I'm getting an error that I'm not quite clear about. I'm essentially using a fuction that Mr. Leith Ross provided here: http://www.excelforum.com/excel-prog...xt-source.html to grab text from a web page. I want to create 100 rows of data based on the array housing that data using the SPLIT function.
View 2 Replies
I'm running this line (from longer code of course), where i/g are integers and h is a range:
[Code] ......
And I'm getting run time error '1004'.
Because countif cannot be used across multiple tabs, I'm using the following workaround where "MySheets" is the range of tabs and E8 is the cell I want "counted".
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented"))
This works perfectly, except that I really need COUNTIFS... I want Excel to count either "Fully implemented" or "Partially implemented" when in E8. I cannot get the formula to work and keep getting an error message.
=SUMPRODUCT(COUNTIFS(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented",(INDIRECT("'"&MySheets&"'!E8"),"Partially implemented")))
I have the following code (below) which calls a function to return the sum of values in a specific part of the array.
I haven't set the function up correctly as it is causing an object not defined error(424), but I can't see where and have been going round the houses changing it. I'm wondering if it's my confusion over when to use By Val?
Sub getDataIntoArray()
Dim arrDataTot()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
ReDim arrDataTot(1 To 1)
I have an array that is going to have a variable length every time the macro is run. I set a really high length at the beginning and when I want to unload the data, I want to redim the array to only the amount of data that was loaded into the array.
I am getting an error of "Array already dimensioned" when use the redim function near the end of my code below.
Code:
Private Sub Trend_Click()Dim GraphRow As LongDim TodaysYear As Integer,
Adjustment As Integer, EndYear As Integer,
StartYear As IntegerDim X_Axis_Array(1 To 100) As VariantDim SelectedStmt As StringDim X_Axis_ArrayEnd As IntegerTodays
[Code] ........
I am entering the following Nested IF(AND statement into a cell and getting a message stating "You've entered too many arguments for this function." Any idea on what formula I can use to get the needed information into this cell based on the fact that there are different inputs that can be entered into the related cell that will trigger the needed respons in the working cell?
=IF(AND(K1051="Down",L1051<2),"Yes","",IF(AND(K1051="Partially Down",L1051<2),"Yes",""))
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View RelatedSay I have a string, "a test array." I want to split this into an array where each character is an element. I was thinking something like
Dim MyArray As Variant
Dim MyString As String
MyString = "a test array"
MyArray = Split(MyString, "", Len(MyString), vbTextCompare)
But this doesn't work because Split() returns the entire string when the delimiter is a zero-length string.
I set out this morning to count duplicates in an array and report a succinct list.... so I went down the route of using a collection with keys to do this.
1. Is there a better way? Else
2. split my collection values? I'm a bit stuck.
I have a series of values in a collection like this
: Item 2 : "Spam|01/07/2013|1" : Variant/String
: Item 4 : "Chips|01/07/2013|2" : Variant/String
So I have 3 key pieces of data delimited by a pipe sign -
Product | Date | Number of Occurrences
Item 4 is of interest to me because it occurs twice.
How I can turn those collection values into something I can work with, else another approach to sum rows in an array which are duplicates (if you only look at 2 columns).
I have a string which follows this format: "App Alg FMA", "App Pgm FMA", "App Slf FMA" This string can shrink or grow dynamically depending on the number of App*'s selected. How can I split this string and load the App*'s into an Array so the array would contain the following
Array(0) = "App Alg FMA",
Array(1) = "App Pgm FMA",
Array(2) = "App Slf FMA",
How can i split a string of "name*sirname" by the * character. At the end i want to msgbox the both 2 results as "name" and "sirname"
Code:
Private Sub CommandButton1_Click()
Dim myArray() As String 'DEFINE THE ARRAY
i = 0
[Code].....
One of the lines in my VBA code reads as follows
View 4 Replies View RelatedFor some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
I have some quiries on split function. I have a string that I splited using split function
Assume cell A1 has the following string and we declare one variable and assign the string to it.
name="Ramesh-Katta-Mr-Naidu"
Split(name, "-")
It splits based on parameter we supplied that is "-".
name(0)=Rameh
name(1)=Katta
name(2)=Mr
name(3)=Naidu
What will be the value if the cell is empty?
