Specific Cells Imported To New WorkBook
Oct 13, 2009
I work with a machine that takes readings and exports them into an unorganized Excel file along with irrelevant data. What I need to do is create a macro that will import only specific data and place it where I want it.
I only need to go from File A to File B, so no complex data compilation from multiple workbooks [at this time!] What may be an issue, however, is that there is no set number of data entries. It could be anywhere from 1 to 500 depending on the sample. What I'm hoping is that since the samples are added in a set pattern that it will possible to accomplish this. I've attached an excel file with two sheets. Sheet one is to represent the data file that is extracted from the machine and sheet two is a mockup template demonstrating how I want the data organized in the new file after import
View 4 Replies
ADVERTISEMENT
Nov 20, 2007
I am using the following code to import a number of text documents into the same workbook, on seperate sheets and then to save the workbook as an excel file. the problem is that when the file tries to save (red section) I get a message telling me that Excel can not save the workbook in the requested format, I think because it is still trying to save them as text files rather than as an excel workbook. When I try to save manually, selecting .xls as the format it works fine, but I would really like this to be part of the macro to ensure the WB is saved.
Sub ImportFiles()
Dim Sfile As String
Dim count As Integer
Dim ans As String
Dim A As Integer
Dim FileSaveName As String
count = 0
Application.DisplayAlerts = False
Do
' Allow user to select the file to open, text files only
Sfile = Application. GetOpenFilename("Text Files(*.txt), *.txt")
' Check that a file has been selected
If Sfile <> "False" Then......................
View 4 Replies
View Related
Jul 14, 2007
I have a sheet with 200 sheets in called workbook x , I need to create a summary new workbook with only data on 1 sheet.
I want to pull specific cells from the large workbook x to 1 single sheet on a summary workbook:
A6 I want to be surname taken from B1 of workbook x
B6 will be first name taken from C1 of workbook x
Then I will copy data from M1 on mastersheet to cell C6 on new workbook
Then I want to copy Row A11 up to T11 and paste on the new workbook (Summary) in D6 staying in the row 6
Not sure if this is the tricky bit I want to repeat as above B11 to T11 but paste in the next empty cell of the same row of D in my summary
I need to repeat this action upto A23 to T23
Then I need it to move on to the next sheet in X and repeat all the steps above but do it on the next row down row 7 and so on
View 9 Replies
View Related
Oct 18, 2011
I have imported data and it shows "Check 1234". How can I use a formula to remove "check" from this cell?
View 3 Replies
View Related
Mar 22, 2013
I am trying to create a VBA to:
1. Search workbook for a specific values and then to color that cell with a corresponding color.
2. Search workbook for a specific values and then color other cells underneath (the next 3 merged rows after the cell containing the value) with a corresponding color.
View 3 Replies
View Related
May 25, 2014
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1
Title 2
Title 3
Title 4
Title 5
A2
B2
C2
D2
E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook #
File 2
File 3
File 4
A2
Title 5
A3
Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
VB:
Sub dAmacro()
Sheets("Workbook1").Select
Range("G1") = "Workbook #"
Range("H1") = "File 2"
Range("I1") = "File 3"
[Code] .....
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
View 9 Replies
View Related
Aug 13, 2013
I have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
View 2 Replies
View Related
Jan 30, 2013
I have spreadsheet of data, I need to extract any rows that have blanks cells in columns F or P or T.
If possible I would like a macro I could run that would cut all of the rows that meet the above criteria and paste them in to a separate sheet.
View 2 Replies
View Related
Feb 21, 2006
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
View 14 Replies
View Related
Feb 23, 2014
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies
View Related
Feb 19, 2014
I have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies
View Related
Mar 6, 2014
My requirement is as follows......
I want to get a copy of worksheet from specific workbook to active work book in which i want a copy of sheet get moved.
View 2 Replies
View Related
Apr 25, 2013
I have a workbook that is used to calculate values from various data etc. On completion of calculating the values, eg. £20,000, I want to put the values into specific cells of another workbook template. I can of course do it manually by selecting the cell of the template workbook and do an = then reference the the cell in the calculating workbook.
What I want to happen when all the calculations are complete is that:
1. A new workbook, based on the template, is opened and saved with an appropriate title
2 The values from the calculating workbook are automatically entered into the new (saved) workbook at specific cells
View 1 Replies
View Related
Nov 7, 2008
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
View 9 Replies
View Related
Oct 9, 2009
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies
View Related
Apr 30, 2007
I'm trying to use a conditional format on a range of cells so that if there is more than 1 "A" contained in any given row, the cells containing the "A"s are highlighted (e.g. red)
I've tried:
=COUNTIF(B2:K4,"A")>1
but it doesnt work & now I'm stuck.
View 9 Replies
View Related
Feb 15, 2010
Entered data was missing when he tried to run a report. I've figured out he had other Excel workbooks open and that maybe where some of the data's gone there. How do i make the modules and code in Workbook A only run in Workbook A?
View 9 Replies
View Related
Jun 23, 2014
I have 2 Workbooks A and B
I now would like to copy the entire row X from Workbook A to Workbook B.
Row X has to be selected: In Cell "C5" of Workbook B is a Number 12345. There is only one Row in Workbook A which has this number in column A.
So, Select the Row in Workbook A which starts with the equialent Number of C5 in Workbook B and Copy it.
View 3 Replies
View Related
Jun 6, 2008
I have a workbook with sensitive company information. I need a way to validate the computer the workbook is being opened on and then close the workbook if it is not a confirmed workstation.
The file is already password protected on opening, each worksheet and the workbook is protected, and the VBA code is protected. We just need to take it one step further.
Is there a way to check a registry entry or the computers MAC address on workbook_open?
I have found code to close the workbook without saving which I would use after a message box stating "You do not have permission to access this file."
If someone has their macro security level set to high or very high, that prevents my code from running. How can I make this work on any computer no matter what their macro settings are?
View 9 Replies
View Related
Jul 30, 2014
VB code, recorded by macro, it is working, but I need create different workbooks with different names , this one create just one specific name here is the first problem , second would be for saving in desktop folder "Ataskaitos" here another because it just for my computer , on other computer directory would not be found and third , then I deleting existing sheet in workbook from there I run the macro and copy sheet to new workbook it asking if I sure want to delete that sheet, so I don't need asking that I just need to delete it
VB:
Sheets("Ruooinys" & i).Select
ActiveSheet.Cells.Select
Selection.Copy
Workbooks.Add
ActiveSheet.Cells.Select
[Code] .....
View 2 Replies
View Related
Dec 11, 2013
I'm trying to link specific data from one workbook to another. So from the demo I've attahced, I need all of the 3rd row "ATP BASIC SERVICE : 1" to be linked to another workbook.
So normaly I could copy the row, go to the other workbook, "paste special" and link it to a column.
The only problem is the "ATP BASIC SERVICE : 1" data will not always be on the 3rd row.
So i assume I would need to automatically search for "ATP BASIC SERVICE : 1" and if it is found, copy the column over to the other workbook.
View 4 Replies
View Related
Aug 30, 2013
I have a work book with many sheets and staff continue to mess this up so I would like to know how I can have a specific sheet called Instructions open when this workbook is opened preferably no macro's is this possible
View 7 Replies
View Related
Sep 16, 2013
How to create a hyperlink to a specific sheet in a different workbook.
Both workbooks are located on the same drive if that makes any difference.
View 3 Replies
View Related
Feb 18, 2014
I'm trying to import a range of cells from one workbook to another. I've got this far with it but am getting a Runtime Error '1004'.
Sub ImportData()
Application.ScreenUpdating = False
Set wb1 = ActiveWorkbook
[Code].....
View 3 Replies
View Related
Oct 2, 2007
to open a workbook at a specific time. I want to beable to flip my computer on at 8:50am, go grab some coffee and then at 9:00:00am have my workbook open and performing tasks. Besides turning on my computer, I dont want to have to open or activate anything prior to having my workbook open. However if there is code to turn on my computer from a sedative state that would be great too.
View 9 Replies
View Related
Dec 28, 2011
This is a shot in the dark. I have a workbook with 12 sheets, one for each month of the year. Each month is divided into the different weeks of the month. For example sheet January is divided into:
Week 1: 1/1/12 through 1/7/12
Week 2: 1/8/12 through 1/14/12
and so on:
I would like my workbook to open on the cell containing the date range for that particular date.
For example, if I open the workbook on 1/10/12 I need the workbook to open on the cell range that contains Week 2: 1/8/12 through 1/14/12.
View 4 Replies
View Related
Oct 27, 2007
Looking for For Loop to loop through 5 specific worksheets in a work book.
Something like this, but can't find right syntax:
For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter
View 4 Replies
View Related
Jun 18, 2008
Need to have a particular workbook open at a specific time...
I wrote this and placed it in a Personal.xls module, did not run automatically. I then placed the 2nd SUB() in the "This Workbook" and nothing. Where or how is the proper way to run this...
----------------------------
Sub Open_IndexAnalysis()
Workbooks.Open Filename:="e:Index Analysis.xls"
End Sub
------------------------------
Sub Run_OpenIndexAnalysis()
Application.OnTime TimeValue("09:40:00"), "Open_IndexAnalysis"
End Sub
-----------------------
View 9 Replies
View Related
Apr 4, 2009
I have a workwook with multiple sheets. One of the sheet name is "ABC".
I have a macro which does a particular task. I want that when the macro is run, it should run on all the sheets of the workbook except sheet "ABC".
Here is whar I have tried:
Sheets("ABC").Activate
For Each ws In ActiveWorkbook.Worksheets
If ws.Name ActiveSheet.Name Then
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
End If
View 9 Replies
View Related
Aug 17, 2008
Problem: I want a macro to detect if a workbook is open so I can skip the workbook and move onto the next item. I do not want the user to be prompted in any way. I do not want the workbook to be shared. I simply want to pass over the workbook (but be aware I have passed it over).
--Long Version--
About forty team members have their own workbooks and at day’s end the team leader uses a macro to poll each team member’s workbook in turn to gather work results. When gathering these results the macro also needs to write some admin data to each workbook.
I am aware of the workbook sharing option in Excel, but I am wary of using it. It is not a show stopper if a team member’s workbook is already open and work is not gathered on a particular day – we’ll get it the next day. I just need to be able to trap the event and manage it. The central command I use to access a team member’s workbook is :
Workbooks.Open FileName:=WorkBookName................
View 2 Replies
View Related
