Sorting Certain Worksheets Based On Cell's Content
Jan 22, 2013
I have standardized each existing worksheets and any new worksheet to have certain parameters. The purpose of the Macro requested is ensure these worksheets are sorted alphabetically (and only these worksheets). The code I have been working with is contained below. It is working as expected but now I need to incorporate a statement which places the following condition:
Sort worksheets only if A3 has cell value of eCRF NameIgnore worksheet name: TOC & ENTER ECRF NAME
VB:
Sub Sort_Tabs()
'declare our variables
Dim i, j As Integer
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I have a worksheet with a row of mixed cells near the top. By "mixed", I mean some cells have only numeric data (numeric-cells) and some have only words (word-cells).
GOAL: I want to sort the columns to the following order:
First all the columns with only numeric-cells in the mixed row, with those columns sorted in DESCENDING numeric order of the numeric-cells in the mixed row; followed by the columns with only word-cells in the mixed row sorted by ASCENDING alphabetic order.
So far all I have been able to accomplish is:
First all the columns with only numeric-cells in the mixed row, with those columns sorted in ASCENDING numeric order of the numeric-cells in the mixed row; followed by the columns with only word-cells in the mixed row sorted by ASCENDING alphabetic order. This was accomplished by a simple sort using ASCENDING order on the mixed row.
OR
First all the columns with only word-cells in the mixed row, with those columns sorted in DESCENDING alphabetic order of the word-cells in the mixed row; followed by the columns with only numeric-cells in the mixed row sorted by DESCENDING numeric order. This was accomplished by a simple sort using DESCENDING order on the mixed row.
This may sound as confusing to you as it does to me, so I have attached an example file showing hypothetical Input Data and the Desired Result.
I did the example file in multiple steps, but that's too painful in the general case where calculations determine what is in which cell in the mixed row. All data are calculated, even the word-cell data AND so dependent on other data, and the columns in the mixed row that are word-cells and those that are numeric cells don't remain the same.
Eventually I'd like to do this with a macro, so if VBA has some power to do this that EXCEL commands don't, then that's fine.
I could probably live with the final result as numeric-cell columns sorted in DESCENDING order followed by word-cell columns sorted in DESCENDING order, but I haven't even been able to accomplish that AND it's not quite the goal.
I have a named range (D:16 F:800) called “NameRange” which contains names. I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom Tom Sue Mary Bill Ted Tom Sue Bob Fred Bill Sue Bob Tom Kim
I am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
I am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
I have a drop down list made from the Forms toolbar with a list of items: 1, 2, 3, 4, 5. I have set it with a linked cell, so when you choose, say 3, from the dropdown, 3 appears in B10.
I was hoping to add a 'Go' button, which would run another macro depending on what is in B10, i.e. so if 3 was chosen, then you press 'Go', Macro3 would be run.
So I have 5 macros called Macro1 - Macro5, and I need some code for the 'Go' button which will run the right macro depending on what number is in cell B10.
I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
I am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B XXXX PRODUCT 1 YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
multiple search match and replace content in a different column so for example
new workbook (look up table) sku search1 search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
I want to format a range of cells based on the name listed in a cell in column A (starting @A6). I currently do this manually. It is to help me visually see the line I am working with and for what person.
I am almost certain that is going to take a VBA, but I know little to nothing about setting one up.
I just ordered vba for dummies, in the meantime I will have to get my info from the experts on this board. I want to use a name I have in a cell in a msgbox routine.
I have created two buttons in a worksheet to navigate to two other worksheets. I would like a cell to display 'YES' automatically if one of the two buttons is clicked and or to display 'NO'. I also would like to change the colors of these cells change automatically depending on which button is pressed.
I have a 3 column table with 20 rows. The first two columns contain travel expense data. The cells in the third column are blank exept for whichever cell I enter an "x" in. Please let me what formula or worksheet function do I use to calculate the travel expenses based on the data in the first two columns that correspond to the row of the cell with an "x" in the third column?
I have a large spring-selection table, which is populated with things like "4.88 x 635" and "5.26 x 584". There are 1520 fields in the table populated with any combination of the 432 springs available for selection. The spreadsheet takes my criteria, finds out which springs it's allowed to choose from, and populates the table. It could be 20 springs, could be 30. I'm trying to get the number down to 10. The table updates when I change the criteria.
What I'm after at this point is a macro which will color-code the table based on the cell contents, so that all the "4.88 x 635" have one color and all the "5.26 x 584" have another colour. Doesn't have to be any particular colour, just so long as it's a bit different to the cells around it. how the table reacts.
