Sub ReplaceUnderScores()
Selection.Replace What:="_", Replacement:="/", LookAt:=xlPart, _
SearchOrder:=xlByColumns, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
I want it to do this for range AL2 through AL2000. Ive tried a few codes trying to get it to work, but cant figure it out.
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
See attached workbook. If you hit the Export button (runs Export Macro), it creates a new workbook. Most of what I have in the code works fine except the following bit:
View 2 Replies View RelatedI have been searching for an answer on this but unfortunately to no avail. I think it is xlEnd or down?
I am using the following
This code is coulnm specific, can this code be adapted to look through a range for a match i write this code up to 25 time changing the column it looks at each time, the row always stays the same the location it paste to also always stays the same if it could be made to look through a range in reducing the amount of code to write.
the range it needs to look through would be, row 6 from column B to column Z.
the line i am hoping to adjust for this is below it reads: "WST.Cells(6, 2)Then"
HTML Code:
If WS1.Cells(8, 2) = WST.Cells(6, 2) Then
WST.Cells(7, 2).Resize(30, 1).Copy
Worksheets("torr1").Cells(9, 5).PasteSpecial Paste:=xlPasteValues
nextrow = nextrow + 1
End If
I have two workbooks the first named "number" which just contains the number 50000 on sheet 1 cell A1. This "number" workbook is always closed and saved in c:me"number". The second named "sales" has a form control button with code as follows and is always opened and saved in c:me
Sub next invoice()
range ("A1"). Value= range ("A1"). value+1
End sub
When I press the button this code does not work because I am missing the vba code to find the close file.
I have a sorted range from the highest to the lowest in range B8:B50000. I need to find the first cell with zero value and last cell with zero value in this range. Then the these rows are selected and deleted.
View 4 Replies View RelatedWhen I'm using the Macro recorder or even after I've completed a sequence is there a way to change the range so it code always covers the complete range of the data?
View 9 Replies View RelatedI have recorded the following Macro...
Sub CopyTest1()
Range("B5:E40").Select
Selection.Copy
Sheets("List2").Select
Range("B5").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I'm trying to transpose 5 cells vertically into 5 cells horizontally, then do the next 5 verticals under the 5 horizontals. See attached spreadsheet for Column A (original data) and horizontal data (result). VBA code would be most useful, and original data could potentially be 600 cells long.
View 5 Replies View Relatedhow to make such code by VBA. but i'm desperate to have it.
I need a code to copy a two different ranges from two sheets and paste them below the original ranges in each sheet "a range a sheet". And then if a clicked again the same ranges should be pasted after and so on so forth.
I have attached a spreadsheet...I'm trying to select Range A1:N16 using VBA code...
Range(activecell,activecell.end(xltoright)).select
Range(selection,selection.end(xldown)).select
When I use this code is only gets A1:N6...: is there anyway to get it to select the range all the way to the end of the data. I tried CurrentRegion and some other stuff but can't get it to work.: The range may go upto line 500 or 3 I just never know.
I want to try and do is as follows:
- go through all the worksheets in the workbook
- if the sheets begin with A, C or P
- and if monthly index = 0
- sum the range of cells - B33:L51
- output the value into cell L52
- etc
So far this is what I got
For i = 1 To Sheets.Count
If Left(Sheets(i).Name, 1) = "A" Or Left(Sheets(i).Name, 1) = "C" Or Left(Sheets(i).Name, 1) = "P" Then
If (MonIndex = 0) Then
SUM(B33:L51)
ElseIf (Index = 2) Then
SUM(B34:L51)
ElseIf (Index = 3) Then
SUM(B35:L51)
End If
My questions really are - how do u write the code for it to generically know to sum the range B33-L51 for like all sheets required. - and is it possible to output that value to a specific cell in each sheet?
I am writing some code to help speed up data input into Excel. I take the info from the user through a form. Before pasting the data into a spreadsheet, I need to check that there is no data there already.
How can I check that the sum of range of cells in excel, as specified by the user in the form, is Zero?
I want to do this in the code rather than enter another cell in excel and sum it there
I have this VBA (from a recorded macro) how can I amend it so that these two formulas change depending on the number of values....right now the range is to 129 only because we only have 129 cells of info but some sheets will have more some will have less. I want excel to base it based on the column I which used to be H.
VB:
Sub SLCREPORTDATA()
Cells.Select
Range("F1").Activate
Cells.EntireColumn.AutoFit
Columns("H:H").Select
[Code]....
