This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Cells.Count = 1 Then
If Target.Column = 1 And Target.Value "" Then
Range("b1").Value = Target.Value
End If
End If
End Sub
The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...
way I can adjust this code to stop it from continuously calculating? ...
when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("A1").Value = "True" Then
Range("A2").Value = 5
Range("A3").Value = 6
Else
End If
Application.EnableEvents = True
Exit Sub
End Sub
I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address
Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Worksheet
Dim shtChild As Worksheet
Dim lngRow As Long
Dim intCol As Integer
Dim strValue As String
Dim Target As Range
Dim rng As Range
Application.ScreenUpdating = True
Application.StatusBar = False
Set sht = Sh............
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI require the following part of the code to target 2 cells G10 and N536
i guess this is simple but just not sure how it will work
Case Target.Address = "$G$10"
If Not IsDate(Target.Value) Then Exit Sub
Dim DateSuffix As String
Select Case Day(Target.Value)
Case 1, 21, 31
DateSuffix = "st"
Case 2, 22
DateSuffix = "nd"
Case 3, 23
DateSuffix = "rd"
Case 4 To 30
DateSuffix = "th"
End Select
Application.EnableEvents = False
Target.Value = Format(Target.Value, "d") & DateSuffix & Format(Target.Value, " mmmm, yyyy")
Application.EnableEvents = True
End Select
I have this piece of Code which I am trying to tweak;
Code:
If Target.Offset(0, 1) = "" Then
Target.Offset(0, 1).Activate
Add: Rspn = InputBox("Please enter the Colour Code for " & Target.Value, "Validating Data Integrity")
[Code] .......
What happens is that the user Enters a Color, say Copper, then an Input Box appears with a message:
Please enter the Color Code for Copper. What I would like to achieve is to have the word Copper displayed in Quotes. i.e. "Copper".
I would like to add one more "And" to the code below: If Target is in Column M
[code] If Target "" And Range("B1") = 1 Then[/code)
When ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code
=IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
=IF(#REF!>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O567,calculation!O567),"")
I have added this bit of code to change the apperance of entered time from 0835 to 08:35
UserInput = Target.Value
If UserInput > 1 Then
NewInput = Left(UserInput, Len(UserInput) - 2) & ":" & Right(UserInput, 2)
Application.EnableEvents = False
Target = NewInput
Application.EnableEvents = True
End If
And it works like a charm. Except that if the content in one of the cells later is deleted a "Run time error 13" is the result. Debug leeds to the line "If Userinput >1 Then"
Can this error be avoided..?
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
View 2 Replies View RelatedIs it possible to pass a typed array byval into a sub of function?
i.e.
Sub test()
Dim arr() As Integer
Call testfunc(arr)
End Sub
Function testfunc(ByVal arr As Integer)
End Function
Basically, I'm trying to do this:
View 11 Replies View Relatedlook at the attached workbook for an example of what i am trying to acheive and if possible modify or add another macro
in d7 i need a formula that equates to =C7-J7 where the column 'J' is known only by the 'TargetRange'.
Formula = "=c7-" & ccc & "7"
but what is required to reference the 'ccc' (TargetRange) column?
I have this simple requirement
Business ProcessBp1Bp2Bp3Bs. Consulting
The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...
for this i have written validation macro
If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then
do the validation;
end if;
this works fine, but i need to use or condition , is there any better way to write this, a more compact way,
I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.
View 4 Replies View RelatedWhy doesn't the IS operator return True when comparing Target to a range in VB when they are indeed the same? Why do we have to keep backing in via rng.Address = Target.Address or Not Intersect() Is Nothing?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
****
****'_____Works_____
****If Target.Address = "$B$2" Then
********Application.StatusBar = "To Be"
****Else
********Application.StatusBar = "Not to be"
****End If
****
****'_____This fails_____
****If Target Is Range("A1") Then
********Application.StatusBar = "A1 sauce anyone?"
********
****'____But this works_____
****ElseIf Not Intersect(Target, Range("A1")) Is Nothing Then
********Application.StatusBar = "¿Alguien quiere salsa A1?"
****End If
End Sub
Again - this is just me wondering why... Am I missing something terribly obvious here?
(Edit) I am guessing it has to do with the Target argument for SelectionChange() coming in ByVal instead of ByRef, but not sure... (End Edit)
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
View 3 Replies View RelatedI am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.
View 2 Replies View RelatedI have a target range for a worksheet change. Then when finished I highlight the data and press 'delete' I get an error within the code.
View 2 Replies View RelatedI have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
View 2 Replies View RelatedI am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
View 2 Replies View RelatedI am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
I want to create a chart that shows "Gap to Target. See attached Sample spreadsheet for more info.
Note how the yellow part of the chart is formulaic...is actually the chart...and the green bar over it is manually pasted. That green bar is supposed to be "result" and that yellow gap is supposed to represent the difference between Targeted sales and the actual Result.
How to actually build the green part into the chart? Every time I try, it just adds them together and doesn't show the gap.
Example.xlsx‎
Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
View 2 Replies View RelatedI have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code:
Sub CopyData()
Range("I2").Copy
Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End Sub
Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$I$2" Then
Call CopyStuff
End If
End Sub
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
what the Taget.Address relates to in VBA. I cant figure it out, how can this be used?
View 9 Replies View Relatedin selection change event how to identify formula in target?
View 9 Replies View Related