Looking for For Loop to loop through 5 specific worksheets in a work book.
Something like this, but can't find right syntax:
For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter
Where i want to carry out a find and replace specific to different worksheets.
At the moment i have:
Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range
Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")
[Code] ........
Where column A contains the tab name, column B contains what to replace and column C contains the replacement.
I have the following macro:
[Code] .....
So right now the macro is run in every single worksheet in the workbook. Unfortunately, it appears the TRIM function erases formulas in cells. I want this macro to apply only to certain worksheets. Say the worksheets i want the macro to run on are named A1-A100.
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
I have an excel workbook with about 40 worksheets. I have a formula in A1 of each sheet that returns a 1 or a 0 depending on whether or not the name of the worksheet is in a list.
What I am trying to do is create a macro that will print all worksheets that have a 1 in A1.
I have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
View 2 Replies View RelatedI wrote a macro to loop through all of the worksheets in a work book and print all of the sheets except the first one labeled as "BidCandidates" and the last sheet labeled as "Blank".
It works just fine. However, I want it to work even when there is no first sheet labeled as "BidCandidates" and last sheet labeled as "Blank". There will be an unknown number of sheets to print and they will all have a label starting with a number from "02" through "50". For Example "02 - Selective Demolition".
Here is the code I have written;
Sub Print_All_Analysis_Sheets()
'
' Print_All_Analysis_Sheets Macro
'
'
Application.ScreenUpdating = False
Sheets("BidCandidates").Select
ActiveSheet.Next.Select
[Code]...
I am trying to figure out a way to do the following: I have multiple worksheets with 2 columns of data. The data contains name and value, so 2 columns is all I would be looping through.
I need to loop through the multiple worksheets and add any values that are similar to the particular name.
I'm trying to loop through all visible worksheets and then when im those worksheets, I want to run a simple macro.
Here's the code I have:
Sub formatting()
Module10.Part5
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Module12.Part6
Next ws
End Sub
The problem I'm encountering is that the macro(Module12.Part6) keeps running in the ActiveSheet (the sheet i have open) and isn't actually looping through the worksheets.
Is there any easier or better way to apply a macro to all visible worksheets?
Why wont this loop thru all worksheets? It seems it runs worksheet named "Monday Wk (1)" for each sheet and no others.
View 9 Replies View RelatedThe code should go through each worksheet and if the row in column A has a null value or 0, then delete the row. The count is based off of column T. The row deletion portion of the code works, but something is wrong with my worksheet looping structure.
View 5 Replies View RelatedCode to loop through worksheets 1 to 3 only and perform a certain task, and how to define the variables i.e. worksheets 1 to 3 when I am not using actual sheet numbers, but tab names. (worksheet 1 to 3 is just the positionof each tab).
What i need the code to do is perform a task on the first sheet, loop to the next sheet, perform the same task, until it has done the 3rd sheet.
The problem with the code below is that it re-prompts the input box for each worksheet that the macro runs through.
What I would like to happen is the Input box appear at the begin, and that value is stored and then the same value pasted into A2 on each worksheet.
Code:
Dim ws As Worksheet
For Each ws In Worksheets
Rows("1:1").Insert Shift:=xlDown
[Code]....
I'm getting an "Invalid or Unqualified Reference" error at the 'division=.cells' line when I try to go through each worksheet and paste some info from there onto a summary sheet. I know there is probably a simple solution that I am oblivious to.
Code:
For Each sheet In ThisWorkbook.Worksheets
i = 1
division = .Cells(2, 1)
[Code].....
I am trying to write code that will loop through one sheet, fill an array and then use that array to populate cells in another sheet. I have a sheet with group names in column A, then in column B through Column IV there are the members of that group. There may be no members in a group or every cell through Column IV could contain data. I need to loop through each row, one at a time, see if a cell contains data, if it does, put it in the array, if it's empty then the array is done for that row. I then need it to go to another sheet and dump that data, however, now it needs to drop it in five consecutive cells in a row, then drop to the next row for the next five cells, etc.
Once this is done it then goes back to the first sheet, drops to the next row nad starts over.
I know how to loop through the rows, I just am not sure how to fill an array using variables for rows and columns. i.e., I can't say fill array with b1 to b30 instead I have to say fill array with intRow,intFirstColumn through intRow, intLastcolumn.
I'm trying to go through a workbook and, based on some user inputs, hide certain sheets and charts (these charts are their own tab, i.e. a chart object). Here's a sample code I wrote for a dummy workbook I have. Unfortunately it doesn't work, I think because the loops are nested. However if I can figure out how to fix this code I can easily adapt it to my other real problem.
View 2 Replies View RelatedI'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies View RelatedI have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies View RelatedI have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies View RelatedMy requirement is as follows......
I want to get a copy of worksheet from specific workbook to active work book in which i want a copy of sheet get moved.
I am trying to code a Macro so that i can take all the worsheets and save them as individual Workbooks. I wrote a macro that appeared to work, but, after it saves the first sheet as a workbook, i get a debug error.
MS VB Script error:
Runtime error '9':
Subscript out of range
Any advise would be greatly appreciated.
Thank you
Code is below..
Sub saveall()
'
'
For Each ws In ActiveWorkbook.Worksheets
ThisFN = "C:Documents and SettingsUserDesktop" & ws.Name & ".xls"
I = I + 1
Sheets(I).Select
Sheets(I).Move
ActiveWorkbook.SaveAs Filename:= _
ThisFN, FileFormat:=xlNormal, _
Password:="", WriteResPassword:="", ReadOnlyRecommended:=False, _
CreateBackup:=False
Next ws
End Sub
I have a workbook that is used to calculate values from various data etc. On completion of calculating the values, eg. £20,000, I want to put the values into specific cells of another workbook template. I can of course do it manually by selecting the cell of the template workbook and do an = then reference the the cell in the calculating workbook.
What I want to happen when all the calculations are complete is that:
1. A new workbook, based on the template, is opened and saved with an appropriate title
2 The values from the calculating workbook are automatically entered into the new (saved) workbook at specific cells
I have the following code that lists all the worksheets in workbook. I would like to have this list show only the worksheets that end in "SD". (For example, it would show "MainSD" or "CantonSD" but not "Main".)
View 14 Replies View RelatedI would like to use VBA to combine specific sheets. I have a workbook containing about 15 sheets but want to combine 6 specific sheets. All the sheets have the exact same headers and number of columns but the number of rows are different.
I found this VBA code that works but it combines ALL of the sheets in the workbook. How to modify this to combine specific sheets. How to combine all visible sheets if that's possible.
Here is the code I found...
Sub CopyFromWorksheets()
Dim wrk As Workbook 'Workbook object - Always good to work with object variables
Dim sht As Worksheet 'Object for handling worksheets in loop
Dim trg As Worksheet 'Master Worksheet
Dim rng As Range 'Range object
[Code] .........
I have tried Sheets("").Select to just have the macro work on any worksheet in a workbook not just on the specific worksheet (i.e.Sheets("4474-60-2").Select . Get an error though.
View 9 Replies View RelatedI have two worksheets. On one worksheet under column G I have hundreds of random numbers, but I only want to extract a specific half. In the second worksheet I have two columns A and B. Column A has the exact numbers that I want to extract from Column G. I would like to get the numbers from Sheet 1 under column G listed under Sheet 2 Column B in reference to Column A.
View 9 Replies View RelatedI have five worksheets hidden in my workbook. All of these worksheets have either "Yes" or "No" written in cell C4. (3-yes, 2-no)
I also have a search bar in the form of a textbox and a command button.
I want to be able to type "No" in the textbox, click the command button and have the pages with "No" in cell C4 to unhide.
Some screenshots if necessary:
Sheet1 (yes): Gyazo - ce85d71bc03cd2ceaa1030e22445800f.png
Sheet2 (no): Gyazo - 65f876d6e7d749bd1ca25ad957fbda99.png
Sheet3 (yes): Gyazo - 0cb442f1d34e7d744884f73e1afe2646.png
Sheet4 (yes): Gyazo - 6f0ce150322208fd93dc5fc6f4f66481.png
Sheet5 (no): Gyazo - 772f48f8a82e53713794e6655fe56fca.png
master: Gyazo - 1b71470f3de47cef347050588bca819c.png
Let's say I have 6 Worksheets in my Workbook with the following names:
Sheeta1
Sheeta2
Sheeta3
Sheetb1
Sheetb2
Sheetb3
And I have three Subs that I want to run, one Sub for two specific Worksheets.
How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?
As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.
I'm building a spreadsheet which has a formula which performs a vlookup on a sheet. Now I want to leave the vlookup formula so that you don't need to change it. What I want to achieve is that the vlookup table array references a cell in the current worksheet which is a name of another worksheet.
What this will enable me to do is to keep the forumla unchanged by by changing the cell with the worksheet name in it points the vlookup to a different sheet. This is because I have multiple sheets which have similar data on and I don;t want to edit the forumla to point to the different sheets.
I have a spreadsheet of several sheets, but 7 of them (Red, Orange, Yellow, Green, Blue, Purple, Black) are the guts of the file and where I make adjustments. The layout of these sheets is the same, there are several cells of data on each sheet that coordinate with data in the same cell on other sheets. The problem is the sheets are so big, when I change sheets I have to go find the data that was in the same cell (or close) to where I just was on a previous sheet. So for example if on “Red” I am in cell AX253 and I go to sheet “Yellow” I would like it if AX253 would be selected when I get there. And if I select a different cell like D56 on Yellow and pick Green then I want D56 to be automatically selected on Green.
In addition, I plan to use a check box on an eighth sheet called “White” to turn the feature on and off. I have never written code for a check box before.
Is this to terribly difficult to do? I did some searching and saw some code that was similar to this but could not get it to work.