I am trying to select rows in excel using a macro and then hide the rows, but i want to be able to add rows within this selection and still be able to hide the complete selection of rows.
The macro i am currently using is shown below: This hides rows 131 - 205, but if i was to add in another row in between so the range i now want to hide is 131-206 can i get the macro to update to this new range?
[Code] ......
I run a macro on a spreadheet in which the rows increase daily. In the macro I simply recorded an end.down to select a column of data which ends up being fixed row numbers in the code so the next time I run the macro it only selects the range I selected last time.
View 1 Replies View RelatedSelecting the range from Multiple Column data.
Currently, it is:
[Code]....
I have data from columns A:E
I want to select a range of rows 11, 14 and 23 to 24 in column j, plus the 2 rows to the right of column J and run a sum formula on the range. My procedure is selecting rows 11/14/23/24 and doing the sum for only column J. How do I make it so it runs the sum formula on all 3 columns. My code is copied below. I am fairly new to VBA.
Code:
With ActiveSheet.Range(Cells(27, j), Cells(27, j)).Select
Set sumRng = Intersect(Range("15:21, 25:25"), Columns(j)).Offset(0, 2)
ActiveCell.Value = WorksheetFunction.Sum(sumRng)
End With
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
I need to accomplish selecting a range using variables for the starting cell and ending cell rows and columns.
Pseudo code (how I'd like the syntax to be, but isn't):
Worksheets(mysheet).range(startCellRow, startCellCol : endCellRow,endCellCol).Select
With Selection
...
End With
I am working on a VBA macro, using the following
With wsSheet.Range("A:A")
ReDim MyArray(1 To .Rows.Count, 1 To .Columns.Count)
MyArray = wsSheet.Range("A:A")
For i= 1 To .Rows.Count
For j= 1 To .Columns.Count
wsSheet.Cells(i, j+ .Offset(0, 3).Column) = MyArray(i, j)
Next: Next
I want to select alla values in column A, but when I specify the range as "A:A" the code results in an infinite loop! How can I come around this?
I have created the below macro to show the user (when he / she clicks on a button) how many days are left till the deadline day (taken from MS Project).
Sub DaysLeft()
Dim rng As Range
Dim count As Integer
Set rng = Sheets("Programme Reporting").[E2:E200]
count = Application.Evaluate("NETWORKDAYS(Today(),E3)")
Range("L3:L200").Select
ActiveCell.Value = count
End Sub
The range I want to output the days to is L3:L200 that seems to be okay. I have an issue with trying and putting a range in the NETWORKDAYS area, if I try and put in E3:E200 (the range of dates) it fails, as does $E$3:$E$200. At the moment the above code does work but it only puts in the days for one of the entries (E3).
i want to write a macro which searches for data in a xl sheet.It should then format that data in a particular format.The data can be present in multiple places.For eg. formating a 5*6 matrix which starts from d4 cell and a 4*7 matrix which starts from e15 cell(please note that d4 and e15 location are not fixed).
View 9 Replies View Relatedcreate a Dynamic Named Range for Pivot Tables
the pivote table takes data from A1 to Kx
x is the last row of column K that is not 'blank' ( whenever I insert a new row),
I already know how to define a zone but not know how to to make it "dynamic"
I'm trying to hide all rows from row 3 to a variable row. I've struggled to simply select the rows that I want to hide. I have managed to select a range (containing the rows that I want to hide). I now need to select the rows contained in the range currently selected and then hide them. My code is as follows:
Sheets("Program").Activate
Activesheet.Range("B3").Select
Sheets("Program").Range("B3", ActiveCell.Offset(LastProgramRow - 10, 0)).Select
Selection.Row.EntireRow.Hidden = True
The last line of code fails. I have tried modifying it to variations of:
Sheets("Program").Row (3), ActiveCell.Offset(LastProgramRow - 10).Select
but this also fails. How can I change this code so that only the row is selected and not a column?
I am still trying to develop a macro that will copy and paste a set of formulas into a dynamic destination range. I have included a worksheet that shows what I am trying to do. Basically when using AutoFill I need the columns of the destination range to be dynamic based on the number of rows in another sheet.
View 13 Replies View RelatedIm working on a macro that i need to delete any row that contains 0 or blank in a dynamic range that starts at H23.
View 1 Replies View Relatedi have data that will vary from item to item in the $ of rows associated
and the # of columns to be dealt with.
item1 Line 1
Line 2
Here i want to have a formula put and copied across X columns
item2 Line 1
Line 2 other data going across in the columns
Line 3
Line 4
Here i want to have a formula put and copied across X columns
item3 Line 1
item4 Line 1
get my meaning??
columns involved will be known before i get to this bit of code !!
as an example lets say it's 8 columns
using the record macro i get this bit of code
Range("E14:M14").Select
Selection.FormulaR1C1 = "=SUM(R[-10]C:R[-1]C)"
This is fine but i don't know what row or the columns are before i run the macro so the Range
("e14:M14").select wont really work.
I've sent sometime going through MRexcell searching for tips but found nothing also googled for dynamically pasting across unknown columns
this is close to my idea in my mind conceptually
Range("C2:C" & LastRow)
but it doesn't make the columns dynamic eg column 8 being = H and then P = 8th column on and the last with data.
I currently have this beast of a code running in Excel 2013:
HTML Code:
Sub OBTAIN_RAW_DATA_MACRO()
Dim NextCol As Long
'Copy data
Workbooks.Open Filename:= _
[Code] ........
However the issue lies in that once the data is refreshed, the slicers reading off the above raw data/pivots, automatically select all weeks, however this is not beneficial for the data being presented.
Is there anyway to have, once the Pivots have been updated, for the macro to then check and select current week range (beginning Monday) only?
How would I select a dynamic range in VBA without using name a range in Excel. I have searched for possible answers, however they use xldown, or xlup which works great for non-empty cells. My problem need to select the area where there are empty cells. Here is a snap shot of the data looks like:
Trade Date A B C D E
2008-Feb-11 450,432
2008-Feb-13
2008-Feb-15
The cell with number is where I got the formulas. Now i wish to fill that formula with the rest of the area. However, the problem is the number of rows and number of columns may change in the future. So I need to select those empty areas in a dynamic way.
I am trying wihout suceess to create a range to copy in a macro each time the macro loops. This is thus a dynamic range. My failed attempt is listed below. How is this done?
ColumnAdjust=2
For I = 1 To 282
Range ("B5").Select
Range(ActiveCellOffset(0,ColumnAdjust),ActiveCellOffset (0,ColumnAdjust+1))
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
.
.
.
ColumnAdjust= ColumnAdjust=2
Next I
I am attempting to create a dynamic range within a macro.
Each week, a list of performance factors is recorded for employees. The macro is about to do an Advanced Filter to create reports based on user-provided criteria. Since there is new data every week, the range used for the Advanced Filter is dynamic. The code for the Advanced Filter refers to a range entitled “Database.” My problem is in defining “Database.”
It is currently 534 rows and 8 columns, starting at A1.
The relevant portion of the macro currently reads:
Sub Check1()
ActiveWorkbook.Names.Add Name:="Database", RefersToR1C1:= _
"=OFFSET('Loan Officer History'!$A$1,0,0, COUNTA('Loan Officer History'!$A:$A),8)"
Range(Database).AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"J1:Q2"), CopyToRange:=Range("J5:Q5"), Unique:=False
End Sub
When running the macro, the debugger stops at the line which starts "ActiveWorkbook.Names" and tells me “Run-time error ‘1004’. The formula you typed contains an error.”
I have a Ranking tab that has the persons name, weeks, months that subtotal into 2 columns, MTD and YTD. I have set up with 2 Macros to sort based on two columns based on their selection of MTD or YTD.
What I did not take into consideration is if a person was added at the bottom of the list.
Is there a way to modify this to include rows that may be added?
VB:
[SIZE=4]CODE HERE[/SIZE]
VB:
[B]Macro1
[/B]Sub SortYTD()
[Code].....
I recorded this macro based on a column with a drop down window in which data has been filtered .....
View 12 Replies View RelatedI need a bit of assistance in identifying the dynamic range so that my macro below will work:
View 3 Replies View RelatedI am still having some difficulty in getting a macro to select a print range on a text file imported into excel. All the data pulls into column A which is OK. I'm trying to get my macro to highlight & select the print range by going Home, End Down, Tab right Tab right and then select whatever that highlighted range is. This range will change from file to file.
My macro reads as follows:
Sub PrintToView()
'
' PrintToView Macro
' Macro recorded 5/5/2004 by
'
'
Range("A1").Select
[code]....
I am looking to run a marco for a selection range, and the selection range could vary in size.
Using the Macro recorded (whilst turning on the relative reference) the Macro runs for a defined number of cells. I would like to run certain Macro, for different ranges of cells.
I am not sure if my problem is in the dynamic range or not. I have attached a small sample file. I tried to create a dynamic range by creating a named range of my "LabelRow" with the following as the refers to: =OFFSET($C$32,0,1,0, COUNTA($32:$32))
When I set my cursor on this, Excel makes an outline on the whole row 32 where there is data, which gives me some clue that it understands what I am trying to define. Next, I try to pick this range up and paste it using named ranges in a macro (CopyRange). It gives me an error like it doesn't understand the named range. I do similar macro code in many other places in this project and it works with non-dynamic ranges. Here are some other details on this project. I need a dynamic range because I insert new data into the dataset, which may be 2 quarters up to 20 quarters. This insert causes a regular range to be messed up. My ultimate goal is to graph selected rows of data with the same labels, but I need to have it starting at Q1, which is pushed to the right as new rows are added.
I have been tring to define a dynamice range in VBA. At the moment, I use following method to Define the range,
Sub OTC_Future_Total()
Dim DynamicRange As Range
Worksheets("FinalReport").Select
Range("e9").Select
Set DynamicRange = Range(Selection, Selection.End(xlDown))
DynamicRange.Select...
I need to find average of the values , the count of the cells will be dynamic (may be 5 or even 200).
View 2 Replies View RelatedI've got a software test plan that has test cases w/ individual pull-downs to select result states (All individually color-coded thanks to a macro). If any state is selected other than "Pass" or "Untested", a text entry feild appears two rows beneath the test case for additional notes and information regarding what behavior occurred when the test was done.
I need a way to a.) Automatically select this text field once any state other than "Pass" or "Untested" is selected in the pull-down, and b.) Require text entry in the field before the user can proceed to the next test case. (ideally w/ accompanying custom error message describing what information is required.)
I've pasted my macro code below: ...
Ultimate goal is to automatically update the source data for 4 pivot tables that are on 1 worksheet. The data for those 4 pivot tables are on 4 different worksheets w/in the same workbook. Consolidating into one dataset is not an option.
I'm familiar with a dynamic named range, but the 4 worksheets that contain the data are replaced daily via automated Access output which creates an error.
I know how to do this adhoc by matching the pivot table names with their respective worksheets, but there are many other documents with similar layouts where this would beneficial.
Below is an example of how I currently update 3 pivots on separate worksheets w/ the same data range which is w/in the same workbook. My proposed changes are below the current. Any ideas on how to return the workbook name as a string...Or am I going about this the completely wrong way...
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View Related