Is it possible to hide the contents of a column that would only show once clicked on?
That way i could have a column called "Keywords - click to open" & the contents would only show once clicked on?
I have uploaded an example excel spreadsheet : example show hide.xls
if it is possible to hide the contents of a column that would only show once clicked on?
That way i could have a column called "Keywords - click to open" & the contents would only show once clicked on?
I found this code for a button, so I can collapse and expand a set number of rows within that sheet. It works exactly the way i want it to, however, now I have a second sheet in my workbook, and I used the same button. Problem here is that when I activate the button, it opens the same rows in EVERY sheet in the workbook. "For each ws in Worksheets" so my question is what is the term for it to only work on a certain worksheet?
Code:
Private Sub ToggleButton1_Change()Application.ScreenUpdating = False
Dim ws As Worksheet
With ToggleButton1
If ToggleButton1.Value = True Then
For Each ws In Worksheets
[Code] ........
Other questions is about the ability to send an MS Outlook email from inside of excel.
I've been trying to find something that does the following:
Click button, Form pops up, has drop downs to select recipient, has field for subject, has field for message body, sends email.
I'm trying to create a macro that will hide all the rows where the value in column E is equal to zero.
I'm currently using rows 1:700, but I may add to it.
I have a spreadsheet that has been set up with totals at row 1010. The data that the spreadsheet contains only goes up to row 159. However data will continue to be added row by row over time. At the moment I have to keep hiding and unhiding rows to check the totals. Is there a way so that the spreadsheet will automatically hide all but five rows between the last row with any data in and the totals at the bottom of the spreadsheet?
View 9 Replies View RelatedI have a worksheet with 4 sections of rows. Each section I call Goal 1 - Goal 4. I want to show each section and hide the other sections by clicking on a button. I have used a column, P, to denote which Goal a row belongs to by entering 1, 2, 3 or 4 accordingly. This is the code I am using.
Private Sub ToggleButton1_Click()
With ToggleButton1
.Caption = "Goal 1"
End With
Dim rCell As Range
If ToggleButton1.Value = True Then
For Each rCell In Range("P2:P99")
rCell.EntireRow.Hidden = rCell > 1
Next rCell
3) Else
Range("P2:P99").EntireRow.Hidden = False
End If
End Sub
I have three questions -
1) This code works to show Goal 1 and by changing the >1 value to <4 I can make it work for Goal 4 - but I can't work out how to show the other Goals, 2 and 3.
2) Is this code an efficient way of doing what I want?
3) How can I make the "up/down" state of the toggle button actually relate to whether or not I am showing a particular goal? That is, if I click Goal 1 and then click Goal 4, I am showing Goal 4 but both buttons stay in the "down" state. I want the Goal 1 button to automatically return to it's "up" state when I click on another button.
I have a lengthy column containing text information. Within this column are various gaps. ie: several cells with no information.
eg:
..... Row F
1...text info
2...text info
3
4
5...text info
6...text info
7
8...text info
I would like to create a simple macro (switched via toggle switch) whereby it hides/unhides the rows containing cells with no text information.
It should also be mentioned that this column contains various background color formatting, for both empty and text cells.
When I call a series of subroutines from different worksheets, ScreenUpdating = False is not working.Here is my
Private Sub Worksheet_Change(ByVal Target As Range)
With Application
.Calculation = xlManual
.EnableEvents = False
End With
If ActiveCell = "No" Then
Call Sheet3.DisableTBs
Call Sheet4.DisableTBs
Call Sheet5.DisableTBs
Call Sheet6.DisableTBs
Call Sheet8.DisableTBs
Call Sheet9.DisableTBs
Call Sheet10.DisableTBs......................
I have two sheets say:
Sheet1
Sheet2
Sheet1 has a few comboboxes saying (YES / NO) conditions Which are assigned to particular cells (for Ex: say Combobox1 value assignes to Sheet1!B5 )
If Sheet!B5 = YES some rows in Sheet2 Say ( Row12 ,Row 15,Row 16) has to be hide.
I will add a command button to sheet1 and call macro if i click command button checking the conditions in sheet1 combo boxes..rows in sheets2 has to hide..
