I am trying to find a method for deleting empty cells in a range and shift cells left upon deletion automatically. I could do this manually, but with 3000 rows of data it could be a long task. I have attched a small spreadsheet to show what I am looking for.
View 5 RepliesI am looking for a method which would delete empty cells in a row, and then shift the remaining data to the left (filling the cells with data). I know that this could be done manually, but I need it completed for 3000 rows! I have attached a simple sheet to show what I'm Looking for.
View 2 Replies View RelatedI'm trying to do is check each Row and move the last 3 Columns of data in each Row to the left so they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W). Columns A and B are temporary. Column A utilizes the formula "= COUNTA(B2:AG2)" to count the number of cells in the row that contain data. Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data in the active worksheet. Columns A and B will be deleted at the end of the Macro.
The GOAL (END RESULT) is for Columns A through W (and ONLY these Columns) to contain data (keeping in mind that Columns A and B will be deleted at the end). If some rows have Column W (and beyond) blank, then I want to MOVE data from Columns U & V over to V & W and then COPY data from Column T into the [currently] blank Column U.
I've been trying to get the Macro to start in the last row and, using CASE Statements, delete the proper range of cells and SHIFT LEFT as it counts backwards towards the first row. I'm not too sure this is the best approach and could really use some advice from the experts! I can provide a "test" file if necessary ... the test file I've been working with is approximately 6.5MB, but I can delete most of the 14,287 rows and still give a good representation of how the data varies.
Sub b_DeleteCellsShiftLeft()
' DeleteShiftLeft Macro
' Macro recorded 3/14/2007 by George Nicholaou
' Need to assign variable for current row (?)
' r=ROW()
' Columns A and B are temporary
' Column A utilizes the formula "=COUNTA(B2:AG2)" to count the number of cells in
' the row that contain data
' Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data
' in the active worksheet
' They will be deleted at the end of the Macro
' What I want the Macro to do from this point is:
' 1. Check each Row and move the last 3 Columns of data in each Row to the left so
' they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W)
' 2. The GOAL (END/RESULT) is for Columns A through W (and ONLY these Columns)
' to contain data (keep in mind, Columns A and B will be deleted at the end)
' 3. If some rows have Column W blank, then MOVE data from Columns U & V over to V & W............
I want vba code to do the changes
Search for "CAP_ACTV_LN_SEQ" keyword in column A of Sheet1 and when found go two rows down and do the following
Delete cell D128 and E128 ( if more than 1 rows then do the same for all rows till "selected" keyword detected below it eg C131 in this case ) and Shift cells in the right to two column left as shown in figure below -
Before
2.jpg
After
3.jpg
Sheet attached
Data.xlsm
This can happen by click of button in the sheet
how can i get this
Sheet1
ABCDEFGHIJKL7WTXMF31326154RIO TINTOAUDMLWSINBFSALE 258414.13 ML W/S INT BD FD 16-Mar-0917-Mar-09-251307.75N
I need assistance in shifting cells to left based on three (3) specific text values in column B. There are tons of data and extra lines and stuff but consistently these three (3) text values are consistently not aligned and I simply need to shift entire row 1 space to the left. I can do the long and tedious process of going through them all but is there a macro which I can play that does it instantly...
View 9 Replies View RelatedI've attached the sheet I'm working with. I need to delete most of column F and shift the rows to the left, but when I delete the cells it doesn't give me a prompt to shift the row, it just deletes the entire column or individual row. I need them to shift, what can I do?
Attached File : Coordinators Test.xlsx
I have data in cells A1:FM1326 I want to delete all of the cells that say FALSE and shift the remaining cells up.
View 5 Replies View RelatedI have a problem in making a delete function/sub and i'm applying it to a listbox in userform ... i'm trying to delete a row of data in the listbox which refers to cells (A12:D12) ... and at the same row (row=12), there are other data cells (E12:H12) ... after deleting the cells all other data below the deleted cells will shift up taking over the deleted cells ...
View 9 Replies View RelatedI am trying to count the # of empty cells to the left. I trying to work out how many days since an employee has missed. In this worksheet, a letter is placed in the cell corresponding to the day they missed. And I need to count backwards from a date (say: July 31st) to the last day with a letter in it.
View 13 Replies View RelatedI am trying to delete a group of four cells and have the remaining block shift up. My code is below and crashes on the red. What is the right code to get this to work?
Code:
Do
ActiveCell.Offset(1, 0).Select
If ActiveCell.Value = Range("G1").Value Then
Range(ActiveCell:ActiveCell.Resize(0, 3)).Delete Shift:=xlUp
Exit Do
End If
Loop
I am looking for a macro that can delete whole rows (shift cells up then). How i would like it to perform is if there is nothing in cell(s) B then delete the whole row?
