Compare Dates To Date Range & Return Date Based On Outcome
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Compare Date: Compare The Date From The User Input And The Date Listed
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31)) Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long lngBegin = 9 'beggining of data lngEnd = 232 'end of data lngCmp = InputBox("Please enter the date", "Begining of the week") Lngcmp1 = DateAdd("d", 1, lngCmp) lngCmp2 = DateAdd("d", 2, lngCmp) lngCmp3 = DateAdd("d", 3, lngCmp) lngCmp4 = DateAdd("d", 4, lngCmp) lngCmp5 = DateAdd("d", 5, lngCmp) 'lngCmp1 = lngCmp + 1 'lngCmp2 = lngCmp + 2 'lngCmp3 = lngCmp + 3 'lngCmp4 = lngCmp + 4 'lngCmp5 = lngCmp + 5 lngResults = 0 lngResults1 = 0 lngResults2 = 0..................................
View Replies!
View Related
Compare & Confirm Dates In Column To Date In Cell
I am trying to do a macro that looks to see if the date is different from one cell to another going down in rows. I got it to work until the cell is empty then it says the date dont match but I just want it to stop the loop. so it should go down a list check to see if the date is the same all the way down the list, stopping if cell is blank, if not give a message box, if it is the same stop. Is As follows Dim rowNum As Integer, colNum As Integer, currCell As Range rowNum = ActiveCell.Row colNum = ActiveCell.Column rowNum = rowNum + 1 'get first cell Set currCell = ActiveSheet.Cells(2, 3) 'loop while cell not empty Do Until currCell.Value = " " If currCell.Value = ActiveSheet.Cells(2, 3) Then If currCell.Value = "" Then End If
View Replies!
View Related
Fill Table Based On Another Within Date Range & Cut Off Date
I have an 'existing results table' as per my attached sample. I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample. I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range. Please can someone show me the formula on my attached sample? Please see my example in red. I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
View Replies!
View Related
DATE Function & IF Function (return A TRUE Or FALSE Based On A Date In A Cell)
I am trying to return a TRUE or FALSE based on a date in a cell. for example: if cell A1 = 07/11/2009 I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date. I have tried stuff like: =IF(A1=TODAY()-14,"True","False") but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
View Replies!
View Related
Date Based On Other Dates
In A8 I have a number 1 - 5. This identifies the weeks in a month 1 - 4 for four week months. The 5 is for a five week accounting month. In A9 I have a day of the week it could be any day formatted as dddd In A11 I have the 1st day of the month 01/01/2007 formatted as ddd/yyyy I need a formulae that will look at the number in A8 i.e. 2 Then look at the day in A9 i.e. Tuesday Then look at the month in A11 i.e. January Based on all of that I want it to return the date of the 2nd Tuesday in January 2007 in B11. In a five week month I need it to return the last Tuesday of the month. Weeks per month are show in starting in D11 for January.
View Replies!
View Related
Compare General Number To Date - Display Based On Criteria
I would like to create a formula that compares a number in one cell to the dates I have displayed in two different cells. If true, then I want it to display the Currency value from another cell. ______A________B________C________D_____ |1| Due Date | Amount | 1/01/2007 | 1/15/2007 |2|___4________$98_______________________ A2 is the DAY it's due B2 is the AMT that is due I can create an IF...THEN statement where if A2 is >= C1 BUT less than D1 then the value is B2, BUT it only works if I change A2 to an actual date which means i have to change it every month...which would not help with forecasting future transactions. So in the example above, the value would be in C2 and not D2.
View Replies!
View Related
Compare Any Date To Today's Date In Code
With the expiry date as currently set, the code should show the second message box but it shows the first instead. Sub datechange() Dim expiry As Date Dim now As Date 'This line sets the expiry date as 1/5/2006 expiry = DateSerial(2006, 5, 1) If now < expiry Then MsgBox "Your subscription will expire in May 2007" Else MsgBox "Your subscription has expired" End If End Sub
View Replies!
View Related
Count Of Dates Within Date Range
I've got a 2007 Excel spreadsheet that will count dates within a range using the COUNTIFS function. I am having to send this spreadsheet to users that only have Excel 2003. I need to know how to convert this so it works in 2003. Since I'm doing this for a fiscal year I have to use a date range. Here are my two formulas I'm trying to convert: =COUNTIFS(D9:D25,">3/1/08",D9:D25,"<6/30/08") and =COUNTIFS(D9:D25,">7/1/08",D9:D25,"<6/30/09")
View Replies!
