I want to format a range of cells based on the name listed in a cell in column A (starting @A6). I currently do this manually. It is to help me visually see the line I am working with and for what person.
I am almost certain that is going to take a VBA, but I know little to nothing about setting one up.
I have attached a sample. I am using Excel 2003.
I am trying to format cells based on what is in them across the board. Is there a way to conditional format based on what is in certain cells? I have 5 columns. I need to color in every NA only in the rows that have 1 or less cells with a number in there. So if there is 2 cells in that one row that have a number in them then leave the whole row white. If there is only 1 number in that row and the rest are NA then color all the NA's in red......
View 4 Replies View RelatedI am using excel 2000. I want to apply conditional formatting to a range of cells if they contain (V) as part of the cell contents. The cells will generally look like this : 09.00-6 (V) or 9-5.30 (V). I want to shade any cell if part of the contents of that cell is (V).
View 2 Replies View RelatedFormula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.
I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.
I'm doing a Comparison of Price quotes from some different vendors and I want to highlight which one is the lowest.
4 Rows with Totals
The Cells are B21, B43, B65, B87
I need each value in each location to be compared to the other 3.
The other thing is that I also C through V that need the same thing.
How multiple cells can be formatted based on one cell value. See the screenshot attached to understand what I am trying to achieve. I am very new to excel formatting, vba etc.
ExcelFormattinQs.jpg‎
I have this:
Sub CompileData()
'Dim rng1 As Range
'Dim rng2 As Range
'Set rng1 = Worksheets("Sheet2").Range("A4").End(xlDown)
'Set rng2 = Worksheets("Sheet2").Range("C4").End(xlDown)
'Set AllRng = Union(Range("rng1"), Range("rng2"))
'Worksheets("Sheet1").Range("A5").End(xlDown).Delete
Now when its pasted it has cells with "Nil" in it. I need to delete them, or just not copy them over.
I have a list of Marketing Product descriptions that I have to match to a list of system codes and was wondering if I can do this in excel.
Marketing Bumph (first Tab):
A B
1 Marketing Code Friendly description
2 XYZ1111 Offer 1
3 ABC111 Offer 2
System Info (real codes not marketing)
A B
1 Marketing Code Real Value
2 XYZ1111 GL321
3 ABC111 FF453
So what I want to end up with is:
A B C
1 Marketing Code Friendly description Real Value
2 XYZ1111 Offer 1 GL321
3 ABC111 Offer 2 FF453
I have a spreadsheet where I want to be able to Fill cells green in Column B to Column N for any Rows that have a value in Column L. All other Rows should remain the current colour (orange).
I can Fill the cells in Column L using conditional formatting but am not sure if I can use Conditional Formatting on other Columns so that their Fill colour is determined by the value in Column L?
At the moment I have 1 spreadsheet with 12 worksheets that I have to enter data into. I would rather enter all the data onto one sheet then have a macro move the data into the correct worksheet based on the contents of columns A and B.
The raw data will be entered into the worksheet "Data". Once complete, I would like the user to press a button and the macro to then identify from column A the suppliers name. If it is not one of the recognised suppliers, then it would move the row into the worksheet "one off". If it does recognise the supplier then it checks column B to see which of the two supplier's two worksheets it needs to copy it to, with the data entered into the correct column based on the column title (ie only the white columns).
I have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
what i would like to do is change the fill colour of D68 if the word Air appears with in D5:D65?
View 6 Replies View RelatedExel 2010 cells formatted to Time
need to look at h1 and h2 if no data ignore
other wise add data together if total exceeds 08:45
then deduct 45min from h1
if combined the are less than 8:45 then h3 must equal 8:00 by altering h1 only
Example
h1= 5:00
h2= 2:00
h3= 8:00
h1=
h2=
h3=
h1= 8:00
h2= 2:00
h3= 7:15
how to apply conditional formatting via VBA to a range of cells based on input from another range of cells. Obviously this would be easy in Excel 2010, but I'm still using 2003 at the office and it needs to stay in this format to be readable by other users:
For cells M8:EK8, my conditional formatting
condition 2: Formula Is =AND($E$8>=M2,(($E$8-$D$8)>=(N2-$M$2))), color index is 40
condition 3: Formula Is =AND($F$8<=M2,$G$8>=M2), color index is 39
I want to add:
condition 4: Formula Is =AND($H$8<=M2,$I$8>=M2), color index is 40
condition 5: Formula Is =AND($J$8<=M2,$K$8>=M2), color index is 39
and so on
The cells in the range M8:EK8 are blank, they only get colored based on input added to D8 to K8. If there is no input, then the cells should be uncolored.
resource tracking ex.jpg
I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
I have a named range (D:16 F:800) called “NameRange” which contains names.
I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom
Tom Sue
Mary Bill Ted
Tom Sue Bob
Fred Bill Sue
Bob Tom Kim
and offset “x” to look like this:.......
how to combine the content of 2 cells into one cell and have the information separated by a comma.
For example:
CELL 1:
Software 1
CELL 2:
Spreadsheet Software
The desired results is:
CELL 3:
Software 1, Spreadsheet Software
I'm trying to obtain a result based on the number of characters in a cell. If the cell content is blank or contains 9 digits then leave blank.
Any other result must provide the outcome of "incorrect number supplied".
I've tried the following formula but it doesn't work.
I am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
[Code] .....
I am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
I have a drop down list made from the Forms toolbar with a list of items: 1, 2, 3, 4, 5. I have set it with a linked cell, so when you choose, say 3, from the dropdown, 3 appears in B10.
I was hoping to add a 'Go' button, which would run another macro depending on what is in B10, i.e. so if 3 was chosen, then you press 'Go', Macro3 would be run.
So I have 5 macros called Macro1 - Macro5, and I need some code for the 'Go' button which will run the right macro depending on what number is in cell B10.
I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
View 2 Replies View RelatedI am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
I have standardized each existing worksheets and any new worksheet to have certain parameters. The purpose of the Macro requested is ensure these worksheets are sorted alphabetically (and only these worksheets). The code I have been working with is contained below. It is working as expected but now I need to incorporate a statement which places the following condition:
Sort worksheets only if A3 has cell value of eCRF NameIgnore worksheet name: TOC & ENTER ECRF NAME
VB:
Sub Sort_Tabs()
'declare our variables
Dim i, j As Integer
[Code].....
I just ordered vba for dummies, in the meantime I will have to get my info from the experts on this board. I want to use a name I have in a cell in a msgbox routine.
Currently I have
I have created two buttons in a worksheet to navigate to two other worksheets. I would like a cell to display 'YES' automatically if one of the two buttons is clicked and or to display 'NO'. I also would like to change the colors of these cells change automatically depending on which button is pressed.
View 2 Replies View RelatedI have a 3 column table with 20 rows. The first two columns contain travel
expense data. The cells in the third column are blank exept for whichever
cell I enter an "x" in. Please let me what formula or worksheet function do
I use to calculate the travel expenses based on the data in the first two
columns that correspond to the row of the cell with an "x" in the third
column?
I have a circle object on an Excel spreadsheet(I used "Insert", "Shapes" to put it there).
I would like to change the colour of the circle object based on the contents of cell A1.
Cell A1 will be "Red", "Yellow" or "Green".
If I type "Green" into cell A1, then I would like the circle object to change to green.
If I type "Yellow" into cell A1, then I would like the circle object to change to yellow....