The biggest spring size is "6.93 x 1727", which could be converted to a color reference, perhaps by adding up all the digits, or taking out the non-digits and dividing by 123781, I don't know I'm thinking out loud. And then just assign the cell color to that number.
Where to start a macro like this. Obviously it would use ActiveCell.Interior.ColorIndex but I can't find anything like this on the web.
I have inherited a spreadsheet from someone else that rather cleverly (in my humble opinion) sets the colour dependant on the contents. ie negative value is red, zero is amber and positive is green.
i like the idea and would like to use it on a spreadsheet of my own, but have tried to find out how it is done and can't!
And I have set up a seperate worksheet (2) as an invoice. What I have been trying to do is when I enter a qty in worksheet (1), worksheet (2) will reconise an entry in the qty colum an copy selected fields/ cells. I can do a "=" or use an "if" statement looking at anything greater than "0". but is there a way I can get the invoice worksheet to ignore any lines with "0". So it will only copy over the information with only qtys for the invoice ?.
I am trying to do some thing simple, but i causes me a lot of problem in several areas. I am using the
sheets( range("c5")).select
to simply select the sheet that is named in cell c5 on the current sheet. can anyone give me a correct way to accomplish this that I can use in other applications that i come accross?
I have a questioner in a excel spreadsheet. Column C have yes or no answers. If answer yes is implied then I want the number 2 to appear in Column F of no is implied then the number 3 will appear. I am having trouble writing the language for this.
I have a dynamic table (rows regularly added or deleted) that is generated automatically based on choices made by the user in another worksheet. I need a function that will examine all the cells in one column, and when it finds a difference between two cell entries, it will change the border between these two entries to dark (medium weight), and then extend this border across the table. The end result should be that wherever the cell contents differ within a column, the table is divided by a darker border across the entire row.
I'm trying to find a macro that will allow me to enable several drop down lists in the same cell based on the content of another cell. In other words:
If cell A1 is the data entry cell, and the user enters "cat" Then cell B1 will display a drop down list of previously grouped options: "mouse, bug, bird"
If in cell A1 the user enters "dog" Then cell B1 will display a different list of previously grouped options: "mole, rabbit, kibble"
I'm trying to display a different image based on the contents of a cell. For example if cell A1 = "Gerrard" I would then like to display a picture of Steven Gerarrd. Is this possible? If so can anyone give me a steer in how I might acheive this.
I wish to remove the page headers that were imported along with the raw data. Here's the code I've been using.
Column_To_Check = 3 Start_Row = 1 End_Row = ActiveSheet. Cells(Start_Row, Column_To_Check).CurrentRegion.Rows.Count MsgBox End_Row Search_String = "." For Row_Counter = Start_Row To End_Row If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value <> Search_String Then ActiveSheet.Rows(Row_Counter).Delete Row_Counter = Row_Counter - 1 End If Next Row_Counter End Sub
When I import the data from the text file, there are 3 dimensions separated by a period in the same field. I.E: ABC.DEF.GHI and I use the break points to seperate as such: ABC|.|DEF|.|GHI|. Therefore, all rows that contain data also contain a period in cell C, but headers don't.
I am trying to format cells based on what is in them across the board. Is there a way to conditional format based on what is in certain cells? I have 5 columns. I need to color in every NA only in the rows that have 1 or less cells with a number in there. So if there is 2 cells in that one row that have a number in them then leave the whole row white. If there is only 1 number in that row and the rest are NA then color all the NA's in red......
I have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
I have a cell A1 in sheet2 linked cell A1 in sheet1 (simply A1='sheet1'!A1). A1 in sheet1 is a data validation drop down menu.
I want to clear the content of A2 in sheet 2 everytime the content of A1 in sheet2 changes/is updated. That is everytime the value of A1 in sheet1 is changed using the drop down menu.
I tried using a Worksheet_Change event macro (which I do not fully understand) but it won't work with a cell that updates from a calculation. It also doesn't work if triggered from a cell from another worksheet (I tried linking it to cell A1 on sheet1 in this case).
Private Sub Worksheet_Change(ByVal Target As Range) If Intersect(Target, Range("A1")) Is Nothing Then Exit Sub If Target.Count > 1 Then Exit Sub Range("A2").ClearContents End Sub
Any simple solution to clear the content of cell A2 in sheet2 when A1 in sheet2 updates?
