Editing Macro To Allow Dynamic Ranges?
Oct 31, 2011
having trouble editing the code to allow for dynamic ranges. I have tried to research online, but am having a hard time with it. I think I would understand better if I could see a practical example.
Here is the sample macro I recorded in Excel that I am working with:
Sub Macro1()
'
' Macro1 Macro
'
'
Cells.Select
ActiveSheet.Range("$A$1:$C$87").RemoveDuplicates Columns:=Array(1, 2, 3), _
Header:=xlNo
End Sub
How can I edit this to allow for dynamic rows and columns?
View 2 Replies
ADVERTISEMENT
Nov 30, 2011
I run a macro on a spreadheet in which the rows increase daily. In the macro I simply recorded an end.down to select a column of data which ends up being fixed row numbers in the code so the next time I run the macro it only selects the range I selected last time.
View 1 Replies
View Related
Jan 28, 2010
I am looking for a macro that will allow me to create a dynamic range based on the settings I give it. I would like the dynamic range to be called tracking_number and it to have a reference to =Offset(MainReport!$A$2,0,0,COUNTA(MainReport!$A:$A),1)
If this is possible I would really appreciate it. The reason I need this is because I have 2 workbooks. They are the one with the MainReport in it and then the Master workbook. Every day the workbook containing the MainReport is overwritten with more data, so I can not store a dynamic range and reference it each day.
View 9 Replies
View Related
Jun 1, 2006
I did the huge macro that names a bunch of dynamic ranges, all similar to the following: Range("=OFFSET(BD!$C$32,0,1,1,COUNT(BD!$32:$32))").Name = "ChtBDLabel"
I tested it as I went along, so I know it was working. Then I worked on several other tasks (copying the range to another location on the sheet, making graphs from the ranges). Now when I go back to run this again, I get: Run-time error '1004':
method 'Range' of object '_Global' failed. I went and looked what I thought were my named ranges, and they were wrong (not dynamic, just a cell reference). I deleted them and tried again with same error.
View 3 Replies
View Related
Feb 9, 2012
I am trying to create a simple xy graph in Excel 2010 using dynamic source data.
I have data in three columns.
There are headings on line 2 and the data starts on line 3.
A B C
1.
2. dp ss ff
3 .1 .2 .3
4 .3 .4 .4
5 .4 .8 .7
6 .1 .6 .8
7 .3 .5 .1
8 .5 .4 .4
I want to create an XY chart with C3 to C8 as the X axis (or dynamic to what ever the last data point is) with A3 to A8 as the Y axis (or dynamic to what ever the last data point is).
I have Defined names for C3 to C8 (myXvalues) and A3 to A8 (myYvalues).
I have created a simple XY graph and selected the ranges as normal.
This is =DATA(,Data!$C$3:$C$9,Data!$A$3:$A$9,1)
The page is named DATA
What I am trying to do now is to edit this range to make the range dynamic.Unfortunately I get error messages which ever way I try to edit the range.
I have tried:-
=SERIES('Data'!$c$3,'Data'!myXvalues,'Data'!$A$3,'Data'!myYvalues,1)
=SERIES('Data','Data'!myXvalues, 'Data'!myYvalues,1)
=SERIES(,Data!myXvalues,Data!$myYvalues,1)
=SERIES(Data!,Data!myXvalues,Data!myYvalues,1)
The data range can go from 8 to 30000 hence the need for a dynamic range!
PS: Also, is there any way to create this graph and dynamic source data in VBA. I have tried this with no success.
View 2 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Jun 21, 2009
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies
View Related
Sep 24, 2013
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
View 3 Replies
View Related
Feb 26, 2010
definitions for static ranges and dynamic ranges?
View 9 Replies
View Related
Feb 17, 2010
I'm trying to extend the range of a summation formula with a macro.
I've attached a dummy worksheet. I've named each cell in row 8 as well as the summation ranges they are calculating.
I am looking for the result of the macro to have each total's formula range to extend to to row 7 of its respective column.
View 9 Replies
View Related
Oct 28, 2008
I want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
View 5 Replies
View Related
Nov 18, 2009
I have a particular issue - i am trying to create a rolling correlation.
lets say you have two variables for 3 different months:
Month1 a x
Month2 b y
Month3 c z
correlation will correlate a-c with t-v
however, come next month - i have to manually drag the ranges for a rolling three month correlation:
Month1 a t
Month2 b u
Month3 c v
Month4 d w
correlation will now correlate b-d with u-w for a the last three months.
