Show Cell That Has The Date Selected On Calendar
I've got a calendar form that populates the active cell with the date i select on the calendar. However, would it be possible for the calendar to show the cell that already has a date in it?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Calendar Control 11: Selected On The Calendar Is Greater Than 12 The Date Is Entered Correctly Onto The Sheet
I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet. Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial. If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
View Replies!
View Related
Pass Calendar Control Date To Selected TextBox On Another UserForm
I have a workbook that has multiple spreadsheets. Data is added to the spreadsheets using userforms for each spreadsheet. I have created a pop-up calendar to add dates and want to know if there is a way to add dates without having to create multiple calendars for each txt field on each userform. I would like it so that when I click on the calendar it would put the date into the text field it was launched from. This is the code in the calendar which only puts the date into the field named Dat_Clsd. Private Sub CMD_Close_Click() .....
View Replies!
View Related
Show Comments Next To Selected Cell
I have a spreadsheet with several comments with pictures on cells. I want them to show up when you select the cell, instead of having to put your mouse cursor on it. I found this code, but then it shows the comment on the middle of the spreadsheet. I want the comments to show next to the selected cell.
View Replies!
View Related
Excel 2007 Calendar Control - Select Date From Calendar In A Field
Using Excel 2007 Calendar Control: I want to select a date of choice from a calendar in a field within an Excel spreadsheet. I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet. This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date. Developer Insert More Controls Calendar Control 12.0
View Replies!
View Related
Insert Date In Cell Via Calendar
Kind of like what they do in airline booking web sites, where you have the option "show calendar" and you select the date from there, to avoid any possible typing mistakes. When you select the cell, a calendar or a date drop-down list should pop-up.
View Replies!
View Related
Non-Continuous Range In Event Code: Show A UserForm When A Cell In 1 Of 31 Named Ranges Is Selected
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected. Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Count > 1 Then Exit Sub Dim i As Long For i = 1 To 31 If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
View Replies!
View Related
Auto Creating A Calendar Based On A Date In A Cell.
I am playing around with creating a calendar based on a date (month) I enter into a cell. I am doing this with a simple =date+1. I have a sample attached. Only problem I am having is that for months with 30 days I don't want the last day to show the first of the next month. But I can't simply remove that as if I entered a month with 31 days I would need it to show the 31st.
View Replies!
View Related
Calendar To Allow The User To Select A Date And Automatically Put That In A Specific Cell
I have created a user form using the addins that come with excel to create a calendar that will allow the user to select a date and automatically put that in a specific cell. My system is office 2000. The code is as follows: Private Sub OK_Click() Dim i As Integer Dim myCell As Range i = 0 For Each myCell In Selection myCell.Value = Calendar1.Value + i i = i + 1 Next myCell Unload Me End Sub Now, I gave it to my boss who has xp, and I get the following VB error when she chooses a date and clicks on the ok button: Method 'Value' of object 'ICalendar' Failed
View Replies!
View Related
VBA Calendar Control Does Not Show Day Numbers
Over in the following thread [url] you can see we've hit a problem with the Calendar Control object. I submitted a workbook which has an Activex calendar control embedded on a User Form. On my PC everything appears as you'd expect, with the calendar showing the individual days in the calendar matrix. However when the user loads the form on their system, although they see the calendar as you'd expect, and they can change the month & year at the top of the calendar, they don't see the individual day numbers, 1,2,3 etc. within the body of the calendar.
View Replies!
View Related
Vb, Form Calendar Date - Set To Todays Date
Im designed a form in excel, which has a calendar date picker to select a desired delivery date for the user, which makes it easier to use for the user, than using a text box. Ive searched a number of websites and so far havent seen what I need. I want the calendar, once my form has been opened, to automatically change to the current date. So in summary, the code, I believe would look something like this:
View Replies!
View Related
Show Day In Date Within Cell
Is there any way of configuring Excel so that it will automatically show the day when I hover my cursor over a cell that contains a date, eg 09/10/06 will show Monday as a pop-up similar to a comments box when the cursor is held over it.
View Replies!
View Related
Show Month Of Date Added In Cell
In one cell the user has to fill in a date, example 20.3.2008 and then in another cell he/she has to choose a month from a list (january-december). I need a macro that checks that the month stated in the date cell is the same as the month selected in the other list cell.
View Replies!
View Related
Show Gridlines Only In Selected Cells
Is it possible to show gridlines in some cells and hide gridlines in others on the same worksheet? Is it also possible to isolate a row or column and change the size of selected cells without changing the size of the cells in other rows and columns?