Trying to have A1 in Sheet1 having three values 1,2,3 if A1 = 1 hide rows from 1:5 and 10:1500 in three Sheets2,3,4
View 8 Replies View RelatedI have a spread sheet in which some rows are grouped.
So I can see the + (or -) buttons on the side, and the 1 and 2 buttons on the top, to hide or show the separate grouped rows.
Now, depending on the value of a certain cell, I either want to show or hide the grouped rows.
So actually I want to control the +/- and 1/2 buttons indirectly.
Is this possible? Or should I do this by hiding rows instead of grouping them?
Getting a macro to work. I've looked through the forums pretty extensively but ad I'm not too hot with the old vba, I haven't been able to get it working.
I have two worksheets in the same workbook. The first worksheet, let's call it Input, is one for data entry; and the second one, let's call in Output, is formatted for printing.
There are 8 drop down boxes from a data validation list, that when a particular option or three are selected, I need the Output worksheet to unhide only the rows associated with those options.
In trying to get this all to work, I'd added a function in the cell to the left of each option in the Output page that will show the text "show" when that option is selected on the Input page, or the text "hide" if not selected.
I think I could do this with some time with a clunky and long macro, but would prefer to us some kind of "for each" option to hide rows that have "hide" shown in column A, as I'm looking at a range of 100~ cells.
I have a seating plan for my students that has all sorts of data in it and I want to hide certain rows from students. However, they are not all in a group, they are spread out. So for example I have row 3 with student name, row 4 with their target grade, row 5 with their current grade, then row 6 is another student with data on 7 and 8. After that I might have a gap and then the next student on row 10 with data on 11 and 12. I want to toggle on and off the data and leave the student seats. I'm thinking that Subtotals would be the best way, but not sure how to implement it. Do I put row headings on the side? Also I haven't used subtotals since Excel 2003.
View 1 Replies View RelatedI wrote a small code to hide some columns if a certain cell is equal to a certain string.
The cell is actually a drop down list and when they select a certain one, I want it to hide 2 columns. So I wrote the code with sub name Action, but I want it to be running all the time. I tried to achieve this by writing the following code however it gave me error 438 for my 2nd line.
Sub Auto_Open()
Range("A1").OnEntry = "Action"
End Sub
Auto Merged Post Until 24 Hrs Passes;Oh, by the way error 438 states: Object doesn't support this property or method
First, I realize there are plenty of hide cells threads but I have yet to find one pertaining to my situation and I apologize in advance if I this solution has already been posted.
The Problem: I am looking for macro code to a toggle button that will hide various rows that have no value between multiple sets of rows. The toggle should refresh the format of the rows as the information that was blank could later on have value.
The Setup: For each set of rows, the first row will have the label T and the last will have the label S. In between T and S there can be data. If the cells between T and S are all empty then the rows including T and S should be hidden other wise only the non blank cells between T and S should be visible.
The Reason: I have a master database worksheet, there are four copies of the master database worksheet each entitled phase1, ""2, ""3, & ""4 respectively. These phase sheets are linked to the master sheet and show the entire row's data based upon the beginning cell of each row showing either phase1, ""2, & so on.. The data is broken up into many sub databases and traditional auto filters or advanced auto filters will not be applicable as the title of the data and the empty rows in between need to be hidden if the data is empty.
What i would like to do is Hide Rows Based on Cell Value in Multiple Sheets & Multiple Columns
and i need the macro to be fast
Sheet1
If the value in Range BE11:BE160 equals 1 dont hide the row
If the value is 0 or then hide the row
Sheet2
If the value in Range BE11:BE160 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet3
If the value in Range BE11:BE160 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet4
If the value in Range O1:O150 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet4
If the value in Range B1:B150 equals 1 dont hide the row
if the value is 0 or then hide the row
I am trying to hide/show entire rows of a range based on the conditional formatting in the row. I want all rows with at least one overdue training cell (indicated by a red cell) displayed, and rows with no overdue training hidden. The conditional formatting formulas vary greatly, but always result in a white (unchanged), yellow, or red cell. Here is a sample picture for reference:
[url]
The CF formulas vary based mostly on two major factors: the frequency of the requirement found in Column "C" (Monthly, Quarterly, Semi-Annual, or Annual Requirement), and the personnel's arrival on site or date of departure (wheels up) found in Rows("3:4"). Each training class has two rows. The first row indicates the last time the class was completed, and the second row shows when it is due next. Both rows have to be displayed/hidden based on the second row's conditional formatting. Here is the code I am using right now: ...
