to make ranges in a SumProduct formula dynamic, but getting errors #N/A. I think this is because the top two rows are headers, throwing off the range count.
Q. How do I adjust the range definition to compensate., e.g.
Range =Offset(Sheet1!$D$3,0,0,COUNT(Sheet1!$D:$D),1) where column D is numeric, and
Range = Offset(Sheet1!$T$3,0,0,Match("*",Sheet1!$T:$T,-1),1) where column T is text?
I had assumed that the offset value 3 would do this, but I suspect the functions count and match are not doing so.
I am trying to create a vlookup to get a count of trouble tickets techs completed daily within a table I created, I am using a table since its dynamic. For example I need to see how many tickets Joe completed in a day. See below...
Tech Ticket# Comments Status
Joe 1234 Replaced HD Closed
John 3212 Replace Motherboard Closed
Joe 5678 Installed OS Closed
Above is just an example (my table has 40 columns). I need to vlookup joe and get the count of the closed tickets.
So I was looking for reassurance or validation more than anything. From what I can tell you can in order to build a chart that is dynamic throughout a range, you use the offset and count or counta function - 1. That part isn't a problem. My question is once you created that for your charts do you just normally plot your chart range or do you have to reference the named range directly into the chart range?
View 2 Replies View RelatedI have monthly sales, and i wanna be able to sum the last-twelve month sales, when i select the month from a drop-down list. For example, when i select Feb14 from the drop-down, I want the formula to sum the sales between mar13-feb14. how can i accomplish that?
Select Month
Feb14
LTM Sales
?
[Code] ..........
Dynamic named ranges - lots of them! ...
View 9 Replies View RelatedI have a stock chart that I want to update dynamically if the data record length changes. From the source data menu, I tried to use the following data ranges:
=OFFSET(Candles!$AB$8,1,0,COUNTA($AB:$AB)) ---> Date, x values
=OFFSET(Candles!$AD$8,1,0,COUNTA($AD:$AD)) ---> High
=OFFSET(Candles!$AE$8,1,0,COUNTA($AE:$AE)) ---> Low
=OFFSET(Candles!$AF$8,1,0,COUNTA($AF:$AF)) ---> Close
When I place any of these in the data range box under 'x axis labels or values', I receive the message "This function is not valid".
The MS webpage at http://office.microsoft.com/en-us/ex...098011033.aspx describes using these formulas but they don't appear to work.
I am creating a consolidation worksheet. It contains a macro that automatically copy data from other sources and paste it into my DB sheet. It already works, but I want to improve it. The source worksheet databases has been defined with the name “SOURCE”. Is there any way that I can make my macro look for this dynamic ranges directly, copy and paste it into my DB sheet. I am attaching an example of what my current macro is doing.
View 2 Replies View Related
