I have monthly sales, and i wanna be able to sum the last-twelve month sales, when i select the month from a drop-down list. For example, when i select Feb14 from the drop-down, I want the formula to sum the sales between mar13-feb14. how can i accomplish that?
Select Month
Feb14
LTM Sales
?
[Code] ..........
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View RelatedI'm on Vista with Excel 2007, HOWEVER, the solution must be Excel 97-2003 compatible.
I have two columns. One will a Y or N in it, the other will have a number. I need to sum the column with numbers, but I ONLY want the numbers added that have a 'Y' in the same row of the other column ...
I have 12 sheets named 1 to 12 (and ordered like that). I want to create a dynamic SUM formula, where I calculate a sum from 1 to x based on the value in A1.
So let's say I want to sum sheets 1 to 5. A static formula approach would be:
=SUM('1:5'!B5)
So what I'm trying to achieve is something like
=SUM("'1:" & $A$1 & "'!B5")
but I can't get it to work with INDIRECT.
This works (amount from one sheet only)
=SUM(INDIRECT("'1'!B5"))
But this does not work:
=SUM(INDIRECT("'1:5'!B5"))
I need to sum a value that falls between 2 date ranges. I have read a few posts on this subject and thought I had it working, but I realized I was getting values in fields I should not be.
=SUMPRODUCT((Details!H2:H100>=$E$4)*(Details!H2:H100
I have a cell that I need to make a calculation if certain other cells =Y, or to show "0" if the other cells =N. I can do the calculation for the Y part but how do I add the N part of it? Here is what I have:
=SUMIF(J19:J40,"Y",H19:H40)*0.08
Need formula which can sum Amounts from varying Weekly time periods and the result be recorded in the appropriate month? I've attached a simple example of the way the output needs to look and a sample data table below.
View 3 Replies View RelatedI am working on this report for data from 2007 to 2011 for multiple customers. I have two columns of data for each customer for each year. My ultimate goal is to get a total for both columns of data and insert it in the row right under the row containing the last year of data. Below is a sample of what my data looks like and what I want it to look like. Here is the data:
2007113565200812642520091125452010136215200722519620082342352009212584201023656220
11225648200734323420083135572009315315201031826720074256852008442953200
7518816200853224520095314912010524676201153891320106518462011
62412520077155452008717696200973247520107521212011719343
I want it to look like this:
2007113565200812642520091125452010136215Total886150200722519620082342352009212584201023656220
11225648Total13393252007343234200831355720093153152010318267
Total90217320074256852008442953Total68513820075188162008532245200953149120105246762011538913
Total145924120106518462011624125Total7597120077155452008717696200973247520107521212011719343Total1369280
The only part of the coding I am having problems with is the sum function for the different lengths of data. Below is the code that I have so far.
Code:
Sub Report()
Dim i As Integer
i = 3
[Code]....
summing monthly values based on different date ranges. For example if I have multiple contracts with different start and end dates and based on those date ranges, I want to sum the respective monthly production totals, how would I do that in a formula. I started to set up the table to include "start date month" and "# of months in contract". Is there a way to sum based on the start month and # of months in contract.
For example if hte contract started in Jan08 and ends in May08, the calculation would start with month "1" and sum over 4 months.
Here is an example: ....
definitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
I have a particular issue - i am trying to create a rolling correlation.
lets say you have two variables for 3 different months:
Month1 a x
Month2 b y
Month3 c z
correlation will correlate a-c with t-v
however, come next month - i have to manually drag the ranges for a rolling three month correlation:
Month1 a t
Month2 b u
Month3 c v
Month4 d w
correlation will now correlate b-d with u-w for a the last three months.
I want to automate this as I know what the month is, I can't seem to return the last three months and correlate the data.
I have tried to do this with the database functions, but I think that they break the array relationship of b-d and u-w in the correlation function.