Here is the file rCell.xlsm, in order for the code to execute you need to select the green cell. When you hit the macro a copy of the workbook is placed on your desktop. The code then tries to copy a range from the copied workbook and paste it in the original macro workbook. The pasting part is crashing. In the code i marked the issue in red.
View 1 Replies View Relatedadding an second range (J1089:AI1147) to the follwing code.
Code:
Sub Clear_Range()
Application.EnableEvents = False
With Range("H3:AL1058")
[Code]....
I thought i would create some code to highlight a batch of cells so i can modify formatting all together rather than cell by cell
I am unable to get the generated code to select all ranges together, it only shows the last range
Here is my code
Code:
Sub SelectRanges()
'
' Macro1 Macro
'
'
Range("D12:H12").Select
[Code]....
The code below puts a green border around the cell that is beneath 10 in my chosen range, however I wish to add the border to the row of information instead of just the cell. My columns of data are from columns E to M, but the criteria for whether or not the data gets a green border is in column D....so lets say D15 is less than 10, I would want a border to go around E15:M15.
Sub Test()
For Each c In Range("D2:D350")
If c < 10 Then
c.select
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 4
End With
Here is my
Dim value1 As String
value1 = "=OFFSET($B$6,$A6-1,0,1,1)"
Range("g6:ad12").Formula = "=SUMIF(OFFSET(" & value1 & "!$j$6,0,0," & value1 & "!$A$5,1),(" & value1 & "!AS$5)-1,OFFSET(" & value1 & "!$n$5,1,0," & value1 & "!$A$5,1))"
my "value1" needs to equal the value in the corresponding row for the formula. For example:
B6 = "BEA"
B7 = "GE"
B8 = "TAS"
My formula only gets cell B6 value and doesn't pick up B7 or B8 as the formula copies from G6:AD12
how do i get it to pick up B7 then b8?
This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Cells.Count = 1 Then
If Target.Column = 1 And Target.Value "" Then
Range("b1").Value = Target.Value
End If
End If
End Sub
I am trying to find a code that will copy a Range (MasterMinutes) from one Worksheet and then paste it on another worksheet titled "Master"
After it has been pasted I need to select the used area (EXCEPT for the first row) on the Master and Sort it by Columns B C and D (all ascending)
I got this code I have been trying to solve but it does not work...
What I need to do is define a worksheet and a range of that worksheet.
I can only seam to work out either a worksheet or a range but not the two together.
Private Sub cmd_Cform_Click()
Dim rng As Range
Set rng = Range("A1")
With Sheets("Customer")
rng = .Range("A1")
Application.CommandBars.FindControl(ID:=860).Execute
End With
End Sub
I have created the following code by recording a macro. The ActiveCells (“A1.A5203”) were based upon the actual number of records at that time. I wish for this macro to be used in a template and the actual number of records will vary from time to time. What do I need to add to this code to allow the AutoFill function to operate and fill only the actual number of records that exist.
ActiveCell.FormulaR1C1 = "=LEN(RC[-2])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
ActiveCell.Offset(0, 1).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]=8,""0""&RC[-3],RC[-3])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
I am tryin to sum up the range if the given coditions are met. But unfortunately it aint working properly. It is basically summing up the entire range.
Sub SysDown()
Dim Count As Long
Dim Rowend As Long
Dim Total As String
Count = 2
Rowend = 2
While Cells(Rowend, 3) ""
Rowend = Rowend + 1
Wend
Total = 0
While Count
As a part of a much larger routine, I need a code to find five consequetive cells in a column with identical value "XYZ" and select the first one of them. Say,
I have a column:
apples,
pears,
apples,
oranges,
xyz,
oranges,
xyz,
xyz,
xyz,
apples,
apples,
apples,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
etc.
I need to select the twelfth cell in this column, highlighted red.
I guess there could be some complicated if-then loop to go through the whole column, checking each cell and comparing it to the next four, but it would take forever to excecute... Is there some other way around? To find the first occurence of five xyz's one directly under another?
I have a worksheet with a column that lists the city where an item is located. If the city is say Austin I need to find the last cell in the range that has Austin in it. I can find lots of examples where you can find all instances within the range and to find the last cell in the range that has any data in but nothing that tells me how to find the last cell in the range that has a specific value.
View 9 Replies View RelatedI need a macro that keeps only the top 25 rows in the current range and deletes the rest.
View 9 Replies View RelatedThis ia a recorded code to draw borders around cells on a given range
I am sure it can be shortened to 1-2 sentences!
Range("J11:O16").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic