Hiding Row Based On Cell Content?
Jul 9, 2014I am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
[Code] .....
ADVERTISEMENT
Change Content Of One Cell Based On Content Of Another
Apr 18, 2014Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
Hiding Columns Based On Cell Value
Aug 7, 2011I am trying to hide columns where the Value in the cells on row 9 is "", that cell being populated with a formula where the result is "". However I am getting the Compile Error Message 'Next without For'. Any clues?
Sub GraphC()
Dim a As Integer
Dim ColumnVar As Variant
ColumnVar = Array("B", "C", "D", "E", "F", "G", "H", "I", "J", "K")
[Code] .........
Hiding CheckBox Based On Cell Value
Mar 20, 2012Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
If Worksheets("Dosing").Range("BM21").Value = 0 Then
CheckBoxLD.visable = False
Else: CheckBoxLD.visable = True
End If
End Sub
Hiding Rows On One Tab Based On Value Of Cell In Another Tab?
Dec 27, 2012I have numerous tabs in this file, but all of the tabs all summarize to the first tab called "Annual Record".
So after "Annual Record", tabs follow as "WO1", "WO2", etc...
On the tab called "WO1", I have cell AJ5, which can have 3 status selected (Data Validation List), which is either Inactive, Open, or Completed. If cell AJ5 on "WO1" says "Inactive", then I want a named range on "Annual Record" to be hidden. Right now I have the range named "WorkOrder1". This named range is essentially rows 4-7. So if it's easier to hide rows vs. a named range, then so be it. I also would like it to happen automatically (perhaps what you would refer to as a change event). When cell AJ5 is change to either "Open" or "Completed", then the rows would unhide. I'm thinking that this would be repeated for tab "WO2". If cell AJ5 says "Inactive", then rows 8-11 on the tab "Annual Record" or the named range "WorkOrder2" would be hidden. And again, if the cell AJ5 is change to anything other than "Inactive", then the rows or range would unhide.
Hiding Rows Based On Value In Cell
Mar 5, 2009I need to hide 8 rows (30-37) based on a value in cell B28.
If the value is 2 then only show rows 30 and 31
If the value is 3 then only show rows 30, 31 and 32
Then continue this up to the user puts in the value of 8 and no rows are hidden.
Hiding Rows Based Upon A Cell Value
Sep 7, 2009I'm trying to come up with some code that will hide a number of rows within the range row 7 to row 15 based upon the value of cell G1.
e.g if G1 is 1 rows 8-15 are hidden, if it is 2, rows 9-15 are hidden i.e the number of rows visible within that range equals the value of G1.
Hiding Sheets Based On Value In Dropdown Cell
Mar 21, 2007I have a workbook that has about 30 different sheets with names titled "Joe", "Jane", "Paul", etc.
I have a Cell (B12) that has been formatted as a dropdown menu with about a dozen different options such as "Audit A" , "Audit B" or "Other" etc. What i'd like to do is hide or display certain sheets based on what the value is in cell B12.
if cell B12 says any of the following "Audit A" or "Audit B" then it would hide certain sheets. If the value in B12 says "Other" or something other than "Audit A" or "Audit B" then it wouldn't hide anything at all. I tried searching and couldn't find anything like this although it may have been answered before.
VBA - Hiding Columns Based On Cell Values
Mar 20, 2014the support this board has given me as I learn VBA. I have three columns - Q, R, and S. I only need to see columns R and S if the cell values don't equal those in column Q or each other. So if I have cell values like the ones listed in the example below, then I don't need to see columns R and S.
Q Header
R Header
S Header
50
50
50
[Code]....
Hiding Rows Based On Cell Value Not Working
Jun 26, 2014I have a macro that I am trying to add a feature to at the end of the code that hides blank rows. I have tried numerous methods based upon other forums, but my code does not seem to work and does not hide blank rows. In red is the section of code that I am having trouble with.
Sub Update()
Dim c As Object
Dim rngA As Range
Dim cc As Object
Dim AA As Range
'Check every cell in the range for matching criteria.
[Code] ...........
Hiding Columns Based On Cell Value (macro)
Dec 1, 2009I have an elaborate spreadsheet that I have made for my company. I will give a little background how I have it set up:
E6 contains a drop down menu of all products that we sell, and line items are populated based on the selection here. In columns N and O, I have a "Business Partner Costs" table that calculates a specific discount % based on the business partner.
Some of our products are sold to BPs with no discount. For these specific products, I am trying to get the BP Costs table to disappear, or hide.
Basically, I want something like: "=if(or(e6=ae2,e6=ae7,e6=ae12,e6=ae13,etc),hide columns N&O,show columns N&O)" in macro format.
Hiding Columns In The Worksheet Based On Cell Value
Oct 20, 2006I have a worksheet that has >10 rows of data and over 150 columns. The values in the cells for individual row include NA, NE, D, A and S. Each row will have one or all of these values in one of the cells. Here is the question:
How do I hide columns containing 'NA' in the cell for a particular row, when only that row is selected by clicking on any cell in row 'A'? For example: If my row 3 cell values for column A, J, R, and X are 'NA' I want to hide the column containing 'NA' only and display everything else? And only when I click on row 3 column 'A'
Add Value Based On Cell Content
Mar 18, 2009I have a named range (D:16 F:800) called “NameRange” which contains names.
I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom
Tom Sue
Mary Bill Ted
Tom Sue Bob
Fred Bill Sue
Bob Tom Kim
and offset “x” to look like this:.......
Runtime Error '9' - Hiding Worksheets Based On Cell Value
May 6, 2009I'm relatively new to this, and its entirely possibly (more likely probable) that I am attempting to this in the wrong way, but here's what I'm dealing with...
View 8 Replies View RelatedHiding / Unhiding Rows Based On Cell Input
Jul 2, 2009I am trying to work out a macro to hide and unhide rows in worksheet 6 based on a cell input (cell I6) in worksheet 1 based on the following:
>> If I6 in Worksheet 1 = 1 or 5 or 6 then Hide Rows 19 to 24 in Worksheet 6
>> If I6 in Worksheet 1 = 2 then Hide Rows 21 to 24 in Worksheet 6
>> If I6 in Worksheet 1 = 3 or 4 or 7 then Hide Rows 17 to 20 in Worksheet 6
>> If I6 in Worksheet 1 = 8 or 9 then Hide Rows 17 to 20 and Rows 23 to 24 in Worksheet 6
And / Or Function Based On Cell Content
May 8, 2014I'm trying to obtain a result based on the number of characters in a cell. If the cell content is blank or contains 9 digits then leave blank.
Any other result must provide the outcome of "incorrect number supplied".
I've tried the following formula but it doesn't work.
Message Box Based On Cell Content And Day?
Mar 18, 2012I am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
Run Macro Based On Cell Content
Aug 7, 2006I have a drop down list made from the Forms toolbar with a list of items: 1, 2, 3, 4, 5. I have set it with a linked cell, so when you choose, say 3, from the dropdown, 3 appears in B10.
I was hoping to add a 'Go' button, which would run another macro depending on what is in B10, i.e. so if 3 was chosen, then you press 'Go', Macro3 would be run.
So I have 5 macros called Macro1 - Macro5, and I need some code for the 'Go' button which will run the right macro depending on what number is in cell B10.
Modify Cell Background Color Based On Cell Content
Jul 1, 2014I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
View 2 Replies View RelatedUsing A Formula To Populate A Cell With Certain Data Based On Content Of Another Cell?
Jul 7, 2014I am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
Multiple Find And Replace Cell Content Based On Another Cell?
Mar 25, 2014 multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
Sorting Certain Worksheets Based On Cell's Content
Jan 22, 2013I have standardized each existing worksheets and any new worksheet to have certain parameters. The purpose of the Macro requested is ensure these worksheets are sorted alphabetically (and only these worksheets). The code I have been working with is contained below. It is working as expected but now I need to incorporate a statement which places the following condition:
Sort worksheets only if A3 has cell value of eCRF NameIgnore worksheet name: TOC & ENTER ECRF NAME
VB:
Sub Sort_Tabs()
'declare our variables
Dim i, j As Integer
[Code].....
Formatting Row Of Cells Based On A Cell Content
Feb 16, 2010I want to format a range of cells based on the name listed in a cell in column A (starting @A6). I currently do this manually. It is to help me visually see the line I am working with and for what person.
I am almost certain that is going to take a VBA, but I know little to nothing about setting one up.
I have attached a sample. I am using Excel 2003.
Asigning Variables Based On Cell Content
Sep 30, 2007I just ordered vba for dummies, in the meantime I will have to get my info from the experts on this board. I want to use a name I have in a cell in a msgbox routine.
Currently I have
Changing Cell Content Based On Button
Oct 14, 2008I have created two buttons in a worksheet to navigate to two other worksheets. I would like a cell to display 'YES' automatically if one of the two buttons is clicked and or to display 'NO'. I also would like to change the colors of these cells change automatically depending on which button is pressed.
View 2 Replies View RelatedHow To Lookup Row # Based On Content Of Another Column's Cell
Oct 24, 2005I have a 3 column table with 20 rows. The first two columns contain travel
expense data. The cells in the third column are blank exept for whichever
cell I enter an "x" in. Please let me what formula or worksheet function do
I use to calculate the travel expenses based on the data in the first two
columns that correspond to the row of the cell with an "x" in the third
column?
Colour Object Based On Cell Content?
Mar 22, 2011I have a circle object on an Excel spreadsheet(I used "Insert", "Shapes" to put it there).
I would like to change the colour of the circle object based on the contents of cell A1.
Cell A1 will be "Red", "Yellow" or "Green".
If I type "Green" into cell A1, then I would like the circle object to change to green.
If I type "Yellow" into cell A1, then I would like the circle object to change to yellow....
VBA To Change Cell Color Based On Content
Feb 13, 2012I have a large spring-selection table, which is populated with things like "4.88 x 635" and "5.26 x 584". There are 1520 fields in the table populated with any combination of the 432 springs available for selection. The spreadsheet takes my criteria, finds out which springs it's allowed to choose from, and populates the table. It could be 20 springs, could be 30. I'm trying to get the number down to 10. The table updates when I change the criteria.
What I'm after at this point is a macro which will color-code the table based on the cell contents, so that all the "4.88 x 635" have one color and all the "5.26 x 584" have another colour. Doesn't have to be any particular colour, just so long as it's a bit different to the cells around it. how the table reacts.
The biggest spring size is "6.93 x 1727", which could be converted to a color reference, perhaps by adding up all the digits, or taking out the non-digits and dividing by 123781, I don't know I'm thinking out loud. And then just assign the cell color to that number.
Where to start a macro like this. Obviously it would use ActiveCell.Interior.ColorIndex but I can't find anything like this on the web.
VBA To Hide Rows Based On Cell Content
Jun 23, 2006If I have data in range A1:Z99 I want to write a macro to hide all the rows that have a zero in the A column.
View 9 Replies View RelatedSetting Colour Of Cell Based On Content
May 3, 2007I have inherited a spreadsheet from someone else that rather cleverly (in my humble opinion) sets the colour dependant on the contents. ie negative value is red, zero is amber and positive is green.
i like the idea and would like to use it on a spreadsheet of my own, but have tried to find out how it is done and can't!