Macro To Copy Specific Cells From Row From Source & Stop When Next Row Cell = Specific Value
Nov 7, 2008
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
View 9 Replies
ADVERTISEMENT
Apr 7, 2009
What I'd like to do is copy text down in column A but when a cell in column C says something like 'end of data' I'd like the copy to pick up the next row in Column A and copy down until 'end of data' and so on.
Or maybe copy text down in Column A until the text changes in col A.
View 7 Replies
View Related
Mar 20, 2013
I need my macro to stop running 5 rows before an empty row. I have numerical data in cell BE, and a running summation of the numerical data in cell BI.
The last 4 rows of the group of data are subtotal/total rows, followed by an empty row separating this group of data from the next.
I would like the summation to start at the row of my active cell and continue to populate column BI with the running summation of column BE, but stop 5 rows before an empty row at the bottom of the group of data.
View 3 Replies
View Related
May 21, 2014
I have the following code, that searches the entire workbook. I came across an issue when searching for terms that are on my main page where my search results appear.
Code:
Public Sub Find_box()
Dim ws As Worksheet, Found As Range, rngNm As String
Dim myText As String, FirstAddress As String, thisLoc As String
Dim AddressStr As String, foundNum As Integer
[Code].....
View 2 Replies
View Related
Feb 24, 2012
I have a simple macro that copies data from worksheet to another. I only want this macro to be run once per day by the user. One of the cells that gets copied is the value found in the formula "=today()". My thought is that the macro could look for the existance of the current date in the pasted data (meaning the macro has already been run once today), and if the date = today, then a message pops up warning the user that the macro has already been run once today, and ask if they're sure they want to continue.
Any easy way to accomplish what I'm attempting to do? The current date gets pasted into a worksheet name "PriorDay" in cell C5.
View 2 Replies
View Related
Jan 30, 2013
I have spreadsheet of data, I need to extract any rows that have blanks cells in columns F or P or T.
If possible I would like a macro I could run that would cut all of the rows that meet the above criteria and paste them in to a separate sheet.
View 2 Replies
View Related
Dec 30, 2011
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
View 9 Replies
View Related
Jul 28, 2006
how I might 'trigger' a macro to run when a certain cell was filled with any value at all. I have the macro working fine (it's a simple copy and paste special) but I want it to run automatically when the cell A20 has a value in it.
View 9 Replies
View Related
Jul 28, 2006
This is the code I have:
Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
View 9 Replies
View Related
Mar 17, 2014
excel.jpg
how to make my network days stop counting when I insert a value in the completed column (in this case H3). I have a Date Received column (A3), a due day column (G3) and the last column with the date (N3). My remaining days column keeps counting after I filled the completed cell (H3) and won't stop counting after. I need a formula to stop after the completed cell is fill up.
View 5 Replies
View Related
Nov 4, 2009
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
View 9 Replies
View Related
Apr 27, 2009
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
View 10 Replies
View Related
Oct 9, 2009
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies
View Related
May 1, 2014
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
View 11 Replies
View Related
Apr 16, 2014
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
View 2 Replies
View Related
Sep 1, 2009
I wrote a macro to create a chart out of a specific range of data.
View 11 Replies
View Related
Apr 4, 2013
Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
View 6 Replies
View Related
Jul 1, 2014
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
View 11 Replies
View Related
Jul 23, 2007
I'm creating a simple program that copy one or more specific cell values and place it on a specific cell in another sheet using loop to make it easier... I'm having a difficult time trying to figure it out..
Example
from sheet1 A1:A5
Sheet1
A | B | C
1 P45
2 P46
3 P47
4 P48
5 P49
and place P45, P47 and P48 on another cell, to be specific in C1,C2 and C3, in a different sheet
Sheet2
A | B | C
1 P45
2 P47
3 P48
4
View 4 Replies
View Related
Sep 14, 2008
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
View 14 Replies
View Related
Apr 3, 2013
I'm trying to copy entire row from sheet "source" to sheet "output".
Condition: If cell or cells in range (E7: lastcoll, lastrow) value is "A" then copy entire row.
Find the excel template in attachment.
My problem is that my macro is copying particular row, as many times as many "A" finds.
I want to copy entire row just once doesn't matter how many cells with "A" are in particular row.
VB:
'function to find last column a change letter of column to number
Private Function ColLetter(LastCol)
ColLetter = Split(Cells(1, LastCol).Address, "$")(1)
End Function
[Code] .....
copyROW.xlsm
View 3 Replies
View Related
Dec 27, 2013
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
View 4 Replies
View Related
Mar 13, 2014
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
View 2 Replies
View Related
Jan 22, 2009
I want a macro that if a certain cell on a row in column F on my worksheet is "6" then copy the cell in columns B and H on the same row are to be copied into an array and then when the loop is done, display the copied cells in a msgbox.
Is there a simpler way to do this without fidgeting with an array?
View 5 Replies
View Related
May 11, 2009
copy specific cells from Sheet2 to Sheet1. How would I change this macro if I wanted to copy all of Column B from Sheet2 to Sheet1
View 2 Replies
View Related
Oct 28, 2009
This Macro is supposed to get certain totals for me from diffrent pages. Instead of selecting an entire row I want to select specific cells, so when it finds the word total on the sheet, whose location can change often it will return the value two cells away.
View 3 Replies
View Related
Jun 6, 2013
I want a macro that will save a copy of the current file using specific naming convention. My file is called OTR2CMMASTER - I want the macro to save a copy as OTR2CMSAGE(CURRENTMONTH/YEAR). The OTR2 is a named field (ProjectCode) in the workbook.
View 5 Replies
View Related
Jan 20, 2009
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
View 3 Replies
View Related
Mar 7, 2012
I want some VBA code that will:
1) automatically check the active row to see if it contains specific text (i dont' care if there is other stuff in the cell or cells), such as "truck 1 blahblahblah" and checks for specific font color, such as green.
2) if the row does, then I want it to copy ALL the cells in the active row EXCEPT Column A (which contains the date), and then paste them twice, one 21 rows down from the active row, and one 35 rows down from the active row.
3) Once copied and pasted, modify the pasted cells slightly. The first pasted cells need to say Truck 2 blahblahblah in Column C and be in blue font (instead of the original Truck 1 blahblahblah in Green Font), the second needs to say Truck 3 blahblahblah and be in yellow font. Everything else that was pasted will be the same EXCEPT they will be in blue or yellow font.
View 2 Replies
View Related
Apr 30, 2006
Is there a way to copy then paste specific cells from closed .xls files in one directory ( more than 500 files ), and how, if all files are with one known password protection( my own files ).
View 9 Replies
View Related
