I am trying to find a code that will copy a Range (MasterMinutes) from one Worksheet and then paste it on another worksheet titled "Master"
After it has been pasted I need to select the used area (EXCEPT for the first row) on the Master and Sort it by Columns B C and D (all ascending)
i am trying to make a VBA that will find a certain value (BELCS), select the value, and copy it to another worksheet. this is what i have so far:
For Each BELCS In ActiveSheet. Range("B2:B" & ActiveSheet.Range("B51161").End(xlUp).Row)
If BELCS.Value = "BELCS" Then
BELCS.Select
Selection.Copy
Sheets("BELCS").Select
ActiveSheet.Paste
End If
Next BELCS
i am trying to get it to select the whole row when it finds that value but when it runs it says that i can't make a selection of the BELCS,
So I have an option on my userform that the user input selected.
I need the data once written to the worksheet [Master] to move based on cell AD [Customer Divert / TBP Divert / Failed Delivery]
Example: Row 12 has Customer Divert in cell AD I need to keep a copy on the master sheet but also copy the entire row to the customer divert sheet.
Need code and here to input in the Code sheet?
I have two workbooks: Workbook1 has two sheets – Cash Register and Suppliers; and Workbook2 has one sheet – Clients. The users of Workbook2 do not have access to Workbook1, and information entered in Workbook2 is required (and has to be manually re-entered) in Workbook1.
I tried IFs and VLOOKUPs to pull the data, but due to the large number of cells, the workbook is awfully slow – taking a very long time to save (even with Automatic Calculation/Recalculate before save turned off).
I am using Excel 2007.
This is what I am trying to achieve:
When a user enters an ID number, which begins with either “S” (e.g., SB-00010) or “P” (e.g., PADA-012-034-0567), in column E of Cash Register:
(1)
If that ID number begins with “S”, I want the code to look up that ID number in column A of Suppliers and copy the corresponding cell from each of the following columns:
B
C
D
E
F
G...........
I am trying to copy worksheet between 1 workbook to another. But even the worksheet was successfully copied but the code inside wasn't. Do I need to copy the VBA module manually (create new proc/sub) ? Or there is a setting during Worksheet copy process?
View 4 Replies View RelatedI am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
I am revamping someones Monthly Stat sheet for them. I am hoping to get a code that will copy the most current sheet which will always be the last one of the Workbook. I then would like the user to be Prompted to rename the sheet (Unless it can automatically generate the name which would be the next month). For example the sheet I need to copy is currently "January 2008" AND THE new sheet should be titled February 2008. At the end of February they need to run the code again and the sheet will of course be named March 2008 and so on...
The other thing I need to do is after the sheet is named:
1) I need the sheet named placed in cell A1 of the NEW sheet
2) I need to copy the VALUES in E9 to O9 and Paste them into E5 to 05 of the Newly created sheet
What VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
View 4 Replies View RelatedHere is the code I have:
Windows("2.xlsm").Activate
Sheets("Report_P").Select
Sheets("Report_P").Copy After:=Workbooks("New_report.xlsx").Sheets(9)
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
I am trying to put together some code to have Excel to copy all the text files from a folder with numerous text files, all of which have identical formatting, to one worksheet. Furthermore, I need the copying event to occur every time the workbook is opened so that it will "refresh/overwrite" the worksheet with all of the files in the folder.
I have lifted some code from several sites which would seem to an untrained eye to accomplish what I am trying to get done, however I run into a file path error.
I need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.
Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?
i have a workbook with over 600 worksheets and any vba code to do the following.... (each worksheet contains different number of lines)
At the moment the data is in columns a to d
What i need is the data currently in cell a1 (in each worksheet) to appear beside every line in that worksheet
Then i need to take all this data and put it onto one single worksheet .
I am using the following code to copy the contents of a DDE feed.