I want to automate this as I know what the month is, I can't seem to return the last three months and correlate the data.
I have tried to do this with the database functions, but I think that they break the array relationship of b-d and u-w in the correlation function.
View 9 Replies
View Related
Jan 20, 2007
In the example I have attached, I need 4 named, dynamic ranges to build a chart with:
1) Dates for the chart
always starting from A2 ... to whenever the LAST sum of B, C, D =0
(right now that would be A2:A30)
2) The Amounts
I need the amounts as 3 individual dynamic ranges, with no 0 values
(example - B2:B21, or c10:c14, etc)
3)The date column
same as #2, but just a single cell reference to show as a marker on the chart.
(example e21:e21)
I know someone here will think 'so what's the big deal' and pop it out in 30 seconds.
View 10 Replies
View Related
Oct 6, 2008
I'm trying to make ranges in a SumProduct formula dynamic, but getting errors #N/A. I think this is because the top two rows are headers, throwing off the range count.
Q. How do I adjust the range definition to compensate., e.g.
Range =Offset(Sheet1!$D$3,0,0,COUNT(Sheet1!$D:$D),1) where column D is numeric, and
Range = Offset(Sheet1!$T$3,0,0,Match("*",Sheet1!$T:$T,-1),1) where column T is text?
I had assumed that the offset value 3 would do this, but I suspect the functions count and match are not doing so.
View 8 Replies
View Related
Feb 24, 2012
I am trying to create a vlookup to get a count of trouble tickets techs completed daily within a table I created, I am using a table since its dynamic. For example I need to see how many tickets Joe completed in a day. See below...
Tech Ticket# Comments Status
Joe 1234 Replaced HD Closed
John 3212 Replace Motherboard Closed
Joe 5678 Installed OS Closed
Above is just an example (my table has 40 columns). I need to vlookup joe and get the count of the closed tickets.
View 6 Replies
View Related
Mar 25, 2014
So I was looking for reassurance or validation more than anything. From what I can tell you can in order to build a chart that is dynamic throughout a range, you use the offset and count or counta function - 1. That part isn't a problem. My question is once you created that for your charts do you just normally plot your chart range or do you have to reference the named range directly into the chart range?
View 2 Replies
View Related
May 21, 2014
I have monthly sales, and i wanna be able to sum the last-twelve month sales, when i select the month from a drop-down list. For example, when i select Feb14 from the drop-down, I want the formula to sum the sales between mar13-feb14. how can i accomplish that?
Select Month
Feb14
LTM Sales
?
[Code] ..........
View 7 Replies
View Related
Aug 20, 2009
Dynamic named ranges - lots of them! ...
View 9 Replies
View Related
Jan 20, 2010
I have a stock chart that I want to update dynamically if the data record length changes. From the source data menu, I tried to use the following data ranges:
=OFFSET(Candles!$AB$8,1,0,COUNTA($AB:$AB)) ---> Date, x values
=OFFSET(Candles!$AD$8,1,0,COUNTA($AD:$AD)) ---> High
=OFFSET(Candles!$AE$8,1,0,COUNTA($AE:$AE)) ---> Low
=OFFSET(Candles!$AF$8,1,0,COUNTA($AF:$AF)) ---> Close
When I place any of these in the data range box under 'x axis labels or values', I receive the message "This function is not valid".
The MS webpage at http://office.microsoft.com/en-us/ex...098011033.aspx describes using these formulas but they don't appear to work.
View 9 Replies
View Related
Sep 21, 2006
I am creating a consolidation worksheet. It contains a macro that automatically copy data from other sources and paste it into my DB sheet. It already works, but I want to improve it. The source worksheet databases has been defined with the name “SOURCE”. Is there any way that I can make my macro look for this dynamic ranges directly, copy and paste it into my DB sheet. I am attaching an example of what my current macro is doing.
View 2 Replies
View Related
Feb 21, 2007
I've got a spreadsheet that I download a list of information into. The information relates to activities that are taking place e.g. start time, end time, type of activity (e.g. meeting) and duration (which identifies the length of the activity in 30 min slots e.g. 9.30am - 11.30am = 4).
The rest of the columns are labelled to represent the time in 30 min slots starting from 9am. What I would like excel to be able to do is to identify the first cell in the range which would be the cell that represents the start time in the row. Then from this cell fill cells in the row up to the end time with something - it doesn't matter what as long as the cell can be differentiated from the other blank cells in the row.
I don't think that I've explained myself that well so I've attached the spreadsheet for you to look at.