View Related
Date Calculation Across A Range Of Dates
I am attaching an Excel file where I am trying to calculate lead time (even if a negative number of days) to a next activity based on projected dates based on a 'cycle start date'. I am trying to perform this with e complicated IIF statement which you can see from the attached file. Note: this file is created from a vb.net application at runtime where this excel file is actually an xlt template. I attached it as an xls to make it easier to look at. EDIT: I have a flag in the Annual/Semi-Annual that blanks out cells that are not needed if Annual. It causes my LeadTime Col. to blow chunks and I can't seem to get past an error in the formula since adding this. =If(F3>=NOW(),F3-NOW(),If(G3>=NOW(),G3-NOW(),If(H3>=NOW(),H3-NOW(),If(I3>=NOW(),I3-NOW(),If(J3>=NOW(),J3-NOW(),"CycleStart Null"))))). Replaced Zip file
View Replies!
View Related
Date Range: Reference A Single Date And Output Date Ranges
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like: Monday Date: 10/13/08 October 19 – October 25 Sunday 19 Monday 20 Tuesday 21 Wednesday 22 Thursday 23 Friday 24 Saturday 25 and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
View Replies!
View Related
Formula To Compare A Given Date To Todays Date
way to have the vehicle registration date compared to todays date and have it return either due next month, due or over due. Todays date is in format month/day/year, registration is only by month/year. Todays date is in fixed location in worksheet updated by function Today() Basically a formula that resembles =If(registration date < todays date, overdue, If( registration date = todays date, due, If(registration date = todays date+1month, next month, If( registration date > todays date + 1 month, 0))))
View Replies!
View Related
The Next 12 Month End Dates Based On Today's Date
I am trying to project the next 12 month-end dates, based on today's date. I can do that using the EOMONTH function ... see exhibit below ... present month, 1 month out, 2 months out, last month. However, this workbook must be sent to many people and many of those folks will not have EOMONTH functionality because that requires the Analysis Toolpak functions to be added in. How can I accomplish this using standard Excel functions? Present Month >>> =DATE(YEAR(NOW()),MONTH(NOW()),1) One Month Out >>> =DATE(YEAR(EOMONTH(NOW(),1)),MONTH(EOMONTH(NOW(),1)),1) Two Months Out >>> =DATE(YEAR(EOMONTH(NOW(),2)),MONTH(EOMONTH(NOW(),2)),1) Eleven Months Out >>> =DATE(YEAR(EOMONTH(NOW(),11)),MONTH(EOMONTH(NOW(),11)),1)
View Replies!
View Related
SumIF With Dates: SUM All Expenses After The Posted Date Including That Date
In the expense log, Column C is a list of Dates and Column I is a list of expenses. I want to Sum the expenses in the 'Expense Log 09' to a new sheet based on a Date entered in H24 on the new sheet. I have tried the formula as shown below and Get the result #NAME? =SUM(IF(Expense Log 'Expenses Log 09'!C8:C100,H24,'Expenses Log 09'!I8:I100)). I would Like to SUM all expenses After the posted date including that date.
View Replies!
View Related
Sum Year To Date Based On Month Chosen, Rank Values & Compare Rankings
1. I would like to be able to select a month from a drop down ( cell C4), and for Column B ('Cumulative Performance') to reflect the sum for each name between Jan and the month selected. 2. In Column D I would like to rank the relative position of the sum total; such that if I selected 'Dec', John would display '13' in D7, Anne '3' etc. 3. In Column E I would like to show by way of a coloured arrow (or even a smilie icon) the relative change in ranking of the sum totals evaluated for my chosen month with those calculated up until the previous month (e.g. for Anne, if I select June, the Jan to June total is 36 (rank 2 in the June total's), the May to Jan total for Anne is 32 (rank 1), therefore her relative rank movement between the June and May cumulatives moves down and cell E8 would show a red-down arrow (amber horizontal for no change and green up-arrow for an improvement in rank).
View Replies!
View Related
Return A Date Based On Year / Month
formula off here i use all the time relating to finding and sumproducts for specific months and years i.e. Jan 2008, Dec 2007.. depending on these dates excel searched through a specified range and returned me any values i wanted like No. of occurences, totals, sums etc etc it was a sumproduct formula... is there any way i could specifiy a date i.e. Jan 2009, which would search column a and return the date /and/or an account number in column b, only if the date was during jan 2009? The reason i want this is to use a lookup on the account numbers to return specific items of info, but i only need the account numbers if they occurred in specific months which i want to choose.
View Replies!
View Related
VBA - Generate Date Range Within 2 Supplied Dates
First I would like to thank you for taking the time to assist me. My issue is a follows: I want to have 2 dates (beginning and ending) input on one sheet. With these 2 dates entered, I want to generate a date range between them but have it output on a different worksheet. Here is the function that first pulls the date values entered:
View Replies!
View Related
Using VB To Find A Range Based On Todays Date And Todays Date +30
1 column in my sheet is a list of dates (affectively a calendar). I am trying to create a macro that will only display rows 1-5 and then current the current date and the next 30 days and hide all other rows. The approach I have tried is to use “ADDRESS(MATCH(BS40,$B$1:$B$462,0),2)” equation to find the cell with todays date in it (Cell BS40 contains todays date). This was repeated for todays date +30. The problem I have is that although I now have the cell address’s located I cannot reference their values in a range.select What I want to do is somwthing like this:
View Replies!
View Related
VLookup Date Range And Return Multi Lines
I have a large table in the final tab of my excel book. This table contains data such as Company name, contact details, etc but also a date which I must contact them on (this is nothing sinister, just a curtsy call following a job ). The problem I am having is that I am running a vlookup on the first tab on a cell referring to todays date. This only brings shows one record which is the first occurrence of this date. This isn't very useful to me The problems I need solving are: I would like to be able to vlookup a range of dates (i.e. 7 days before or after todays date) - how do it do this? I would also like to be able to return multiple results (i.e. if there is more than one company within that date range I would like them to show).
View Replies!
View Related
Compare Date Within Date Ranges
I want to have a new macro/button to redo the chart cells based on the dates in cols T and U (abt 400 entries). T has the start date and U has the end date. Row 9 - X9: CJ9 have dates for about 10 months (weekdays only) Column J have either of these two values: A or B Column C has either of these two values: C or blank I would envisage it going through each row, checking: If date at top of that col was between the dates in cols T & U then if col J = 'A' then set cell to black block else if col J = 'B' then if col C = C (closed) then set cell to red block else set cell to blue block
View Replies!
View Related
Lookup With Multiple Criteria: Return The Amount Paid And Full Cost Based On The Person's Name And The Date
I would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate. Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
View Replies!
View Related
Avg Based On Date Range
I am diabetic and track my blood sugar on a spread sheet I created. Each month is a page named for the month and year. ( ie: may07, June07 etc ) The last page is my averages page. I monitor averages from the begining as well as several 'last 3 month' statistics. At this time I have to go in each month and change the months on the '3 month averages' formulas then add a month to the 'over all' formula. I want to use a formula that will simply look at the last 3 months without having to manually change the months as well as the 'overall' formula automatically calculating "all" months without adding a new month every month. And last but not least, I have some sub-total boxes giving a div by zero error with blank cells. What am I doing wrong? Not all boxes do this even though the code is copied and pasted so they all 'appear' identical. Rather than try to paste my code here you can see my spreadsheet at [url]
View Replies!
View Related
Countif Based On A Date Range
I have 2 columns, one containing a piece of data and one containing dates. I want to count how many times the data is in the first column, based on a specific date range in the 2nd column. I have attached a sample SSF with a better explanation inside it.
View Replies!
View Related
Count Based On Date Range
I have one worksheet with 2 columns: A - Dates, B - User IDs. In another worksheet I would like to have two columns: A - User IDs and B - Count. The count in Worksheet2, column B would be a count of how many instances the user ID in Worksheet1 appears before or on a certain date. Example:..................
View Replies!
View Related
Average Based On Date Range
Having trouble working out a macro for this... Column B with dates and column C with values. I'd like to make another column with the cell value averages based on the date. In essence, calculating daily averages. In turn I will later be adapting it to go through the all sheets in all workbooks.
View Replies!
View Related
Selecting Range Based On Date
On sheet 1 in cell A2 I have a date (2/22/07). On sheet 2 I have 4 columns of data...column A has consecutive dates. I am looking for a code that will select the range that begins with the week beginning date of the date that was inputted on sheet 1 and the week ending date. For example, the code will select the range 2/19/07 to 2/25/07 (A20:D26).
View Replies!
View Related
Number Of Days To Add To Date Based On Weekday Of Date
I need to create a formula that states a delivery date when the order date is entered in an adjacent column. Items ordered on Monday, Tuesday and Wednesday will be delivered the Friday of the following week, eg. ordered 23rd April 2008, delivered on the 2nd of May 2008. Items ordered on Thursday or Friday will be delivered on a Friday 2 weeks later, eg. ordered on the 24th April, delivered on the 9th of May 2008
View Replies!
View Related
Conditional Format Range Based On Date
I have a monthly calender, with each month on its own sheet. I have a sheet named Holidays, which list the holidays. I have been able to use conditional format and highlight the dates in the months the holidays fall on, but I would like to highlight a range of cells below the date on monthly sheet. I have attached a sample of what I have and would like to achieve. I am not much good at using VBA, but would not be against using it either.
View Replies!
View Related
Selecting A Range Based On Date Within That Range
What i'm trying to do is select a range based on the date which happens to be in the first column of the range. For example, I have a column (A) that contains dates and column (B) that contains names. Its easy enough to select the entire range using Range("A1:B4").Select I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
View Replies!
View Related
Maximum And Minimum Formulas Based On Date Range
I have a spreadsheet with two columns - column A contains dates and column B has the corresponding data (always numbers). The data is not uniform (i.e there may be lots of entries in any given day and none over the next few). The data is always sorted in chronological order. I want to set up a summary table to show the min, mean, median, max for each week. I have set up an array to calculate the mean, but I am having trouble working out a good way of gettting the others short of having a set of columns that manually define each cell...for instance =min(b3:b27) or =min(b28:b30).
View Replies!
View Related
Pull Data Out Of A Closed File Based On A Date Range
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log. The range would be for 7 days and would have to be able to choose a few columns off this report.
View Replies!
View Related
Restrict Date Entry To Be With Date Range/Scope
I'm having a problem with data validation. I set an entire column so that it could only be a date between the first date in the list and the current date. I tested a few cells to make sure that it was working the way I wanted and I noticed that it allows a random number like 3 or 5 to be input after row 50. This would create a date in the 1900s. Why is this happening and how can I stop it.
View Replies!
View Related
Find Start Date And End Date In Range
This is a sub that uses the Find method to find a series of dates and copy them to another worksheet. The following error comes up: Object variable or With block variable not set. I have tried using a set command etc. but other errors end up coming up. Private Sub CommandButton7_Click() On Error Goto errorHandler Dim startDate As String Dim stopDate As String Dim startRow As Integer Dim stopRow As Integer startDate = InputBox("Enter the Start Date: (mm/dd/yy)") If startDate = "" Then End stopDate = InputBox("Enter the Stop Date: (mm/dd/yy)") If stopDate = "" Then End 'startDate = Format(startDate, "mm/??/yy") 'stopDate = Format(stopDate, "mm/??/yy") startRow = Me.Columns("A").Find(startDate, _ LookIn:=xlValues, lookat:=xlWhole).Row stopRow = Me.Columns("A").Find(stopDate, _ LookIn:=xlValues, lookat:=xlWhole).Row Me. Range("A" & startRow & ":A" & stopRow).Copy _ Destination:=Worksheets("Report").Range("A1") End errorHandler: MsgBox "There has been an error: " & Error() & Chr(13) _ & "Ending Sub.......Please try again", 48 End Sub
View Replies!
View Related
VBA To Generate Row For Each Date In Date Range
I've created a userform to track attendance. The code below creates entries based on the activities undertaken on that day; one row for each activity reflecting Name, ID, date, Activity and comments. The intent is that several activities can be undertaking on a day, and the code generates separate rows for each activity....
View Replies!
View Related
Delete Rows If Cell Contains Date Outside Date Range
I've found similar queries on the site, but none seem to handle multiple dates, and my attempts so far have been futile! Requirement: I press a button on Sheet1 and am prompted to enter a start date and an end date. Depending on the dates I enter, all rows on Sheet2 which fall outside the Start/End date range will be deleted. All dates to be checked against on Sheet2 are in a single column, and all rows are populated, there are no blanks. Dates are in the format dd/mm/yy
View Replies!
View Related
Week Number For Date Relative To Date Range
Is there a UDF that can determine the number of weeks for a date range specific that is not relative to the week number for the year but for the date range itself. i am aware of the weeknum function but this is for week number relative to the year. eg. date range 01/03/2008 - 31/05/2008 has approx 12 weeks and 14/05/2008 will be week number 10 for the range.
View Replies!
View Related
Round Date Based On Day Of Date
I am trying to make a spreadsheet that will calculate how long someone has been working for us but what i need is for the date started to be rounded to the start of the nearest month. (ie. Start Date: Jan. 1 - 15, = Jan 1. and Start Date: Jan.15 - Feb.15 = Feb. 1....). Is there a way to do this? I figure i may have to use some sort of table but i dont know which one to use or how to use it.
View Replies!
View Related
Count Dates & String Dates After Given Date
The attached workbook has dates in column C, although some of these dates are just strings. I'm trying to write some vba that will tell me how many of the cells in column C contain a date (or looks like a date) that is greater than (after) the real date in cell G1. At the moment I loop through the cells in column C and can ascertain, which dates can be counted, then copy one row over at a time, but I'm looking for a slicker (perhaps one-liner) answer, perhaps by copying a block of rows in one go. The aim is to copy those rows to another sheet. There are many more rows than in the attached, and many sheets to process, and I have no control over the format of the dates/strings in column C. Currently it takes about 20 seconds to copy over the necessary rows, but I'm looking for it to happen much more quickly; current thoughts are to sort on column C (sorting on column C anything that looks like a number as a number - which has it's own problems!), have a count of dates satisfying the criterion (say using a worksheet formula such as COUNTIF or SUMPRODUCT, perhaps also using EVALUATE) then copy a block of rows in one go. not very relevant, but the existing code is something like this which highlights rather than copyies the rows(included in the attached): ...
View Replies!
View Related
Copy Data Based On Date Range Put In By User For Report
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post. Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
View Replies!
View Related
|
TRACKER