Code:
Private Sub Worksheet_Calculate()
Worksheets("Sheet2").Range("A1").EntireRow.Insert Shift:=xlDown
Worksheets("Sheet1").Range("A3:F3").Copy
Worksheets("Sheet2").Range("A1:F1").PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End Sub
What I want to do is only copy the row when the columns contain data, as it stands at the moment it's copying blank rows to sheet 2. Is there a way that I can do this?
writing a code where i can copy a worksheet (Sheet1), insert a new worksheet at the END (as the last worksheet), and paste to that new worksheet (which will have a different name each time a new one is added). I am using the code below, but it adds a worksheet after Sheet1 instead of at the end, and it also adds another weird worksheet that says "Dim Worksheet" in one cell, and "Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet)" in another. This is not in the VBA window, it is just text in a cell in another inserted worksheet. I only want one worksheet added at the end that I can paste too (knowing that the inserted sheets will always have new names).
Code:
Sub CreatePercentageSheet()
ActiveWorkbook.Sheets("Sheet1").Copy _
After:=ActiveWorkbook.Sheets("Sheet1")
ActiveWorkbook.Sheets.Add After:=Worksheets(Worksheets.Count)
ActiveSheet.Paste
End Sub
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.
I have a worksheet containing code to hide itself when the sheet is deselected:
Private Sub Worksheet_DeActivate()
Sheet16.Visible = xlSheetVeryHidden
End Sub
After unhiding this sheet and modifying it, I copy it. This new copy becomes the 'production' copy, and the self-hiding sheet is blanked, leaving me with a hidden blank template and a new sheet. However, the self-hiding code is copied along into the new sheet. I'm looking for a way to delete the sheet code from the copy. The best I've found is how to remove a module from the workbook.
Sub New_Sheet()
ActiveSheet.Copy After:=Sheets(1)
ActiveSheet.Name = Range(" F8").Value
Sheet16.Visible = True
Sheet16.Select
Range("B13:F22").ClearContents
Sheets(2).Select
ActiveSheet.Shapes("Button 1").Delete
Range("A8").Select
ActiveSheet.PageSetup.PrintArea = Range("A1:R35").Address
Call Sort_Sheets
End Sub
I got this code I have been trying to solve but it does not work...
What I need to do is define a worksheet and a range of that worksheet.
I can only seam to work out either a worksheet or a range but not the two together.
Private Sub cmd_Cform_Click()
Dim rng As Range
Set rng = Range("A1")
With Sheets("Customer")
rng = .Range("A1")
Application.CommandBars.FindControl(ID:=860).Execute
End With
End Sub
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
[URL] .....
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
View 2 Replies View RelatedI have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
View 2 Replies View RelatedI have an excel sheet being used as a mini database table.Rows = records, columns = fields. I have some VBA to create a copy of base template in the workbook, then populate the new template with the data from a row/record in the db. I currently have about 100 records. After about the 57th record I recieve RT error 1004. "Copy method of worksheet class failed". I think this is becuase excel is running out of memory. My laptop has 1gig of ram, and i have closed all other apps when running the macro.
Is there a way to free up memory while the vba is running, without clearing my "for" or count position which tells the macro to create a new sheet and which row/record in the db to populate the data in the new sheet.
I have recorded the following Macro...
Sub CopyTest1()
Range("B5:E40").Select
Selection.Copy
Sheets("List2").Select
Range("B5").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have the following code that Ger Plante very kindly helped me with which, depending on whether there is an 'x' by someone's name in a list, creates a new workbook, copies some information to it and saves it before moving on to the next 'x'. Loop Through Rows & Copy Each Row To New Workbook
For lLoop = 2 To 251 'first row of data to last row.
If ws1.Cells(lLoop, 4).Value = "x" Then '4 = Column D
ws1.Activate
ws1.Range("e" & lLoop & ":g" & lLoop).Copy
ws1.Range("B1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=True
Rng1.Copy
Workbooks.Add
ActiveSheet.Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteColumnWidths, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
ActiveSheet.Range("A1").Select
ActiveSheet.SaveAs varPath & "Student Data Files" & ActiveSheet.Range("B1") & ".xls"
ActiveWorkbook.Close
Else
End If
Next lLoop
how I can modify the code such that any cells in the range "b1:b504" in Sheet1 of the the new workbook can't be selected or edited without a password....I have tried unsuccessfully using Protect but am not sure how to get vba to set it to specific cells and determine exactly what is allowed in those cells.
