I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
=INDEX(C2:C11,MATCH(MODE(COUNTIF(C2:C11,C3:C11)),COUNTIF(C2:C11,C2:C11),0))
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
Imagine 5 periods of sales, growing by $550 per year, from $250 to $2,250. There is a columnar table with sales in increments of $500 to $2,000 paired with margin percentages.
Using INDEX(MarginColumn,MATCH(Sales,SalesColumn,1)) successfully retrieves the correct margin % for each period where Sales is that year's sales.
So, I tried to construct an array formula in the following way:
{=SalesRow*INDEX(MarginColumn,MATCH(Sales,SalesColumn,1))}
Sales is not changing, so that only the 1st year's margin percentage is being applied to each year's sales. I confirmed this by extending the array to a multi-cell layout.
How can I correct the formula so that the margin percentage is looked up as if it were using each year's sales independently? I know I can just SUM the array once this works, but this is my current road block.
P.S. If you see this answer immediately, how might I multiply the percentages by the sales that increase by $500 and sum the whole expression into one cell?
complex formulas in Excel but managed to work out and create the following formula;
{=IFERROR(INDEX('owssvr(1)'!$AE:$AE,MATCH($A9&AK$1,'owssvr(1)'!$C:$C&'owssvr(1)'!$E:$E,0)),"")}
Basically I want to return a call quality score if the name and week match my criteria.
The above formula works perfectly, however, it is very slow and the sheet takes ages to update.
Is there a quicker and more dynamic way to achieve the same result?
I need to find a way to find an array in a tab to use for an index/match function I have.
this is what i would normally use: =index(tab_array,match($a2, tab!$a$1:$a$1000,0),match($B$1,tab!$a$1:$zz$1,0))
This formula would usually work fine when I know that within the tab, the array in which the row match is searching doesn't change. However, that array may change in the future, to say column H, without my knowing as it is a database that gets automatically populated from an upstream system.
Is there a way to search for an array within an index/match?
I am trying to understand how to use index and match in an array formula. Probably easiest to take a look at my example sheet. For some reason, the first result is working, but the others aren't.
[URL] .....
Alternatively, here is a screenshot.
Uploaded with ImageShack.us
The formula I have tried is: =INDEX($E$3:$E$11,MATCH(1,IF($A$3:$A$11=G3,IF($B$3:$B$11=H3,
IF($C$3:$C$11=I3,IF($D$3:$D$11=MEDIAN(J3,K3,$D$3:$D$11),1,0) ,0),0),0),0))
confirmed with ctrl shift enter.
I'm using Index/Match to find a value in another workbook, but there is one value that I want to ignore. For example here is my function --
=INDEX(ZZANALYSIS_PATTERN.xls!$A:$H,MATCH(D8,ZZANALYSIS_PATTERN.xls!$G:$G,0),2)
In D8, the value is Blue. Here is an example with made-up values (X is meaningless values) --
A B C D E F G
X Apple X X X X Blue
X Pie X X X X Blue
When I use the function, I want it to retrieve Pie, but it always retrieves Apple. Is there a way to ignore Apple? I've tried throwing "Apple" in there a couple different ways, but nothing is working. Or, if I can search from the bottom up, that would work as well.
I want to create a validation list with value comming from formula and I got blanks line. I have to create a dynamic list, I can have 15 possibility and it came from a lookup formula. When I choose the 15 cell with the lookup formula it show the empty cell. I did a exemple of my problem. You can check the attachement to understand my problem in the cell C1.
View 2 Replies View Related=INDEX('Data Dump'!$C:$C,MATCH('YTD Detailed'!B$2&A40,'Data Dump'!$G:$G&'Data Dump'!$D:$D,0))
I have to above array formula, i am looking to nest an offset within it. That looks up two columns to the right, but im having trouble.
Can an offset be added to an index?
I created an Index/Match array forumula in the worksheet. It works.
View 2 Replies View RelatedI use the following sum array formula in a range of data, but receive a #VALUE!-error, because of some lines with text. Is it possible to ignore text like this by using IF(ISERROR...) or something else, combined with the array-formula below.
View 5 Replies View Relatedwith a multiple criteria index match array!
I have attached an example where I need to bring back a result matching 4 specific criteria, but I cannot seem to get it to work at all!
I have attached an example dataset with the formula that I was trying to get right (and failing miserably!!)
Cell P14 = 4.7
My array is H42:N72, in H42:H72 I have numbers 15,14,13....0,-1,-2,-3, etc...
In N42:N72 there is a corresponding $ amount that I would like to return based on finding the value which is greater than 4.7 (so, looking to match the $$ amount to the number 5 in column H42:H72)
I've tried using INDEX MATCH but can't figure this out.
Solution for all: {=SUMPRODUCT(SUMIF(Sheet1!$A$2:$A$16,$F$34:$F$40,INDEX(Sheet1!$B$2:$K$16,0,MATCH(T$10,Sheet1!$B$1:$K $1,0))),U34:U40)}
Say I have an Excel workbook with two sheets: Employee Hours and Employee Wages. On the Hours sheet I have 31 columns (Jan1 - Jan31) with inputs for the number of hours worked by each employee by day. On the Wages sheet I have listed the same 31 columns with their wages each day (I do this to factor in wage increases that occur fairly often).
My goal is to use an INDEX/MATCH function to calculate the total daily compensation for each day on the Wages sheet by multiplying hours*wages for all employees that day. Here's the code I'm using:
Why this formula code:
Code:
=INDEX(INDIRECT($A$3&D7&$A$4),MATCH(B7, INDIRECT($A$3&D7&$A$5),0),5)
Where A3 D7 and A4 concatenate to form a workbookname!named range1 and equally A3 D7 and A5 form workbookname!named range2 works perfectly well for a fixed range as named range, but not if the named range is dynamic using the typical OFFSET, COUNTIF method?
I need to be able to concatenate the range reference in this way, but for the named range reference to be a dynamic range that will grow and change with additions etc.
The context of this problem is that I am pulling sales data from different outlets to analyse monthly sales. The data from the various outlets are in various formats and the products, even though they are the same throughout all the stores, are named differently. For example, Mushroom Soup can be named as "Soup Mushroom", "Mushroom Soup" or "Cream of Mushroom". This makes analysis really tough.
I first created a table with a list (K6:P6) that had the varying names of the products. This is shown as the first table with 3 rows.
Then I tried to match this list to a range of products sold by an outlet e.g. Electric. (shown in the next bigger table $D$10:$D$254, ) Next, I used Index to call up and display the sales of that product next to table with list A ($G$10:$G$254)
This works for some entries but not for all. I get mostly #NA answers even though I do ctrl-shift-enter. Also, the bigger table is in a separate file and I am using excel 2010.
=INDEX('[GON-JUN 2012.xls]gon-jun'!$G$10:$G$254,MATCH(K6:P6,'[GON-JUN 2012.xls]gon-jun'!$D$10:$D$254,0))
[URL]
How to do INDEX MATCH ARRAYS. (to populate my report I need to match multiple rows and columns from source sheet to import data).
Now I am trying to replicate same in VBA. (for this example row1&2 & column1&2 on both seed(source) and result(one I am trying to populate) sheets).
I wrote the code below that works just fine for 1 CELL.
Sub Button1_Click()
Range("C4").FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(A4&B4,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
End Sub
I know in excel I can simply drag the formula across rows/columns to populate them automatically and the way I would do this in VBA would be by creating loops.
Here is what I have that needs improvement
Sub Button1_Click()
Dim iRow As Integer
For iRow = 3 To 4
Range("C" & iRow).FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(AiRow & iRow,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
Next iRow
End Sub
Here iRow is to identify row number, and to keep simple I am only doing 2 rows. but how do i write MATCH statement to identify rows needed to be matched from SEED sheet?
Here is the table I am working with
Date
Open
High
Low
Close
Volume
Adj Close
Semi-Annual Yield
Theoretical Bond Price
Index
Coupon
Total Value
Peaks
Troughs
[Code] ..........
The Relevant columns would be "Date" column A cell 1, "Total Value" column L cell 1, "Peaks" column M cell 1, and "Troughs" column N cell 1. What I basically want to do, in the next column, column O, is this: If cell N# = "Trough" find the previous M cell = "Peak" and take the L cell in that "Peak" row and subtract the L cell in the Trough row from it (like =(L4-L9)/L4)). Then in column P, if the percentage drop was 5% or greater, I want to find the days between the trough we are looking at, in cell n10, and the NEXT Peak, cell M11, using the corresponding dates in Column A.
I'm using this formula to lookup data based on the lowest average.
[Code] .....
The problem is that the minimum average is a two way tie, and I need to return both data sets. It just happens to have the same average.
I've tried using SMALL(array,1) and SMALL(array,2) in place of MIN above, but it gives me the same data set. I've also tried resizing using offset.
See attached : sample.xls
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories
Column 2 Lists the Machine
Column 3 Lists the Part
Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
I have a row with numbers
1
2
3
5
6
7
8
What is the formula to get then on another column as
1
2
3
5
6
7
8
I have this array formula
=IF(ROWS(A$11:A13)1,IF(MSB!$A13"",SMALL(ROW(Table1[APP DATE])-ROW(MSB!$A$11)+1,ROWS(A$11:A13)),""))))
the problem is that when both if statements are true i want it to get the row number, this is because table1 has blank rows (can not be avoided as the data is linked from a closed workbook)
i can see this works up until it meets the first blank row and i get #value error.
on table1 data exists on row 1,2,5 and 8 so my problem is getting the small function k to report these numbers?
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedI'd like to concatenate the two columns in the file I've attached as a string of text that I can copy to another sheet. The second column in the file attached will be a vlookup from another sheet. However as shown in the file, I'd like to ignore blank cells and only concatenate if they have data in them.
View 4 Replies View RelatedI'd like to concatenate two columns but ignore blanks.
I've attached the file that I'm working with.
I'd the format to be as shown in the sheet.
I need to perform the following calculation:
=FTEST($A$2:$A$30,$B$2:$B$30)
The problem is that this statistical test needs to have pairs and sometimes the ranges won't all be filled or paired. For example, column A may have 15 rows while column B may have 20. So in this case I would need to only add A2 through A15 and B2 through B15.
Is there any any that can be done?
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I'm trying to do a Data Validation list where there is a range from A1:A10 named List, but there are only values in A1:A5.
For the drop down menu, I've done the Data Validation and List, and made it =List. The problem with that is, I only want the drop down to give the options if there is a value (A1:A5 not all of A1:A10). I thought that the Ignore blanks feature would do that, but it does absolutely nothing.
I've come across a problem using the =SUMIF/COUNTIF function in excel. It incorrectly calculates blank cells as zeros.
=SUMIF(D4:D54,"Solar",T4:T54)/COUNTIF(D4:D54,"Solar")
The correct output should be 100%, but shows as 66.67% because of the blank cells in the column. How do I correct this?