How it will split if the cell value is only "Ramesh"
I do hit the SCE (Shift-CTRL-Enter) keys. The formula does work in one workbook, but not the other. The only difference between the two workbooks is this formula has a larger range.
New Formula- doesn't work (ERROR- #DIV/0!)
{=AVERAGE(IF(Sheet1!A3:A1094="MONDAY",Sheet1!E3:E1094))}
Old Formula- works
{=AVERAGE(IF(B6:B451="MONDAY",E6:E451))}
When I input the formula : =(G9+G16+G23+G30+G37+G44+G51+G58+G65+G72+G79+G86+G93+G100+G107+G114+G121)/17
I get the error message #VALUE!
I have a macro that loops through a column of cells to retrieve a price that is buried in a string. The cells in this column are formatted one of two ways. Either they are completely empty, or the following pattern of string is entered: "$181.27 ea. for 12 on 5/21/14" (the quotes are not part of the string entered). What I need my macro to do is pull out "$181.27" and then drop the dollar sign and then do some more math before inputting a result in a different cell, but the prices range from less than a dollar to over $100,000 so I need to use split instead of left. Should be simple, yes? Here is what I have:
[Code] ......
But I get an error 9: subscript out of range on the line that calculates PriceSplit whenever it encounters a blank cell.
I have a excel sheet where I have a list of strings seperated by a "-". I am looking to take the particular cell value and swap the characters before the dash with the characters after the dash. So for example:
FG03-FJ04 would become FJ04-FG03
AB02-CD12 would become CD12-AB02 and so forth....
I have tried findling around with the split function but cant seem to get anywhere, does anyone know a tried and tested method of doing this?
I have one line of code that I need an error message for:
View 2 Replies View RelatedI get spreadsheets sent to me with hours and minutes in decimal format. Frequently a quarter of an hour or three quarters of an hour are posted as 0.15 or 0.45 instead of 0.25 and 0.75. Other odd fractions can also appear.
I want an error message if the value when divisible by 0.25 is not a whole number.
I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
I would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
I am getting the error message
"Compile Error: End If without block If" for the code below :
ErrorHandlerRoutine:
If MyInteger = 1 Then
MsgBox "Data does not exist in the CO2 data set"
End If
Resume 1
If MyInteger = 2 Then
MsgBox "Data does not exist in the Water data set"
End If
Resume 2
If MyInteger = 3 Then GoTo 3
MsgBox "Data does not exist in the Waste data set"
End If
Resume 3
I need an error message to pop up if 3 cells contain the same data
The range of these cells would be G19 to G49
Ideally the error message would say "Rules Broken"
Also if possible could the same message be shown if the value of cell J52 exceeds 50,000000
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
I am writing some code to do a comparison between two cells X2 or AB2 with an X which checks to:
1. make sure one of the two are filled, or
2. both are not filled.
Below is an extract of the spreadsheet I am working on. I need to check to make sure one of the boxes is checked. If both are empty or both filled with an ("X"), I want a message box to tell me to correct the error and stop the macro from continuing. If only one is marked with an ("X"), I want the macro to continue but don't know how.
RSTUVWXYZAAAB
2IN PROGRESS: COMPLETED:
Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed.
Here is the code for those who may need it....
I've got the below code which I use to log users who opens my spreadsheet. It's a Event so runs when the spreadsheet is open with macro enabled. The spreadsheet is on a shared drive which has the prefix "K". Most users it works find but one user gets a error Message "Path or Drive" error. I got around it by adding "on error" but how do you overcome issues with drive prefixs and the drive address e.g "K" vs "\CRD2000"
Private Sub Workbook_Open()
Open ThisWorkbook.Path & "usage.log" For Append As #1
Print #1, Application.UserName, Now
Close #1
End Sub
I have developed a program in which the user will only see the userforms (and to an certain extent not even be aware of excel doing most of the work).
i am looking for code that will intercept an error message should something go wrong in my vb code. Currently when an error occurs, it pops back to VB and gives the error message. I want it to rather give a popoup message asking the user to contact me.
