I am trying to sort a long range of text that is placed horizontally in a spreadsheet. I can do it vertically with the sort function in Excel but it does not seem to work for text that is placed horizontally. Example is as below:
Inventory Accounts Human Resources
Using DataEntry sheet for data.
Trying to rearrange the data to DataFormatedProperly sheet.
So far all I can accomplish is DataFormatedWrong sheet.
Edit: Not sure what happened but file was NOT understandable before. It should be correct now.
I would like to sort columns B and C (keeping the two lined up together) so that A and B match up numerically.
View 3 Replies View RelatedI have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
As of right now these are the steps i do to sort...i click custom sort choose My data has headers and then i select from the drop down list the word FRNAME.
is there any way i can setup a macro to do this for me? i tried recording the macro but it just is recording me choosing the column FRNAME is in. This does not work for me since FRNAME end up being in different columns all the time but will always be in row 1.
I would like to ask if it is possible to sort a range of row? What I mean is, if I sort like Row 1, the entire block of row 1 will move as well? Like if i have column A to F, then row 1 of column A to F will move together at the same time.
View 3 Replies View RelatedI am looking for a macro to sort my colums in ascending order the range i need sorted is from A7:F107, it will be sorted with the numbers in the A column ie 1 - 107. sometimes different numbers get added and it has to be sorted in number sequence.
If possible i would also like a macro to protect this range after the sort,
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I have an Overview sheet within my workbook that contains info from all other sheets.
What I want to do is when you click on the Sort button in the General sheet it will activate the Overview Sheet and
- first off sort all sheets starting with AJ together, then all sheets starting with CJ together and then all sheets starting with PJ
- then the next thing i want it to do is sort all Ajs by their start dates, sort all CJs by their start dates and the same for all PJs.
Now up until now I was keeping all sheets that began with AJs together in the workbook and so on so I was able to use the following sort function
Sub Overview_sorting() ...
I am using a formula but when it sorts with the data in the adjacent cells it does not update the reference cells properly.
For example here is the =SUMPRODUCT(($F$12:$WWX$12>=C1)*1,($F$12:$WWX$12<=E1)*1,ABS($F$13:$ZZ$13))
This code is located on row 13, when I do a sort function with all the data, this code is then moved to row 30, that is fine but the code changes in the following way:
=SUMPRODUCT(($F$12:$WWX$12>=C18)*1,($F$12:$WWX$12<=E18)*1,ABS($F$13:$ZZ$13))
C1 & E1 should not have changed at all, F13 & ZZ13 should have changed to F30 & ZZ30.
I am not sure if there is a way to fix the formula so it updates correctly, or these cells can stay in the same place as long as everything else sorts.
Is is possible to sort all columns except a few?
I am trying to get columns A:E on Sheet1 converted into columns A:H on Sheet2. I attached the workbook with the macro so you can see what I am talking about. I posted the same macro in the workbook below. It comes close to what I am trying to do but it only sorts based on Column E. I would like to include Columns A, B, C, and D in the sort instead of just Column E so the display will look like Sheet2.
View 2 Replies View RelatedI'm having a bit of trouble creating a macro that will sort columns in order - I've created a form that allows people to select a broad category ie) Schools, then a sub category ie) Primary or Secondary, and type in a third ie) Projects or Teachers
I'm trying to write a macro so that once they enter the form, their choices will be automatically sorted alphabetically, first by column A, then B, then C - to look like:
Schools - Primary - Projects - A
Schools - Primary - Projects - B
Schools - Primary - Projects - C
Schools - Primary - Teachers - B
Schools - Secondary - Projects - C
Schools - Secondary - Teachers - A
Schools - Secondary - Teachers - B
Schools - Secondary - Teachers - C
However I'm having the issue where if column B or C are left blank - the columns are not sorted properly, and the categories in column A get separated out..?
My code at the moment looks like:
Range("A1").Select
ActiveSheet.Unprotect
Range("A1").Sort Key1:=Range("A2:A3"), Order1:=xlAscending, Header:= _
xlYes, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
[Code] .......
I have the necessity to execute a macro for sorting a list of data on two columns.
More exactly, let's suppose to have this situation:
A 10/2/2008 FFFF GGGG HHH
B 01/3/2008 PPPP LLLLL NNNN
B 12/4/2008 XXXX JJJJJ PPPP
B 08/1/2008 HHHH SSSS IIIII
C 15/10/2008 AAA BBBB CCC
I need this sort:
A 10/2/2008 FFFF GGGG HHH
B 08/1/2008 HHHH SSSS IIIII
B 01/3/2008 PPPP LLLLL NNNN
B 12/4/2008 XXXX JJJJJ PPPP
C 15/10/2008 AAA BBBB CCC
r = Range("c65536").End(xlUp).Row
Range("a5:G" & r).Select
Selection.Sort Key1:=Range("G5"), Order1:=xlAscending, Key2:=Range("F5") _
, Order2:=xlAscending, Key3:=Range("C5"), Order3:=xlAscending, Header:= _
xlNo, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, DataOption3:= _
xlSortNormal
Rows("4:" & r).Select
For i = 5 To r
Rows(i).Select
If i Mod 2 = 0 Then
Selection.Interior.ColorIndex = xlNone
Else
Selection.Interior.ColorIndex = 36
End If
Next
Range("j5").Select
Application.Calculation = xlCalculationAutomat
this sorts range from A to G and set color to each second row how can I include S column in this range
I mean that cells in column S are moved with cells from columns A to G.
I have column A which contains a range of part numbers, and column B is an On Hand quantity of that part number.
Column C is just like column A, in that it contains the same part numbers but it has about 1,000 additional part numbers that are obsolete. Column D has the On Hand quantity for Column C.
Column A and B are old information as far as the On Hand quantities, where Column C and D are up to date On Hand. The problem is the old outdated part numbers in column C.
How do I make column A and column C match, but not lose their respective On Hand quantities? I know this sounds discombobulated, but basically I need column A's part numbers, with column D's on hand quantity.
I have some table with 3 columns: Name, Team, Players with the same name
I want to get to a 2 columns table without using "SORT" or something like that... using only formulas.
Maybe I wasn't so clear so I added a file with my problem.
I have 3 columns; A:Name, B:Debit & C:Credit. There are multiple row (approx 15,000) where I have a customer name and then a debit at one date, and a credit at another date. There is a debit to match every credit.
I would like to some how sort the sheet so that I can make sure each credit matched the debit. That way I can find what debit's don't match the credits. This is an example of how this looks. http://i303.photobucket.com/albums/n...kejoe/sort.jpg. I would like to sort it like the example on the far right (see attached picture)
Column A has customer name, columns B,C,D has corresponding sales data for
that month. Column E is blank. Column F has has customer name. Column
G,H,I has the same corresponding sales data for the next month.
Although Column A and F both have customer names, there are many changes
month over month with the addition and deletion of certain customers so the
rows do not match up exactly. Is there a quick way to have the rows match up
according to customer names in column A and F and then sort them
alpabetically?
Currently my list looks like this:
Jan Feb
A A
B C
D D
F E
H F
L G
M H
I would like it to look like this:
Jan Feb
A A
B
C
D D
E
F F
G
H H
L
M
I have a list of domains (about 200,000) that looks like this:
I have a list of urls (about 1 million) that looks like this:
I want my results to only show this (since this is the only thing in the second file that does not contain anything from the first file):
I have tried programs designed to do this but they either (a) shorten everything down to the domain or (b) wont remove anything since the domains are part of a longer url in the second file.
I feel like this should be somewhat simple, but none of the normal methods I know seem to work. I want to set up a formula (not a basic sort, since I want it to automatically correct every time I change information) so that for each row, several columns re-sort by date.
For instance, I have the following table:
Item Type Dates
A DV 5/2/14 6/12/14 7/11/15
B DS 3/11/13 6/19/14 1/2/15
C LG 11/12/14 8/1/15 1/12/16
...
where each of the dates is in a new column, but the "Dates" title is merged between the cells
I want to be able to resort just the date columns(/cells) for each row if a new date is written. I want the dates to be in ascending order. For instance, if I go back into the worksheet and replace Item A's date 5/2/14 with 1/1/16, I want the date columns JUST FOR Item A to reshuffle/resort to be:
A DV 6/12/14 7/11/15 1/1/16
without it resorting any other rows (Items) columns.
I am trying to write a Macro to basically do a lot of redundant formatting for me and I am stuck on one part of this code. Everything else works just dandy, but I am having the darndest time getting this Macro to sort by 2 columns instead of just 1.
I did the basic first step and recorded myself sorting the datasheet by both columns in 1 sort and got the code, but the problem is that the number of rows will change day-to-day, week-to-week, and so on, so I need it to not specify a cell number as the end of the range.
While searching around, I saw a very handy little piece of VBA code that will search for a header name, which is really nice because that would make it much easier to share this Macro with my coworkers who have different reports that all have columns in different locations.
So, I have a multi-part question. I will start with the most important one:
How do I alter this to not specify A9590 and D9590 as the last cells in those ranges?
ActiveWorkbook.Worksheets("Date XREF").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Date XREF").Sort.SortFields.Add Key:=Range( _
"A6:A9590"), SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:= _
xlSortNormal
ActiveWorkbook.Worksheets("Date XREF").Sort.SortFields.Add Key:=Range( _
"D6:D9590"), SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:= _
xlSortNormal
[code]....
Is there a way to have the Macro find where the header row is? The header rows in our reports can appear anywhere from Row 1 to Row 8 depending on how the report is set up (usually we have some information about the data, date range, etc at the top).
Dim c As Integer
With ActiveWorkbook.Worksheets("Date XREF").Range("A5").CurrentRegion
c = .Find(What:="Assignment ID", After:=.Cells(1, 1), LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Column
.Sort Key1:=.Cells(1, c), Order1:=xlDescending, Header:=xlYes, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End With
I have a sheet that looks like this...
Date
Start #
End #
1/1/11
1000
1099
[Code] ........
And I want to sort it to look like the following, in order to track each number to a date and to enter into an external database...
Date
#
1/1/11
1000
1/1/11
1001
1/1/11
1002
I need to list the entire thing instead of having starting and ending part #s. Any macro to do this? The actual spreadsheet has 250 dates and over 30k part #'s so doing it out is not really an option.
I have a code with perfectly sorts Excel rows when you click a button:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Range("C1:S70").Select
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending
End Sub
but if i like to sort the columns by Row 1 how i can do it?
Here is the Sheet so far: ...
View 9 Replies View RelatedWhat formula will sort the infomation in the first column into the other relevant columns.
View 9 Replies View RelatedI'm trying to sort selected rows by two columns, but simultaneously instead of sorting by "Column A and THEN Column B". In my case, this is numerical data where there is ONLY data in one column or the other, never both.
For example:
5 _
10 _
_ 1
_ 6
_ 4
Should sort to:
_ 1
_ 4
5 _
_ 6
10 _
Is it possible to re-order entire columns based on cell values? For example, row A gives values of 1 thru 10 to the first 10 colums. I would like a macro that reorders the entire columns based on that value.
View 6 Replies View RelatedI am trying to create a VBA macro that autosorts a selection of columns by column A. I currently have the below already written which gives the desired effect. I was just wondering if there was a way i could have this script constantly running on the sheet so it is always sorted correctly without me having to click Run Macro everytime.
Sub Macro1()
Columns("A:F").Select
Selection.Sort Key1:= Range("A1"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
Have a spreadsheet with 15 columns. In one of the columns is the name of the company and that column is not in alphabetical order. The city, state, zip code, business type and all the other pertinent data about that company is in the same row as the name of the company. My intent would be to put the company names in alphabetical order and keep all the company information in the same row as the company name.
View 1 Replies View Related