View 4 Replies
View Related
May 2, 2007
I'm having a fit with this formula; maybe the gurus will show me what I'm doing wrong. I have a list of area numbers along with dollar amounts that go with these area numbers. I have created a named range named "Areas" and another one named "MO_PD".
At the bottom of the worksheet I am doing a recap that takes the area number and sums all the entries in the MO PD column. This approach has been done before with Thomach's help. I'm trying to mimic it, but it's not working for me.
NOTE - I know that I can get around this using a pivot table, but I would like to use this approach for now. I would at least like to know what I'm doing wrong. Also, I'm not totally sure if I did the dynamic named ranges correctly so that may need to be fixed.
View 9 Replies
View Related
Jun 29, 2007
I've been working a macro that seems pretty simple, but has been giving me loads of trouble. I have about 20 worksheets in a Workbook, which all have a similar template (i.e. the data I'm interested in starts on row 14), but have different amounts (rows) of data in them. I want a macro that sorts all the data in ascending/descending order according to column Q. The problem that I am running into is not that the macro only works for the sheet that is active when I run the macro as opposed to every single sheet in the workbook ....
View 4 Replies
View Related
Jul 1, 2007
Does COUNTIFS not work with named ranges/dynamic ranges? Everytime I try, I get a #VALUE! error. These are my 2 dynamic ranges:
ResultsM=OFFSET([results_list.xls]Results!$M$4,0,0,COUNTA([results_list.xls]Results!$M:$M),1)
ResultsQ=OFFSET([results_list.xls]Results!$Q$4,0,0,COUNTA([results_list.xls]Results!$Q:$Q),1)
The formula is simply:
=COUNTIFS(ResultsQ,"GENDER",ResultsM,"MALE"
However, this does NOT work. it returns the #VALUE! error. However, odly enough, when I use column references, it works:
=COUNTIFS([results_list.xls]Results!Q:Q, "GENDER", [results_list.xls]Results!M:M, "MALE")
This makes me think that COUNTIFS just don't work with named references..
View 8 Replies
View Related
Jun 5, 2008
I have just upgaded to Excel 2007 and previously used a Dynamic Range Wizard addin in Excel 2003 but it does not work in 2007. I think it originally come from Robert Bruce but can not find it on the web to get an update.
View 2 Replies
View Related
Nov 5, 2008
adds the file name into column A if it could also hyperlink it to that file. 2nd, Change it so it doesn't start a new workbook and worksheet. I would like it to just run in the Workbook it is in and each time the macro runs or the workbook opens it updates any info that has changed.
View 5 Replies
View Related
Nov 24, 2006
i currently have created a macro for copy a selection of cells from one work book to another. The file were i am copying the cells from is Track_&_Trend_00.xls. In this there is a password to open and modify. The sheet that the cells are being pasted to is TRACK & TREND.xls. There is no password on this. My macro runs fine only that midway through it asks for the password to open and the password to modify for the sheet Track_&_Trend_00.xls.
I wonder ifany one would know about entering input lines of code below to automatically put these passwords in and not having the two password dialog boxes pop up midway through running the macro.
Range("A8").Select
ChDir "T:Track & Trend"
Workbooks.Open Filename:= _
"T:Track & TrendTrack_&_Trend_00.xls"
ActiveWindow.SmallScroll Down:=-102
Range("A8:S115").Select
Selection.Copy
Windows("TRACK & TREND.xls").Activate
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveWorkbook.Save
View 9 Replies
View Related
Jan 7, 2014
Worksheet A - I've set up a dynamic range to display the last 12 row entries of 2 columns
Worksheet B - pivot table of the range
The dynamic range is working perfectly, it displays the correct rows I can set up the data source once... the results on the pivot table display corectly
Problem When i press refresh, the data source "dissapears" and i have to rebuild the pivot table.
View 12 Replies
View Related
May 6, 2014
I have 153 rows of data to name, with a different offset formula per row.
View 8 Replies
View Related
Nov 24, 2008
I have a question regarding dynamic validation. I have attached a sample spreadsheet to clarify if my explanation doesn't. I have a list of codes that map to a list of other codes that are not one to one mapping. I would like for the other users of this code to populate what the correct code on our side is but without having to go thru the entire list in a validation field. (if that makes since)
Using validation before in a similar instance i used indirect to grab a named range to help shorten the list for them. However in this case that would be a ton of ranges i would have to set up! I've tried Match, countif and index in an offset formula in the validation list but can never get it to work!
View 2 Replies
View Related
