I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e. First dynamic range: called "Milestones" at A11 Second dynamic range: called "Activities" at A25 & make a Validation list that will list content of both
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
I want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
I am trying to create a vlookup to get a count of trouble tickets techs completed daily within a table I created, I am using a table since its dynamic. For example I need to see how many tickets Joe completed in a day. See below...
Tech Ticket# Comments Status Joe 1234 Replaced HD Closed John 3212 Replace Motherboard Closed Joe 5678 Installed OS Closed
Above is just an example (my table has 40 columns). I need to vlookup joe and get the count of the closed tickets.
So I was looking for reassurance or validation more than anything. From what I can tell you can in order to build a chart that is dynamic throughout a range, you use the offset and count or counta function - 1. That part isn't a problem. My question is once you created that for your charts do you just normally plot your chart range or do you have to reference the named range directly into the chart range?
I have monthly sales, and i wanna be able to sum the last-twelve month sales, when i select the month from a drop-down list. For example, when i select Feb14 from the drop-down, I want the formula to sum the sales between mar13-feb14. how can i accomplish that?
I have a stock chart that I want to update dynamically if the data record length changes. From the source data menu, I tried to use the following data ranges:
=OFFSET(Candles!$AB$8,1,0,COUNTA($AB:$AB)) ---> Date, x values =OFFSET(Candles!$AD$8,1,0,COUNTA($AD:$AD)) ---> High =OFFSET(Candles!$AE$8,1,0,COUNTA($AE:$AE)) ---> Low =OFFSET(Candles!$AF$8,1,0,COUNTA($AF:$AF)) ---> Close
When I place any of these in the data range box under 'x axis labels or values', I receive the message "This function is not valid".
The MS webpage at http://office.microsoft.com/en-us/ex...098011033.aspx describes using these formulas but they don't appear to work.
I am creating a consolidation worksheet. It contains a macro that automatically copy data from other sources and paste it into my DB sheet. It already works, but I want to improve it. The source worksheet databases has been defined with the name “SOURCE”. Is there any way that I can make my macro look for this dynamic ranges directly, copy and paste it into my DB sheet. I am attaching an example of what my current macro is doing.
I've got a spreadsheet that I download a list of information into. The information relates to activities that are taking place e.g. start time, end time, type of activity (e.g. meeting) and duration (which identifies the length of the activity in 30 min slots e.g. 9.30am - 11.30am = 4).
The rest of the columns are labelled to represent the time in 30 min slots starting from 9am. What I would like excel to be able to do is to identify the first cell in the range which would be the cell that represents the start time in the row. Then from this cell fill cells in the row up to the end time with something - it doesn't matter what as long as the cell can be differentiated from the other blank cells in the row.
I don't think that I've explained myself that well so I've attached the spreadsheet for you to look at.
I'm having a fit with this formula; maybe the gurus will show me what I'm doing wrong. I have a list of area numbers along with dollar amounts that go with these area numbers. I have created a named range named "Areas" and another one named "MO_PD".
At the bottom of the worksheet I am doing a recap that takes the area number and sums all the entries in the MO PD column. This approach has been done before with Thomach's help. I'm trying to mimic it, but it's not working for me.
NOTE - I know that I can get around this using a pivot table, but I would like to use this approach for now. I would at least like to know what I'm doing wrong. Also, I'm not totally sure if I did the dynamic named ranges correctly so that may need to be fixed.
I've been working a macro that seems pretty simple, but has been giving me loads of trouble. I have about 20 worksheets in a Workbook, which all have a similar template (i.e. the data I'm interested in starts on row 14), but have different amounts (rows) of data in them. I want a macro that sorts all the data in ascending/descending order according to column Q. The problem that I am running into is not that the macro only works for the sheet that is active when I run the macro as opposed to every single sheet in the workbook ....
I have just upgaded to Excel 2007 and previously used a Dynamic Range Wizard addin in Excel 2003 but it does not work in 2007. I think it originally come from Robert Bruce but can not find it on the web to get an update.
I have a question regarding dynamic validation. I have attached a sample spreadsheet to clarify if my explanation doesn't. I have a list of codes that map to a list of other codes that are not one to one mapping. I would like for the other users of this code to populate what the correct code on our side is but without having to go thru the entire list in a validation field. (if that makes since)
Using validation before in a similar instance i used indirect to grab a named range to help shorten the list for them. However in this case that would be a ton of ranges i would have to set up! I've tried Match, countif and index in an offset formula in the validation list but can never get it to work!
I run a macro on a spreadheet in which the rows increase daily. In the macro I simply recorded an end.down to select a column of data which ends up being fixed row numbers in the code so the next time I run the macro it only selects the range I selected last time.
The range element below needs to be dynamic. A1 and down meaning if i was to do this out of VBA I would hold CTRL+SHIFT+DOWN but i cant do that from macro record as it doesn't work, I'm guessing this Range("A1:A73") is the element I need to change but I don't know what to?
I am looking for a non volatile alternative to using OFFSET in my named ranges as my models are generally quite bulky and it is beginning to make me quite angry having to build these models in calc manual.
Can anybody provide a non-volatile alternative to this?
I have a spreadsheet with a large number of graphs on and lots of data.
Most the graphs look across 20 or so columns and one or 2 rows down.
The problem is that l need to insert new colums in now, and obviously excel graphs dont recognise the inserted column data.
Therefore l believe using named ranges may solve this problem...
I have the formula =OFFSET(Sheet1!$A$1,0,0,2,MATCH("DC",Sheet1!$1:$1))
However i need to expand on this to achieve what i need to do.
1. Firstly l only want to look from column C onwards (so ignoring all data in column A and B)
2. I need the match to match to columns starting with the letters "DC", however there is a number after this, so it is not a direct match. The match needs to ignore columns with any other heading start.
3. is there anyway to automatically refresh the graphs to the named range once it changes, or any simble vb macro i can run?
I created a chart in Excel 2003 which relies on dynamic named ranges. For years this chart has been working beautifully. I recently converted to Excel 2007 and the chart no longer understands the dynamic named range for the x-axis. It understands the y-axis dynamic named ranges just fine. I have tried renaming the x-axis range to various names (none of which contain the word chart). I also experimented by just using a static range name. And I have tried recreating the chart from scratch with the same results. It lets me create the chart initially but then when I refresh the worksheet, the x-axis is blanked out.