Hello, I have a question about sorting information using dates but using a range. I need this to sort when I enter a date range into the spreadsheet (the blue blocks on the attached spreadsheet). The factors in colum G need to be sorted by month and input into the yellow highlighted area in column B. There may be an easier way of pulling the data from the "Data" sheet but this was the best I could figure out. Overall, January (or any of the months)needs to have the January (or appropriate) factor that fits within the date range that was input but sorted properly based on the months listed in Column A.
I have a Column J with Dates formated in the dd/mm/yyyy format how do I used the Selection.Sort key:= xx order:= to sort the rows that have a date in the selected columns. Where J_End in the code below is the Column I need to refer to its sorting to a point but im not sure whats wrong with it.
All I really need it to do is group all the ones with a date (completed) and without a date (not completed) thus why im sorting it and the other stuff prioritize it.
I Have a daily spreadsheet that I want to sort automatically by date. It has a header in the first two rows ( which shouldnt be a problem as I can sort the data i want from from cell A3 to J100) etc..
Problem 1) Each date is separated by a blank row which I need to retain.
Problem 2) some records have multiple rows which are together and need to be retained
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
I am trying to convert a long list of dates from text to date (see A) so that I can sort them from newest to oldest. I've tried converting them using differnt formulas (see B:C) but these don't work.
I have a dataset where the dates are in the following format:
19970803 = 3rd August 1997 (YYYYMMDD)
My aim is to sort the data into months and into 'turn of the month' periods.
-Is there a way to isolate rows using a search term like "****08**" for all the august entries? -Likewise if i want data between 27th-3rd for every month is there a way to sort for entries between "******27 - *******03".
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
I have a table that looks like this (its basically a historical data of a stock exchange):
Date Index January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range. Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date Dim projEndDate As Date Dim DateStart As Date[code]....
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
Let's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment B1 contains ending date of employment C1 contains specified beginning date (criteria) D1 contains specified ending date (criteria)
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data. Set 1 (hours) Employee number, date, hours 12345, 1-2-2014, 6 12345, 1-3-2014, 8 12345, 1-10-2014, 8
Set 2 (periods) Employee number, start date, end date 12345, 1-1-2014, 4-1-2014 12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this. 12345, 1-2-2014, 6, 1-1-2014, 4-1-2014 12345, 1-2-2014, 8, 1-1-2014, 4-1-2014 12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
Is there a UDF that can determine the number of weeks for a date range specific that is not relative to the week number for the year but for the date range itself. i am aware of the weeknum function but this is for week number relative to the year. eg. date range 01/03/2008 - 31/05/2008 has approx 12 weeks and 14/05/2008 will be week number 10 for the range.
I'm having a problem with data validation. I set an entire column so that it could only be a date between the first date in the list and the current date. I tested a few cells to make sure that it was working the way I wanted and I noticed that it allows a random number like 3 or 5 to be input after row 50. This would create a date in the 1900s. Why is this happening and how can I stop it.
I have a column showing date DD/MM/YYYY. I want to be able to get a new column stripping out the days so that I can chart changes over a month rather than each day of the last 2 years. I have tried altering the cell format to MM-YYY although this shows the format I want when i run a pivot chart it will still create records for individual days. I then tried copying and pasting the above as text only. This results in the pivot chart sorting A-Z rather than by date.
1. I downloaded from my online bank a Excel statment file. 2. When I open it in Excel. The date order is wrong, it is newest entries first (top). 3. I need it the other way, oldest first. I get Excel to sort oldest to newest. Which it does, but....
When I have more than 1 entry on date, they are the wrong way around.
Example: It should be, 01/06/09 £10 01/06/09 £105 01/06/09 £200.....
Is there a way to have a sheet automatically sort itself by date? I keep selecting cells and sorting manually but it get tedious doing it over and over every time I enter something new. Like if I had dates in row G every time I added something new it would automatically sort all rows by date.
I am trying to insert a formula that counts the number of dates within a certain date range. why this sample file does not work, the answer I am looking for in cell C1 is 3.
I'm setting up a spreadsheet to manage recurring tasks that fall within a given date range.
I have a named variable (theDate) which pulls the list of matching tasks that fall on a single day, but some fall on multiple days, so I need to somehow extract the next valid date the task will come due.
I've been playing with formulas until my brain got scrambled. I suspect I may not have got enough sleep over Christmas and there's something staring me in the face I'll kick myself over.
Column Headings are: Description (Col B), [various notes C:E], M, T, W, T, F, S, S, (Cols F:L, marked with x when relevant), StartDate (M), EndDate (N) and my nemesis, NextDate.
That formula should check that 'theDate' falls within the range, if so, lookup whether the appropriate weekday is null or not, and if it's not, then the current date comes back. If it is, then I need it to find the next weekday (by that I don't mean M-F, I mean any of the 7) when it will fall and return that date. I do have the weekday number in F2 if needed, and I'm using a weekday return type of 2 (Mon=1).
'theDate' will usually be in the future, but not always. It needs to not fall over if it's past.
I'd like to do this via formula ideally, since the SOE I'm on keeps losing my Analysis Toolpak, but if I have to code, I have to code.
I am trying to create an array formula which confirms whether a specific date falls within a list of date ranges. I have a list of start dates in column A and end dates in column B. Each row represents a date range. How can I write an array formula to check if a date falls within any of these data sets (i.e. date ranges)? I have attached a sample spreadsheet to show
This is a sub that uses the Find method to find a series of dates and copy them to another worksheet. The following error comes up: Object variable or With block variable not set. I have tried using a set command etc. but other errors end up coming up.
Private Sub CommandButton7_Click()
On Error Goto errorHandler Dim startDate As String Dim stopDate As String Dim startRow As Integer Dim stopRow As Integer startDate = InputBox("Enter the Start Date: (mm/dd/yy)") If startDate = "" Then End stopDate = InputBox("Enter the Stop Date: (mm/dd/yy)") If stopDate = "" Then End 'startDate = Format(startDate, "mm/??/yy") 'stopDate = Format(stopDate, "mm/??/yy") startRow = Me.Columns("A").Find(startDate, _ LookIn:=xlValues, lookat:=xlWhole).Row stopRow = Me.Columns("A").Find(stopDate, _ LookIn:=xlValues, lookat:=xlWhole).Row Me. Range("A" & startRow & ":A" & stopRow).Copy _ Destination:=Worksheets("Report").Range("A1") End
errorHandler: MsgBox "There has been an error: " & Error() & Chr(13) _ & "Ending Sub.......Please try again", 48
