I have recorded the following Macro...
Sub CopyTest1()
Range("B5:E40").Select
Selection.Copy
Sheets("List2").Select
Range("B5").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I am trying to find a code that will copy a Range (MasterMinutes) from one Worksheet and then paste it on another worksheet titled "Master"
After it has been pasted I need to select the used area (EXCEPT for the first row) on the Master and Sort it by Columns B C and D (all ascending)
I am using Andy's scrolling chart, and it is working well. http://www.andypope.info/charts/Scrolling.htm. Is there a way to paste the data the chart is displaying into a new sheet? In VB I tried to copy the named range and paste it but it did not work.
View 2 Replies View RelatedI have this code that copy/pastes a range from another sheet for every nth row. In the code I have pasted cells I need to merge the cell with the cell to the right and format it. I thought I was doing ok but the code keeps returning an error (run-time 1004) and I don't know the solution, it is beyond my level of VBA.
Code:
Sub test()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim lngRowCounter As Long
Dim newRowCounter As Long
[Code] ...
The code in red is the problem and I have commented it out so it can run, but I need it to merge and format. I don't know how to address range/cells in column B and C together (they are the two cells I wish to merge and format).
I have a long header I am pasting to a column "A" on a new Sheet. When the header pastes it is repeating itself but with long blank spaces in between each repeat. The first time goes from A1 to A152, which is all I want. But it shows up again starting at A180225, and again at A212993, and again and again. I only want a single instance of the header in Column A. Here is the macro I am using:
Sub Sort_Cells()
Rows("1:1").Select
Selection.Copy
Sheets.Add after:=Sheets(Sheets.Count)
Sheets("Sheet1").Select
Columns("A:A").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
True, Transpose:=True
Selection.Columns.AutoFit
Range("B1").Select
End Sub
I cant seem to get to work together in the same macro but that work great seperated. I need them to be in the same macro. The first just simply copy's text from one workbook to another:
Sub Test2()
ActiveSheet. Range("a1").Copy _
Destination:=Workbooks("punchlist.xls"). Sheets("Sheet1").Cells(Rows.Count,1).End(xlup).Offset(1,0)
End Sub
That worked ok but I needed to change it to the "active cell" instead of cell "a1". So then this line of code was made:
Dim userInputCell As Range
On Error Resume Next
Set userInputCell = Application.InputBox("Use the mouse to select a cell on any sheet", type:=8)
On Error Goto 0
If userInputCell Is Nothing Then
MsgBox "Cancel pressed"
Else
Msgbox "You selected " & userInputCell.Address(,,,True)
End If
The second code works just the way I want it but it doesnt copy over the text to the other workbook. I assume the 2 codes need to be together but I cant get it to work without errors. I also need the text to copy over without changing the borders on either workbook.
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
I'm developing a loan processing system for members of a club. When an applicant asks for a loan, the club will calculate 10 % of that interest and the applicant will have to pay it back in 5 successive fortnightly instalments. If he asks for a loan in the first fortnight (1), for example, he will have to start paying instalments in fortnights 2,3,4,5,6 to pay it all back.
The system currently has 4 worksheets. The first sheet is a the loan application form. The cells outlined in thicker border, are the cells in which details must be input. Once it is input, the data will be automatically placed in the Processing worksheet using IF and VLookup functions (See spreadsheet attached), which is used as a basis for the loan schedule Worksheet. What I need is a macro that will copy the range filled in the Processing worksheet, and copy it to the exact same location in the Loan schedule worksheet (The cells with the same fortnight columns and the same member name. This is how the loans are to be filed.
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
What is the proper syntax for working with a Range with to name it after the PasteSpecial command? The Selection approach I am trying here does not seem to work unless I am currently within the same workbook.
[URL]
VB:
Sub Create_Dashboards()
With Sheets("Revenue Model") 'Strat Plan Revenue
.Range("J2:S9").CopyPicture
.Range("A42").PasteSpecial
Selection.Formula = Range("J2:s9").Address
Selection.Name = "Strat Plan"
'more code here
End With
End Sub
I have attached xl sheet for ref.
I have value in E2(5),F2(10)=G2(5[sub of F2-E2])
I need to find E2(5) value in B2:B21 and the same of F2 also
After finding that
(eg): E2 value 5 present in B6 cell and it should come to c6 cell same of F2 also
Now It should select C6 to C11 cells.(ref of B6 to B11,ie,5 to 10)
I tried in vba and formuals but i couldnt find solution.
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedI wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies View Related1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
I got here different vessel name with corresponding vessel code and a amount. I needed to put the amount the to corresponding vessel if it matches the vessel code. Further explanation are in the attach excel file.
View 9 Replies View RelatedPrivate Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim ws As Worksheet
Set ws = Sheets("Sheet2")
irow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
ws.Cells(irow, 1).Value = Target.Value
End Sub
I am using above formula to copy. The problem being faced is that if in any sheet of the workbook is double clicked, the data is copied in sheet 2. Is it possible to amend the formula to make it only a particular sheet(query) specific instead of Workbook.
I have two files and need to copy the information from columns B,C,F,H rows 5 true 29, and past it in the other file in Columns B,D,G,J; rows 3 true 35.
The code that I have works fine, but have one problem - it past the info in the rows starting from 37 instead from row 3. Here is where I need your help. The code is triggered when the condition Arr ( arrived) is chosen in the column AH ( file Delivery Status) and then the specific warehouse is chosen in the column AI. To make it easy I have left only one warehouse as a choice.
Attached you can find sample files ( I have delete the info from the heading cells as it was in another lenguage)
I need a little look on a Copy Paste Code, as bellow:
View 3 Replies View RelatedHTML http://www.excelforum.com/excel-programming/707534-logging-a-xml-feed-copy-the-same-cell-and-paste-into-increasing-cell-positions.html#post2200312
First i need to copy four cells, i can record the macro for this but i need to do it a lot so it would be better if i had the code. i need to copy cells D6, D9, F6 and F9. a description of the code would be really great so i can get an understanding of vba code.
