Set VBA Variable With Index/Match Array
Jan 5, 2010I created an Index/Match array forumula in the worksheet. It works.
View 2 Replies
ADVERTISEMENT
Index Match Array New Formula Not Array?
Nov 6, 2013Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
Offset Index Match Array?
Jun 3, 2014=INDEX('Data Dump'!$C:$C,MATCH('YTD Detailed'!B$2&A40,'Data Dump'!$G:$G&'Data Dump'!$D:$D,0))
I have to above array formula, i am looking to nest an offset within it. That looks up two columns to the right, but im having trouble.
Can an offset be added to an index?
Array/CSE Formula Using INDEX(MATCH())
Jan 26, 2010Imagine 5 periods of sales, growing by $550 per year, from $250 to $2,250. There is a columnar table with sales in increments of $500 to $2,000 paired with margin percentages.
Using INDEX(MarginColumn,MATCH(Sales,SalesColumn,1)) successfully retrieves the correct margin % for each period where Sales is that year's sales.
So, I tried to construct an array formula in the following way:
{=SalesRow*INDEX(MarginColumn,MATCH(Sales,SalesColumn,1))}
Sales is not changing, so that only the 1st year's margin percentage is being applied to each year's sales. I confirmed this by extending the array to a multi-cell layout.
How can I correct the formula so that the margin percentage is looked up as if it were using each year's sales independently? I know I can just SUM the array once this works, but this is my current road block.
P.S. If you see this answer immediately, how might I multiply the percentages by the sales that increase by $500 and sum the whole expression into one cell?
Index Match Array Multiple Criteria?
Jun 22, 2014with a multiple criteria index match array!
I have attached an example where I need to bring back a result matching 4 specific criteria, but I cannot seem to get it to work at all!
I have attached an example dataset with the formula that I was trying to get right (and failing miserably!!)
Find Number In Array That Is Less Than INDEX MATCH?
Jun 25, 2014Cell P14 = 4.7
My array is H42:N72, in H42:H72 I have numbers 15,14,13....0,-1,-2,-3, etc...
In N42:N72 there is a corresponding $ amount that I would like to return based on finding the value which is greater than 4.7 (so, looking to match the $$ amount to the number 5 in column H42:H72)
I've tried using INDEX MATCH but can't figure this out.
Index/Match Function Inside An Array
Jan 20, 2010Solution for all: {=SUMPRODUCT(SUMIF(Sheet1!$A$2:$A$16,$F$34:$F$40,INDEX(Sheet1!$B$2:$K$16,0,MATCH(T$10,Sheet1!$B$1:$K $1,0))),U34:U40)}
Say I have an Excel workbook with two sheets: Employee Hours and Employee Wages. On the Hours sheet I have 31 columns (Jan1 - Jan31) with inputs for the number of hours worked by each employee by day. On the Wages sheet I have listed the same 31 columns with their wages each day (I do this to factor in wage increases that occur fairly often).
My goal is to use an INDEX/MATCH function to calculate the total daily compensation for each day on the Wages sheet by multiplying hours*wages for all employees that day. Here's the code I'm using:
Concatenate Array Value From Cells For INDEX / MATCH?
Aug 2, 2012Why this formula code:
Code:
=INDEX(INDIRECT($A$3&D7&$A$4),MATCH(B7, INDIRECT($A$3&D7&$A$5),0),5)
Where A3 D7 and A4 concatenate to form a workbookname!named range1 and equally A3 D7 and A5 form workbookname!named range2 works perfectly well for a fixed range as named range, but not if the named range is dynamic using the typical OFFSET, COUNTIF method?
I need to be able to concatenate the range reference in this way, but for the named range reference to be a dynamic range that will grow and change with additions etc.
Excel 2010 :: Index Match Using Array?
Sep 13, 2012The context of this problem is that I am pulling sales data from different outlets to analyse monthly sales. The data from the various outlets are in various formats and the products, even though they are the same throughout all the stores, are named differently. For example, Mushroom Soup can be named as "Soup Mushroom", "Mushroom Soup" or "Cream of Mushroom". This makes analysis really tough.