View 9 Replies View RelatedI am trying to create a macro that will add and delete individual cells depending on an IF statement. The code that I created deletes/adds cells regardless of the IF statement.
If Sheet1.Range("F3").Value = Sheet1.Range("G2").Value Then
Range("G2").Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End
ElseIf Sheet1.Range("F3").Value = Sheet1.Range("G4").Value Then
Range("G3").Delete Shift:=xlUp
End
End If
Also, what is the easiest way to have this code apply to all rows within column F, while adjusting the corresponding cells referenced in column G? The last row within the spreadsheet changes.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a spread sheet that has RX codes as field headers and ones or zeros as values. I want to find all cells which contain "0" and delete those cells while shifting the remaining cells left. The range of cells is aj1:dr17365 and the sheet name is "May 07 Rx HCCs"
View 8 Replies View RelatedI need to change to shift the colors to the left instead of the right.
View 3 Replies View RelatedI wanna shift a particular column (lets say column A) to the left, so I do the following:
hojaFAC.Columns("A:A").Select
Selection.Insert Shift:=xlToLeft
hojaFAC is a worksheet
BUT I get the next error when I execute my macro :
RUNTIME ERROR 1004
Select method of range class failed
Why do I get runtime error nš 1004 all the time also for other reasons. I think itīs the only runtime error I ever jumped into. But If I ever get a runtime error It's allways number 1004.
I need a macro which will manipulate my data like this:
If a blank cell is found in column C, then I'd like to have the contents of that row in column D shifted to the right.
There are 5 worksheets in a workbook one (Names) has 10 columns,
200 rows, I need to eliminate all blanc cells on this worksheet,
to make a list.
I don't want delete entire row,
only the empty cells in each column.
All rows have data but in different columns.
I am trying to delete/select empty cells in Column C.
I tested the code in my work sheet which has close to a million rows. this code for some reason doesnt work. its selecting empty cells from Cell C, that is not working.
When I test it on a new worksheet it worked fine. ?
I have this table and I want to delete all the table rows that are empty. The problem comes in when I am trying to delete the "Table Row" and not the excel entire row. There is data next to my table and I don't wanna mess it up.
This is the code I managed to put togeter
Code:
Sub Delete_Empty_Rows_Table()
Dim i As Variant
Dim varWorkbook As Workbook
For Each i In varWorkbook
Set i = ListObjects.ListRows.Count
[code].....
I've been looking for a couple of hours to try and find VBA to delete entire row if that row contains cells that are empty.
View 5 Replies View RelatedI am using the code below in an effort to copy two columns from Worksheet1 ("S:S","T:T") to Worksheet3 ("A:A","B:B"), delete the empty cells and then find the difference between the two values for each row("C:C"). I do not want to create a new column in Worksheet1. The code worked great before adding the SpecialCells code but was slow since it had to also process the blank cells. I am trying to speed it up. The code has an error on line five and I cannot seem to figure out why.
Sub TempDiffok()
Dim wsNew As Worksheet
Set wsNew = Worksheets.Add(After:=Sheets(Sheets.Count))
Sheets("Sheet1").Range("S:S").Copy Destination:=wsNew.Range("A:A")
Sheets("Sheet3").Range("A:A").Select.SpecialCells(xlCellTypeBlanks).Delete Shift:=xlUp
Sheets("Sheet1").Range("T:T").Copy Destination:=Sheets("Sheet3").Range("B:B")
Sheets("Sheet3").Range("B:B").Select.SpecialCells(xlCellTypeBlanks).Delete Shift:=xlUp
Sheets("Sheet3").Range("C2").Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=RC[-2]-RC[-1]"
Selection.Copy
Columns("C:C").Select.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
True, Transpose:=False
End Sub
The last two lines are from the previous version before adding the ability to delete rows prior to the calculation.
I have a worksheet with data in column A. However, there will always be blank cells throughout this column. I am looking for code that will delete the blank cells (so to speak) and move the below cell with data up one or however many blank cells precede it, hence deleted the blank cell. End result, column A will have no empty cells. The data contained within the cells will be both numerical and text.
View 3 Replies View RelatedI am working with a worksheet that has has 26 columns and about 2000 rows. However, somehow Excel has added tens of thousands of rows and columns to it, all of them empty. I know this is causing some memory trouble but I can't find an easy way to get rid of them. At one point I fixed the problem by selecting the cells I was using and starting a new worksheet, but I don't want to have to do that every day.
View 4 Replies View Relatedim having a little trouble writing a macro to :
check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'
I am looking for something that will first delete all empty columns up until it runs into data, then delete all rows that are blank in Column A until it runs into data.
In other words, I recieve different spreadsheets that start their data in different locations and I would like to have them always start in cell A1.
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
How would write a macro that would delete a row and shift up if they have a value in Column A?
View 6 Replies View Related