View Replies!
View Related
Show Date/time Of When Cell/column Was Last Edited?
I have columns in my spreadsheet that will be getting updated periodically with a number. 1 week it might be 24, the next it might be 26.... and they would go in January's price, February's price.... The problem is, if a price is entered into the column, we don't know when it was entered other than the fact that it was entered in that month. Is there a way to show the date and time of when a number gets entered or edited in a cell? This date/time could perhaps show up in a column right next to it.
View Replies!
View Related
Show Current Date In The Cell,but Tomorrow- No Change
I have a little problem (but for me is like a break); I want, when I change some in a cell, in the other cell, show me current date. I try with "today()", but , next day when I open that workbook, in that cell, show me the date coresponding with the next day (normaly). How ,I can rezolve this? I want to blocked that cell, only view, but no acces for change enithing.
View Replies!
View Related
Double Click In Cell To Show Current Date And Time
I would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View Replies!
View Related
Formula To Show A Date Range Based On The Amount Shown In Another Cell
Attached is a excel file that has a working formula for tracking cashier variances. I edited out names etc. I added a new cell called Track Back on the employee search sheet. What I want to do is only show variances for the amount of days back selected in the Track Back cell. For example if I select the last 30 days, only the last 30 days would show up below in the sheet. I am not sure if this is even possible based on the forumla that is already on the sheet. I couldn't figure out a way of doing it. But there are a lot of people on here much better with excel than me
View Replies!
View Related
Elseif Statement In Vba: If The Selected Cell Falls Between 1/01/06 And 31/01/06 Then Jan Would Be Selected
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months. Sub test() Dim SelectDate As Range Set SelectDate = Range("SelectedDate") If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _ "Jan" ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _ "Feb"........................
View Replies!
View Related
Calendar Date In Textbox
I have a form where i need to enter date in a textbox from a calendar. I have created a calendar which opens on clicking a button adjuscent to the textbox. Now I am not able to enter the selected date from the calendar into the textbox.
View Replies!
View Related
VB Calendar, If Date Not Within 12 Weeks, Then Msgpop Up
I can get the calendar control to come up and the value selected on the calendar to show up in a certain cell. If a user selects a date that is not within a certain 12 week range, I want a message to appear ("date not within 12 week program"), and the user can't select the date. I am storing nutrition data from a certain date the user chooses and it is a 12 week program from the start date. I want to retrieve info from those 12 weeks but do not want them to be able to select data outside the 12 weeks.
View Replies!
View Related
Default Date In Userform Calendar
In the attached file I have put together a userform that contains a drop down calendar in order for users to select relevant dates. I have two questions: 1 - I've noticed that from creating the userform (04/01/10) the date has remained as this and not updated to the "current date". Is there any way this could be achieved? 2 - Is there any way the code etc. could be manipulated to alter the dates in the Date Entry boxes, based on that entered into the "Rostered Start Date" box. I.e. If a user was to select 09/12/09 in the "Rostered Start Date" box, the other date boxes would automatically change to that date.
View Replies!
View Related
Formatting Date With Pop Up Calendar
I have a userform that has a date entry in it, the date can be entered in two ways either by entering the date into a textbox or via a popup calendar and the selection is then placed into the textbox, the problem I have is that if any date say 1st october 2009 is selected as a DD/MM/YYYY format the data sheet that it is going into is formatting it as MM/DD/YYYY, but it doesn't happen if the day is over 12, so the 13th october would show as 13/10/2009.
View Replies!
View Related
Pivot Table And Calendar Date
I have a pivot table which contains dates in the drop down list. I wanted user to pick dates from calendar control tool rather than pivot table dropdown list. I put the following code; Private Sub Calendar1_Click() If Weekday(Calendar1.Value, vbMonday) < 6 Then Range("B3").Value = Format(Calendar1.Value, "dd/mm/yyyy") End If End Sub it works for most of the dates but not all. Also it does not recognise the dates in the new month.
View Replies!
View Related
Highlight Todays Date In An Excel Calendar
I have a calendar in excel that looks like this: January 20091234567891011February 200912345678 etc. for all days of the month, and all months of the year. (The gold coloured cells are part of a formula I have somewhere else - no need to worry about them) I was wondering - is there a way to get it so that whatever todays date is, the calendar will highlight the column a specific colour (e.g.) if the date was the 5th January, it would look like this: January 20091234567891011February 200912345678 (Although not nescessarily that specific (and frankly pretty horrible) shade of green). I have a list of all the HTML codes, palette numbers and hex codes for all the excel colours. I'm using Excel 2003.