I first created a table with a list (K6:P6) that had the varying names of the products. This is shown as the first table with 3 rows.
Then I tried to match this list to a range of products sold by an outlet e.g. Electric. (shown in the next bigger table $D$10:$D$254, ) Next, I used Index to call up and display the sales of that product next to table with list A ($G$10:$G$254)
This works for some entries but not for all. I get mostly #NA answers even though I do ctrl-shift-enter. Also, the bigger table is in a separate file and I am using excel 2010.
=INDEX('[GON-JUN 2012.xls]gon-jun'!$G$10:$G$254,MATCH(K6:P6,'[GON-JUN 2012.xls]gon-jun'!$D$10:$D$254,0))
[URL]
Alternative To Index And Match Array Formula?
Sep 18, 2012complex formulas in Excel but managed to work out and create the following formula;
{=IFERROR(INDEX('owssvr(1)'!$AE:$AE,MATCH($A9&AK$1,'owssvr(1)'!$C:$C&'owssvr(1)'!$E:$E,0)),"")}
Basically I want to return a call quality score if the name and week match my criteria.
The above formula works perfectly, however, it is very slow and the sheet takes ages to update.
Is there a quicker and more dynamic way to achieve the same result?
Index Match Array For Multiple Cells
Mar 10, 2014How to do INDEX MATCH ARRAYS. (to populate my report I need to match multiple rows and columns from source sheet to import data).
Now I am trying to replicate same in VBA. (for this example row1&2 & column1&2 on both seed(source) and result(one I am trying to populate) sheets).
I wrote the code below that works just fine for 1 CELL.
Sub Button1_Click()
Range("C4").FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(A4&B4,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
End Sub
I know in excel I can simply drag the formula across rows/columns to populate them automatically and the way I would do this in VBA would be by creating loops.
Here is what I have that needs improvement
Sub Button1_Click()
Dim iRow As Integer
For iRow = 3 To 4
Range("C" & iRow).FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(AiRow & iRow,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
Next iRow
End Sub
Here iRow is to identify row number, and to keep simple I am only doing 2 rows. but how do i write MATCH statement to identify rows needed to be matched from SEED sheet?
Index Match Or Array Search Function
Jul 30, 2014Here is the table I am working with
Date
Open
High
Low
Close
Volume
Adj Close
Semi-Annual Yield
Theoretical Bond Price
Index
Coupon
Total Value
Peaks
Troughs
[Code] ..........
The Relevant columns would be "Date" column A cell 1, "Total Value" column L cell 1, "Peaks" column M cell 1, and "Troughs" column N cell 1. What I basically want to do, in the next column, column O, is this: If cell N# = "Trough" find the previous M cell = "Peak" and take the L cell in that "Peak" row and subtract the L cell in the Trough row from it (like =(L4-L9)/L4)). Then in column P, if the percentage drop was 5% or greater, I want to find the days between the trough we are looking at, in cell n10, and the NEXT Peak, cell M11, using the corresponding dates in Column A.
Index / Match Lookup With Variable Indexed Column
Jul 23, 2014I'm trying to perform an index / match lookup that can have a dynamic indexed column.
Sheet1 has the master table and sheet2 is where I'm putting the formula. The table on sheet1 has a RecordID field that uniquely identifies each record and that must be typed into Sheet2 [RecordID] column and then matched to sheet one to identify the record
Code:
MATCH([RecordID],Table1[RecordID],0)
The column headers on Sheet1 are used as data validation for the column [Field] on sheet2. The value of the Field column on sheet two should determine the the column on sheet1 to index.
This is what I have so far:
Code:
=INDEX(MATCH([Field],Sheet1!A:AQ),MATCH([RecordID],Table1[RecordID],0))
Index Match Lookup, Variable Return Column
Sep 3, 2009I would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
How To Ignore Blanks In Index / Match Array Formula
Dec 2, 2013I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
=INDEX(C2:C11,MATCH(MODE(COUNTIF(C2:C11,C3:C11)),COUNTIF(C2:C11,C2:C11),0))
Formula To Return Array To Use In Index / Match Function?