Looking for a way to hide a given area of either rows or columns using a hide/unhide button command.
View 9 Replies View RelatedI want to be able to have a set of buttons or a dropdown menu where i can put all the titles of my columns in.
After clicking on one of the titles the column must hide or show itself, is there a way to do this?
It's for an automated sheet wich contains a lot of information and this will be used by a lot of people, i want to make it easy for people to simply generate a sheet with just the info they need.
I have some rows in my sheet locked and some unlocked rows. When user clicks on a unlocked row I should be able to enter some information. I am suppose to populate some dropdowns in that row for him to choose. How can this be done??
I know when a user clicks a row worksheet change event is call. I can write a function in the worksheet change event to populate values in the dropdown. I went through some articles, and they say it can be done by hiding and unhiding rows.
I have multiple check box (activex control). When click to first check box second should appear and linked to corresponding cell in column K. I did that manually
Is here the way to do tah using more complex
Below are the codes to hide the objects within Excel, Disable Keyboard shortcuts and disable right click, all are placed in the ThisWorkbook and i placed them in a 'Private Sub Workbook_Open()' function.
VB:
'Change 'False' to 'True' to unhide
ActiveWindow.DisplayGridlines = False
ActiveWindow.DisplayHeadings = False
[Code]....
There maybe simpler ways to do the above i just don't know them, it's just these have worked for me and i have had zero bugs come back from them!
I have created a drop down list but notice that the button (the arrow in the square) does not show up unless I click on the cell. Is there a way to show the button at all times so the user knows a drop down list is available?
View 9 Replies View RelatedI would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View 7 Replies View RelatedI have an excel 2003 sheet that collects data from Infopath forms. The forms are to record students who have broken school rules, when, where, repercussions etc. One column shows their class and there is a separate column for each rule broken.
I want to create another sheet to show each class down the rows and the columns to show each school rule. Therefore, each cell would show the number of each particular rule broken for each particular class. I have tried to do countif and sumproduct (if on sheet 1, column B the class is KA and on sheet 1, column M, the rule is bullying = how many times this has occurred).
I have a macro in which i can enter the rows i want to hide.
If i want to hide "position 32" i have to enter the number 8 of the row. This works fine. But now if i want to hide the "position 32" from Sheet1 it also should hide the rows 4-8 from Sheet2 [Data with 32].
Or if i hide "position 34" in Sheet1 [row 10] it also should hide the rows 14-18 in Sheet2.
Sub Button294_Click()
If Sheet1.Range("A34:A94") = "HIDE" Then
For Each cell In Range("A27:A94")
If UCase(cell.Value) = "HIDE" Then
cell.EntireRow.Hidden = True
End If
End Sub
get my code to work.
I have a sheet with a dropdown box in cell "J1" which is meant as a 'Show only rows containing this value'.
Column Q, from row 3 downward has a pick box which lists the same values as the "J1" drop down box, but uses code to combine whats chosen with commas. An example of what is in a cell in column Q is "SeaHawk, BlackHawk, Squirrel, MRH", where cell J1 would be either "SeaHawk" or "MRH" or something completely different.
I need to only show rows, with text in column Q containing the smae text as J1.
My Excel>Preferences>View>Comments is set to Comment Indicator Only.
Working from keyboard and mouse, when I click on a cell holding a comment ($B$52) , the comment appears. When I click on a different cell the comment disappears.
When I run the code
...
Range("B52").Select
End Sub
the cell is selected, but no comment appears.
When I run
...
With Range("B52")
.Select
.Comment.Visible = True
End With
End Sub
the comment remains visible even after I click off of B52.
I get the same behaviour when I use Application.Goto rather than Select.
I would like to write a routine that
1) creates a comment for cell B52
2) selects B52
3) shows the comment in B52
< VB routine ends >
4) comment disappears when user clicks on different cell.
Does this require event code?
I have two options in a Cell as Applicable and Not Applicable. This is in a Drop-down menu and what I want is that when I choose Applicable, it should bring up additional 5 or 6 cells for me to complete. And if I choose Not Applicable, the additional cells should not show up. The default would be Not Applicable.