View Replies!
View Related
Once The Date Is Choosen To Be Marked Somehow On A Calendar In The Same Workbook
I am trying to build a user form where people are filling in their holiday requests. I need once the date is choosen to be marked somehow on a calendar in the same workbook. Besides the date, I need in this form, people to upload a file "Holiday Request" which, after the submission of the report to be sent to a specific email, and to be stored as Object in another sheet against the name of the person who is submitting it.
View Replies!
View Related
Inserting VBA Calendar And Allows Me To Choose The Date
I created a calendar and made it so when I click on a cell, it pops up and allows me to choose the date. When I choose the date and press okay, it is supposed to put that date in the cell. I created the spreadsheet a while back and remember it working. Now however, it doesn't and I can't figure out how. When I made the calendar, I followed some help posted on here and copied the VBA from their calendar since I don't really know VBA at all. Here is the worksheet. It should have the calendar already created via VBA. I just need to know how to have the popup calendar to place the date selected in E5.
View Replies!
View Related
Determine If Calendar Control Date Is Between 2 Dates
I have a user form that has a calendar button. Once clicked it updates a txtbox on my user form. What I would also like is for another txtbox (txtQtrLeave) to be auto populated based on this entry. Below is the code I've tried: If CalendarEnd.Calendar1.Value > #3/31/2008# And CalendarEnd.Calendar1.Value < #1/6/2008# Then Qtr = 1 frmAddClient.txtQtrLeave.Value = Qtr ... Qtr 2, 3 etc It seems to return a value if I have one criteria but it doesn't work once I add the And element. What am I doing wrong (this has been driving me mad all morning)?
View Replies!
View Related
Userform Which Allows User To Select A Date Form The Calendar
I have a userform which allows user to selected a date formt he calendar. In my code I name the value selected myDate. I want to have a line of code at the begginning of my code that checks if myDate = a date already listed in column H on a sheet named "all dor's". if it does match then a msgbox appear saying "date already entered" and the code return to the opened userform.
View Replies!
View Related
Set Date Through Calendar In The Userform Text Boxes
I have a userform and a calendar form, on the user form I have three text boxes named (txt1, txt2, txt3) and three buttons named (cmd1, cmd2, cmd3). PROBLEM: when I click I cmd1 button the calendar form opens and after selecting the Date from calendar, the value of the calendar assign in txt1. the same for cmd2, cmd3
View Replies!
View Related
Calculating Totals From A Date Range On A Rolling Calendar Year?
I have a spreadsheet that tracks “points” for hourly associates on a daily basis that totals weekly and monthly. This spreadsheet works on a rolling calendar year instead of a fiscal and I need to be able to capture the totals for periods of time by days. For example, I would need to view how many points ‘employee x’ has from 2/25/09 through 2/25/10. I have attached the spreadsheet, which includes tabs for each week ending and a summary page.
View Replies!
View Related
Bill Payment Calendar Should All Be Automatically Calculated Under The “Date” Column
When a date is entered e.g 1/27/2007 The bill payment dates should all be automatically calculated under the “Date” column. Rules for the date Rule1. e.g. 1 Month—the date should be 1 month after the date entered (as shown by the simple example 1/27/2007 one month is 2/27/2007 in the sheet) Rule2 if the date entered is the last day of the month, the calculated date should also be the last day of the month provided it is a working day. E.g 1/31/2007 one month is 2/28/2007. (provided 2/28 is working day) 2/28/2007 one month is 4/30/2007 (provided 4/30 is working day) Rule3 If the calculated date based on rule1 and rule2 is a non-working day, the date is pushed back by 1 till it becomes a working day. e.g 1/27/2007 two month is 3/27/2007 if 3/27/2007 is Saturday it becomes 3/28/2007 which is a Sunday, another non-working day. So the output should be 3/29/2007 Rule4, under rule3, the date cannot be pushed to the next month. Instead, we push the date forward. In the previous example assume 3/29, 3/30 and 3/31 are all public holidays, by rule3, it will be finally pushed to 4/1. But this becomes another month. So we push forward instead to 3/26 which is Friday. The output is 3/26/2007 Definition of working dates (Monday to Friday excluding the holidays listed in the sheet).........
View Replies!
View Related
|
TRACKER