May 8, 2013I need to find a way to find an array in a tab to use for an index/match function I have.
this is what i would normally use: =index(tab_array,match($a2, tab!$a$1:$a$1000,0),match($B$1,tab!$a$1:$zz$1,0))
This formula would usually work fine when I know that within the tab, the array in which the row match is searching doesn't change. However, that array may change in the future, to say column H, without my knowing as it is a database that gets automatically populated from an upstream system.
Is there a way to search for an array within an index/match?
Array Formula - Index And Match With Multiple Statements
Jun 5, 2013I am trying to understand how to use index and match in an array formula. Probably easiest to take a look at my example sheet. For some reason, the first result is working, but the others aren't.
[URL] .....
Alternatively, here is a screenshot.
Uploaded with ImageShack.us
The formula I have tried is: =INDEX($E$3:$E$11,MATCH(1,IF($A$3:$A$11=G3,IF($B$3:$B$11=H3,
IF($C$3:$C$11=I3,IF($D$3:$D$11=MEDIAN(J3,K3,$D$3:$D$11),1,0) ,0),0),0),0))
confirmed with ctrl shift enter.
INDEX MATCH And MIN / SMALL To Pull First And Second Smallest Values From Array
Jan 18, 2014I'm using this formula to lookup data based on the lowest average.
[Code] .....
The problem is that the minimum average is a two way tie, and I need to return both data sets. It just happens to have the same average.
I've tried using SMALL(array,1) and SMALL(array,2) in place of MIN above, but it gives me the same data set. I've also tried resizing using offset.
See attached : sample.xls
Find Three Largest Numbers From A Variable Starting Index Match Point
Sep 1, 2013My data is set out in columns, where alternate columns provide day numbers for given years (we can call these type 1 columns), with adjacent columns containing values which correspond to those type 1 column day numbers (we can call these type 2 columns). There are about a hundred columns in total (50 of each type). I would like to get excel to return the three largest numbers within each type 2 column, but I want to exclude data within the type 2 column above the point which is adjacent to a specific (varying) day number in the type 1 column. The location of this point varies for all the type 1 columns, according to a third row of numbers (the look up start point), which are currently listed below the dataset in every type 1 column. So, for the type 1 column "year 1", I would want Excel to ignore the values 0 and 1, which are listed next to day numbers 78 and 79, and begin looking for the three largest values down the column starting from the value which is adjacent to 81 (which is a 2). In type 1 column "year 2", excel would start looking for the largest values from the cell adjacent to 78, so it would ignore the 18 at the top of the column,and would return 2 and 12. And so on.
Year1
Value
Year2
Value
Year3
[Code]...
look up startpoint
81
78
62
83
Extracting Data Based On Multiple Criteria - Index Match Array?
Jan 2, 2013I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories
Column 2 Lists the Machine
Column 3 Lists the Part
Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
Formulas By Using VLOOKUP, INDEX, MATCH, INDEX&MATCH Separately
Oct 8, 2009I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
Nested Index / Match Array - Return Value In Column C When Matching Column A And B But With Few More Criteria
Jun 7, 2014I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
VLOOKUP / INDEX / MATCH Function: Match Data From 2 Independent Sets??
Oct 8, 2009I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedCounting Number Of Times INDEX / MATCH Finds More Than 1 Match?
May 23, 2014We know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
Index And / Or Match Formula With Multiple Match Required To Return A Value
Jan 21, 2014See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
VLOOKUP / INDEX And MATCH To Return All Values That Match
Feb 4, 2014I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
Using Index / Match Function For Two Column Match Values
Aug 28, 2012Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX / MATCH Multiple Ocurence Match Values
Jul 11, 2008INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedLookup/Index-Match-Match Using Segments
Jun 10, 2009Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies View RelatedMatch Upper Closest Value Using Index-Match
Jan 15, 2013I couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx