Shift Colors To The Left
Jan 2, 2009I need to change to shift the colors to the left instead of the right.
View 3 Replies
ADVERTISEMENT
VBA To Shift Cells To The Left
Apr 30, 2009how can i get this
Sheet1
ABCDEFGHIJKL7WTXMF31326154RIO TINTOAUDMLWSINBFSALE 258414.13 ML W/S INT BD FD 16-Mar-0917-Mar-09-251307.75N
Delete Cell And Shift Left?
May 28, 2014I want vba code to do the changes
Search for "CAP_ACTV_LN_SEQ" keyword in column A of Sheet1 and when found go two rows down and do the following
Delete cell D128 and E128 ( if more than 1 rows then do the same for all rows till "selected" keyword detected below it eg C131 in this case ) and Shift cells in the right to two column left as shown in figure below -
Before
2.jpg
After
3.jpg
Sheet attached
Data.xlsm
This can happen by click of button in the sheet
Delete Cells Shift Left
Mar 15, 2007I'm trying to do is check each Row and move the last 3 Columns of data in each Row to the left so they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W). Columns A and B are temporary. Column A utilizes the formula "= COUNTA(B2:AG2)" to count the number of cells in the row that contain data. Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data in the active worksheet. Columns A and B will be deleted at the end of the Macro.
The GOAL (END RESULT) is for Columns A through W (and ONLY these Columns) to contain data (keeping in mind that Columns A and B will be deleted at the end). If some rows have Column W (and beyond) blank, then I want to MOVE data from Columns U & V over to V & W and then COPY data from Column T into the [currently] blank Column U.
I've been trying to get the Macro to start in the last row and, using CASE Statements, delete the proper range of cells and SHIFT LEFT as it counts backwards towards the first row. I'm not too sure this is the best approach and could really use some advice from the experts! I can provide a "test" file if necessary ... the test file I've been working with is approximately 6.5MB, but I can delete most of the 14,287 rows and still give a good representation of how the data varies.
Sub b_DeleteCellsShiftLeft()
' DeleteShiftLeft Macro
' Macro recorded 3/14/2007 by George Nicholaou
' Need to assign variable for current row (?)
' r=ROW()
' Columns A and B are temporary
' Column A utilizes the formula "=COUNTA(B2:AG2)" to count the number of cells in
' the row that contain data
' Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data
' in the active worksheet
' They will be deleted at the end of the Macro
' What I want the Macro to do from this point is:
' 1. Check each Row and move the last 3 Columns of data in each Row to the left so
' they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W)
' 2. The GOAL (END/RESULT) is for Columns A through W (and ONLY these Columns)
' to contain data (keep in mind, Columns A and B will be deleted at the end)
' 3. If some rows have Column W blank, then MOVE data from Columns U & V over to V & W............
Insert Column & Shift Left
Sep 14, 2007I wanna shift a particular column (lets say column A) to the left, so I do the following:
hojaFAC.Columns("A:A").Select
Selection.Insert Shift:=xlToLeft
hojaFAC is a worksheet
BUT I get the next error when I execute my macro :
RUNTIME ERROR 1004
Select method of range class failed
Why do I get runtime error nš 1004 all the time also for other reasons. I think itīs the only runtime error I ever jumped into. But If I ever get a runtime error It's allways number 1004.
Delete Empty Cells, And Shift Left
Oct 7, 2008I am trying to find a method for deleting empty cells in a range and shift cells left upon deletion automatically. I could do this manually, but with 3000 rows of data it could be a long task. I have attched a small spreadsheet to show what I am looking for.
View 5 Replies View RelatedShift Cells Left Based On Text Value
Oct 20, 2009I need assistance in shifting cells to left based on three (3) specific text values in column B. There are tons of data and extra lines and stuff but consistently these three (3) text values are consistently not aligned and I simply need to shift entire row 1 space to the left. I can do the long and tedious process of going through them all but is there a macro which I can play that does it instantly...
View 9 Replies View RelatedDeleting Cells Won't Prompt To Shift Row Or Column Up / Down - Left Or Right
Feb 22, 2013I've attached the sheet I'm working with. I need to delete most of column F and shift the rows to the left, but when I delete the cells it doesn't give me a prompt to shift the row, it just deletes the entire column or individual row. I need them to shift, what can I do?
Attached File : Coordinators Test.xlsx
Delete Empty Cells And Shift Remaining Left
Oct 7, 2008I am looking for a method which would delete empty cells in a row, and then shift the remaining data to the left (filling the cells with data). I know that this could be done manually, but I need it completed for 3000 rows! I have attached a simple sheet to show what I'm Looking for.
View 2 Replies View RelatedExcel Pallet Lost Colors (hovering Displays Colors But Visual Clues Are Not Shown)
Jul 7, 2013My pallet lost color-coding - if I hover over each little scare it displays the names for the colors and if I click on them they color the cells with the right colors, but the palette itself lost the visual display of colors except for 8 colors: black, blue, red, magenta, yellow, cyan, and white.
I use color-coding of cells a lot and I find it difficult to work without visual clues. At least the hover-support allows me to get the work done, but with difficulty.
Lookup Wage Calculations (calculate Pay Per Shift Dependant On The Type Of Shift)
Dec 1, 2009I have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column.
For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
Calculate Pay For Shift Work With Different Rates Based On Shift Hours
Apr 11, 2008a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!
examples:
start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333
start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000
start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000
Function prod(st As Date, en As Date) As Double
Dim shour As Integer
Dim smin As Integer
Dim ehour As Integer
Dim emin As Integer
Dim stod As String
Dim etod As String
pday = 8
pnight = 12
shour = Hour(st)
smin = Minute(st) + shour * 60
If (shour >= 8 & shour < 20) Then
stod = "day"
Else
stod = "night"
End If
ehour = Hour(en)
emin = Minute(en) + ehour * 60
If (ehour >= 8 & ehour < 20) Then.................
Excel 2010 :: Shifting Cells Left And Then Up If Left Cell Is Blank?
May 8, 2014I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
Start Shift And An End Shift
Nov 18, 2009I have a Start Shift and an End Shift time,
Start Shift = 2009/11/10 09:27:06 (GMT-6:0)
End Shift Time= 2009/11/10 15:13:03 (GMT-6:0)
eg. Total Time = 5.3 hrs
I would like to take if from this format, and calculate the total time difference. Sometimes the GMT codes may be -5:0 if that means anything. For the cell "Total Time" I only need it to have a decimal format.
Autofill Formula To The Left (fill To The Left)
Feb 5, 2009I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
Find/Left Functions: Grab Everything Left Of The Last Occurrence Of "." In A String
Nov 19, 2009I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
Get More The Colors
Mar 28, 2009Is there a way of getting more colors in Excel than what is shown on the standard pallet.
View 3 Replies View RelatedVBA To Change All Tab Colors?
Dec 8, 2011How to change the color of a single tabe. What I'm trying to do now is reset the tab color for all tabs.
Here is my code:
'REMOVE TAB COLOR
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
With ActiveWorkbook.ActiveSheet.Tab
.ColorIndex = xlNone
.TintAndShade = 0
End With
On Error Resume Next
Next ws
I'm new to using loops so I'm not exactly sure what the above code is doing. When I debug it goes through the steps without any errors but it doesn't actually change the tab colors.
Different Colors In A Listbox
Nov 15, 2007The following code is the code "behind" the run button on my userform. The last section reads in a column ( of numbers and text) into a listbox based on the users choice. Is there any way I can have only certain rows in a different color - based on either if the value in that row is greater than a certain number of if the text in that row is a particular sentence?
Private Sub CommandButton1_Click()
'Dimension all variables
Dim fqc As Long
Dim eptg As Long
Dim newlabel As String
Dim BorC As String
Dim now As Long
Dim secondorthird As String
'Collect User Choices
fqc = TextBox3.Value ' Final Quiz Choice
eptg = TextBox5.Value ' Expected Post Test Grade
BorC = TextBox4.Value ' Is desired grade a B or C
now = TextBox6.Value ' Number Of Weeks after term has started
secondorthird = "second"
If (now = 3) Then secondorthird = "third" .....
Colors Missing
May 4, 2007For some reason colors will not show on any EXcel doc. When I type colored text in a cell, it shows the color until I press enter, then it goes black. Cell fill colors do not show at all.
However when I send the doc to another computer the colors wil show.
Sum Cells By Colors
Mar 26, 2008I am trying to create a Holiday/Absence Sheet that will count up hours of Holidays, absence, business Visits etc etc.
The only way I can think of doing this is by colour and filling the cells with the Number of hours holidays, Absence & Business Visits but to do this I need to create a formula that will sum by colour. I've tried a variety of things and I'm sure this can be done using VBA but it's something I have never used so I am at a loss.
So, what I need is a SUM (A1:A31 if colour= Red) and SUM (A1:A31 if colour= Blue) etc.
I hope this makes sense or one of you geniuses out there can come up with somethign smart that works better than my idea!
Same Colors To Same Data Series
Nov 27, 2013I have a big set of data and I want to create different graphs in different tabs with it.
So Imagine that in Tab 1 I want to do the sales forecast for the next five years for product A for all countries in Europe
Tab 2 would be the same, but for product b
Tab 3 the same, but for product c
So with dynamic tables in each tab I can easily do my graph
The problems is that since values vary per product country A in tab 1 is red, in tab 2 is blue and in tab 3 may not exist.
How can I set up a template so taht I do not have to color code each country in each tab? I.e. I want Spain to be blue in all my graphs in the workbook, Italy red and so on...
Changing Header Colors
Jan 12, 2009When a workbook is opened, (using OnOpen() ), I trying to get two header titles colors (A2, B2) to change from their usual Black to Red to Black to Red and finally back to Back.
I'm battling, especially with the time (1 second) for each change. I'm probably using the wrong approach. Can anyone suggest a sound method to achieve this?
Mark Dates With Colors
Nov 22, 2009i want to know how to mark the cells with color where the starting date is not greater than ending date.
View 4 Replies View RelatedFormat Cells For Different Colors?
Sep 15, 2013How do I go about formatting selected cells for different colors for each different number in the selected cells? If I have numbers scattered about I want the cell to show a different color depending on the number that is inserted. EG: 115=red, 365=blue.
View 2 Replies View RelatedChanging Cell Colors
Apr 3, 2012Trying to format cells b9 through b 24 and cells c9 through c24 to change from white to a light grey color by clicking the mouse button once. so one click white, another click grey. The color grey I need is white, background 1, darker 25% in the autofill field in excel. I have search other forums they all lead to changing the code, I did this already. just copy pasted a code I found but all cells were selected to change a bright green.
View 3 Replies View RelatedChange Colors In A Cell?
Jun 27, 2012I am making some grids which will have a series of numbers in the individual cells. But I can't figure out how to change the colors of the digits. If I change one digit to Red; all the numbers in that cell change to Red. Whereas I would like to have them as Red,Green,Black,Blue,etc.
View 3 Replies View RelatedVBA To Change Cell Colors?
Jun 25, 2013I'm trying to update a workbook with a new look and want to change the cell color based upon what the cell color currently is.
I'm having problems with the code that I created. I just can't seem to get the syntax correct for the code.
For the code below, my Range of A5:D5 is just a test range where each cell should change colors. When completed, my range will be much greater.
Code:
Sub ChangeColors()
Dim Cell As Range
For Each Cell In Range("A5:D5")
[Code]....
Changing Colors In A Calendar Using
Dec 15, 2007I have 2 cells (B2 and C2) with date format, showing dates from a calendar.
FYI, These cells are NOT in my Calendar.
Now, I need to write a formula for my calendar cells to check these two cells (B2 and C2) and change the color of the cells inside my calendar according to the date sindicated inthese two cells (B2 and C2).
I did this with numbers using conditional formating and it works perfect but doing this with dates is giving me a hard time. Is there a way to do this? below is a link to my excel file.
http://www.box.net/shared/si7g77l0b8
Red Yellow Green Colors
Feb 19, 2009I am trying to create a formula that looks at a spreadsheet containing training percentages for employees. I need to look at these percentages and based on the date that the person started I need to look at certain rules. First it needs to look at what has happened more recently , moving to a new department or promotion. Next it needs to use that info to decide which rule to use. Ex. the person started 90 days ago then they are subject to rule A. The training percentage then needs to be looked at to see what rating they have. EX. percentage < 90% but > 75% gives a rating of 1. percentage than 50% gives rating of 2. percentage < than 50% rating of 3. Rule B would contain different criteria. My problem is that I tried nesting IF statements but I need more than 7. When I tried to do this in VBA I couldn't get it to work.
View 9 Replies View Related