In the example I have attached, I need 4 named, dynamic ranges to build a chart with:
1) Dates for the chart
always starting from A2 ... to whenever the LAST sum of B, C, D =0
(right now that would be A2:A30)
2) The Amounts
I need the amounts as 3 individual dynamic ranges, with no 0 values
(example - B2:B21, or c10:c14, etc)
3)The date column
same as #2, but just a single cell reference to show as a marker on the chart.
(example e21:e21)
I know someone here will think 'so what's the big deal' and pop it out in 30 seconds.
I'm trying to make ranges in a SumProduct formula dynamic, but getting errors #N/A. I think this is because the top two rows are headers, throwing off the range count.
Q. How do I adjust the range definition to compensate., e.g.
Range =Offset(Sheet1!$D$3,0,0,COUNT(Sheet1!$D:$D),1) where column D is numeric, and
Range = Offset(Sheet1!$T$3,0,0,Match("*",Sheet1!$T:$T,-1),1) where column T is text?
I had assumed that the offset value 3 would do this, but I suspect the functions count and match are not doing so.
I am trying to create a vlookup to get a count of trouble tickets techs completed daily within a table I created, I am using a table since its dynamic. For example I need to see how many tickets Joe completed in a day. See below...
Tech Ticket# Comments Status
Joe 1234 Replaced HD Closed
John 3212 Replace Motherboard Closed
Joe 5678 Installed OS Closed
Above is just an example (my table has 40 columns). I need to vlookup joe and get the count of the closed tickets.
So I was looking for reassurance or validation more than anything. From what I can tell you can in order to build a chart that is dynamic throughout a range, you use the offset and count or counta function - 1. That part isn't a problem. My question is once you created that for your charts do you just normally plot your chart range or do you have to reference the named range directly into the chart range?
View 2 Replies View RelatedDynamic named ranges - lots of them! ...
View 9 Replies View RelatedI have a stock chart that I want to update dynamically if the data record length changes. From the source data menu, I tried to use the following data ranges:
=OFFSET(Candles!$AB$8,1,0,COUNTA($AB:$AB)) ---> Date, x values
=OFFSET(Candles!$AD$8,1,0,COUNTA($AD:$AD)) ---> High
=OFFSET(Candles!$AE$8,1,0,COUNTA($AE:$AE)) ---> Low
=OFFSET(Candles!$AF$8,1,0,COUNTA($AF:$AF)) ---> Close
When I place any of these in the data range box under 'x axis labels or values', I receive the message "This function is not valid".
The MS webpage at http://office.microsoft.com/en-us/ex...098011033.aspx describes using these formulas but they don't appear to work.
I am creating a consolidation worksheet. It contains a macro that automatically copy data from other sources and paste it into my DB sheet. It already works, but I want to improve it. The source worksheet databases has been defined with the name “SOURCE”. Is there any way that I can make my macro look for this dynamic ranges directly, copy and paste it into my DB sheet. I am attaching an example of what my current macro is doing.
View 2 Replies View RelatedI've got a spreadsheet that I download a list of information into. The information relates to activities that are taking place e.g. start time, end time, type of activity (e.g. meeting) and duration (which identifies the length of the activity in 30 min slots e.g. 9.30am - 11.30am = 4).
The rest of the columns are labelled to represent the time in 30 min slots starting from 9am. What I would like excel to be able to do is to identify the first cell in the range which would be the cell that represents the start time in the row. Then from this cell fill cells in the row up to the end time with something - it doesn't matter what as long as the cell can be differentiated from the other blank cells in the row.
I don't think that I've explained myself that well so I've attached the spreadsheet for you to look at.
I'm having a fit with this formula; maybe the gurus will show me what I'm doing wrong. I have a list of area numbers along with dollar amounts that go with these area numbers. I have created a named range named "Areas" and another one named "MO_PD".
At the bottom of the worksheet I am doing a recap that takes the area number and sums all the entries in the MO PD column. This approach has been done before with Thomach's help. I'm trying to mimic it, but it's not working for me.
NOTE - I know that I can get around this using a pivot table, but I would like to use this approach for now. I would at least like to know what I'm doing wrong. Also, I'm not totally sure if I did the dynamic named ranges correctly so that may need to be fixed.
I've been working a macro that seems pretty simple, but has been giving me loads of trouble. I have about 20 worksheets in a Workbook, which all have a similar template (i.e. the data I'm interested in starts on row 14), but have different amounts (rows) of data in them. I want a macro that sorts all the data in ascending/descending order according to column Q. The problem that I am running into is not that the macro only works for the sheet that is active when I run the macro as opposed to every single sheet in the workbook ....
View 4 Replies View RelatedDoes COUNTIFS not work with named ranges/dynamic ranges? Everytime I try, I get a #VALUE! error. These are my 2 dynamic ranges:
ResultsM=OFFSET([results_list.xls]Results!$M$4,0,0,COUNTA([results_list.xls]Results!$M:$M),1)
ResultsQ=OFFSET([results_list.xls]Results!$Q$4,0,0,COUNTA([results_list.xls]Results!$Q:$Q),1)
The formula is simply:
=COUNTIFS(ResultsQ,"GENDER",ResultsM,"MALE"
However, this does NOT work. it returns the #VALUE! error. However, odly enough, when I use column references, it works:
=COUNTIFS([results_list.xls]Results!Q:Q, "GENDER", [results_list.xls]Results!M:M, "MALE")
This makes me think that COUNTIFS just don't work with named references..
I have just upgaded to Excel 2007 and previously used a Dynamic Range Wizard addin in Excel 2003 but it does not work in 2007. I think it originally come from Robert Bruce but can not find it on the web to get an update.
View 2 Replies View RelatedWorksheet A - I've set up a dynamic range to display the last 12 row entries of 2 columns
Worksheet B - pivot table of the range
The dynamic range is working perfectly, it displays the correct rows I can set up the data source once... the results on the pivot table display corectly
Problem When i press refresh, the data source "dissapears" and i have to rebuild the pivot table.
I have 153 rows of data to name, with a different offset formula per row.
View 8 Replies View RelatedI have a question regarding dynamic validation. I have attached a sample spreadsheet to clarify if my explanation doesn't. I have a list of codes that map to a list of other codes that are not one to one mapping. I would like for the other users of this code to populate what the correct code on our side is but without having to go thru the entire list in a validation field. (if that makes since)
Using validation before in a similar instance i used indirect to grab a named range to help shorten the list for them. However in this case that would be a ton of ranges i would have to set up! I've tried Match, countif and index in an offset formula in the validation list but can never get it to work!
I want to create a cascading combo box from some values that I have, ill explain how I approached it.
Cascading combo box is a combobox which values are obtained depending on the answer of a previous combo box.
So I set up a little table like so:
Categories Car Train Bike
Car Mercades First Honda
Train Ford Western Ducati
Bike Skoda Red Suzuki
and the combo boxes would be set aside from that.I collected the data in Named Ranges (A Range for Categories, A Range for Car, A Range for Train...)
The first data validation box contains = Categories the second data validation box contains =INDIRECT($C$2) (Where C2 was the range of the first validation box)
Once this was working, I decided to change the formula for the named ranges to allow me to add more values.
The formula was: =$F3$F8
I changed it to: =OFFSET($F$3,0,0,COUNTA($F3:$F96),1)
I expected this to work however, it just doesnt.... when clicking on the drop down arrow for the validation box, nothing happens. No box or values or dropdown.
In the attached workbook I have hard-pasted data in columns A:M that's designated as an Excel Table to make it dynamic.
In the adjacent columns O:AA I have formulae to extract data from A:M based on the "Frequency" stipulated in cell AD1,
I would like to be able easily to sort the data in the variable sized range in columns O to AA in descending order of the calculated values in column Z.
Best way to do this so that the formula don't get jumbled up or the blank cells in column Z end up at the top of the sorted data?