I am using Andy's scrolling chart, and it is working well. http://www.andypope.info/charts/Scrolling.htm. Is there a way to paste the data the chart is displaying into a new sheet? In VB I tried to copy the named range and paste it but it did not work.
View 2 Replies View RelatedOk then, I can do this with record macro and it works ok, but im sure theres a nice way to get VBA to do this quicker and make it work for every row.
Story is - I have a spreadhset - which will have data in rows as normal. Each row when completed will have a button which when clicked - creates a new worksheet by copying one already there, then populates this new worksheet with the data from the first worksheet.
Dont ask why I am not allowed to use MS Access for this as its a bit of a long story.
This is what the record macro VBA shows - this works ok as I said but obviously takes a good few seconds and jumps around etc until its competed.
Code:
Sub create()
'
' create Macro
[Code]...
The purpose of my following code is as below:
1. Add new worksheet (say ws2)
2. Activate the worksheet ws2
3. Copy a predefined range from already open workbook (say ws1)
4. Select the target cell in ws2 through user prompt by using mouse or keyboard
5. Paste the copied range from ws1 at this location of ws2
I am facing problem in selecting the cell in ws2 as ws1 always remain in foreground.
Sub CreateNewWorkBook(RValue As String)
Dim wbA As Workbook
Dim wbB As Workbook
Dim sTemp As String
Dim rRange As Range
Set wbA = ThisWorkbook
wsName = ActiveSheet.Name
Set wbB = Workbooks.Add
WorkBookName1 = wbA.Name
WorkBookName2 = wbB.Name......................
I have this code that copy/pastes a range from another sheet for every nth row. In the code I have pasted cells I need to merge the cell with the cell to the right and format it. I thought I was doing ok but the code keeps returning an error (run-time 1004) and I don't know the solution, it is beyond my level of VBA.
Code:
Sub test()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim lngRowCounter As Long
Dim newRowCounter As Long
[Code] ...
The code in red is the problem and I have commented it out so it can run, but I need it to merge and format. I don't know how to address range/cells in column B and C together (they are the two cells I wish to merge and format).
I have a long header I am pasting to a column "A" on a new Sheet. When the header pastes it is repeating itself but with long blank spaces in between each repeat. The first time goes from A1 to A152, which is all I want. But it shows up again starting at A180225, and again at A212993, and again and again. I only want a single instance of the header in Column A. Here is the macro I am using:
Sub Sort_Cells()
Rows("1:1").Select
Selection.Copy
Sheets.Add after:=Sheets(Sheets.Count)
Sheets("Sheet1").Select
Columns("A:A").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
True, Transpose:=True
Selection.Columns.AutoFit
Range("B1").Select
End Sub
I would like a Macro that can copy values from 5 rows in a worksheet, starting from Row 1. Each "Batch" copied to a new worksheet should contain values from 5 rows, so first batch would be from Row 1 - Row 5 → copied to Sheet 1 , then Row 6 - Row 10 → copied to Sheet 2 , then Row 11 - Row 15 → copied to Sheet 3 ...... etc. This should be done until there are no values in the last row.
So, the workbook would start off with only one worksheet, which could be named "source" for convenience and end up with many more sheets depending on how many rows are in the source worksheet, which can vary from time to time. There are 3 other "contraints/conditions that need to be considered 1. the number of columns in the "source worksheet may vary from 5 columns up to 30 columns. 2. The formatting that was applied to the values in the "source" worksheet need to be maintained. 3. The data posted should start in cell A1 for each new sheet.
Creating a worksheet to consolidate his financial data. I've been able to muck my way through most of the VBA code by looking at examples on the forum. However, I cannot figure out how to add the last loop or where to place it. I can copy the values from the P&L sheet to the DATA sheet but I cannot discover a way to also pull the values from the BalSht sheet to the Data sheet. I think the BalSht loop will be almost identical to the "P&L sheet loop, and be placed just below it - but I'm not successful in multiple attempts and days of trying. How can I accomplish this?
Here's the VBA code:
VB:
Sub NewISCopy()
On Error Goto errorHandler
'*************************************************************
Dim CopyCol As String
Dim PasteCol As String
CopyCol = "G"
[Code]...
Excel file attached.
FI-LOOP-5.xlsm
