I have the following code (below) which calls a function to return the sum of values in a specific part of the array.
I haven't set the function up correctly as it is causing an object not defined error(424), but I can't see where and have been going round the houses changing it. I'm wondering if it's my confusion over when to use By Val?
Sub getDataIntoArray()
Dim arrDataTot()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
I have an array that is going to have a variable length every time the macro is run. I set a really high length at the beginning and when I want to unload the data, I want to redim the array to only the amount of data that was loaded into the array.
I am getting an error of "Array already dimensioned" when use the redim function near the end of my code below.
Code:
Private Sub Trend_Click()Dim GraphRow As LongDim TodaysYear As Integer, Adjustment As Integer, EndYear As Integer, StartYear As IntegerDim X_Axis_Array(1 To 100) As VariantDim SelectedStmt As StringDim X_Axis_ArrayEnd As IntegerTodays
I'm getting an error that I'm not quite clear about. I'm essentially using a fuction that Mr. Leith Ross provided here: http://www.excelforum.com/excel-prog...xt-source.html to grab text from a web page. I want to create 100 rows of data based on the array housing that data using the SPLIT function.
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have come up with the following array UDF to help me split a large list of values into list of smaller groups.
The function takes the 3rd input argument to to understand how many smaller lists it needs to split the bigger range. The 2nd argument simply specifies a seperator, either "," or ";"
On using the same on a worksheet I'm getting a #VALUE! error and for the life of me am not able to pinpoint the problem area.
Public Function CBOList(Rng As Range, App As String, OutRng As Range) As Variant
Dim Func As WorksheetFunction, UniqueVals As New Collection Dim cnt, who Dim ctr As Long, lst As String Dim myarr() As Variant
I am using the following array formula to give the average number of days aging on overdue reports for my staff where Manager and Aging_on_Overdue are named ranges in my input data: {=AVERAGE(IF((Manager="Joe Smith")*(Aging_on_Overdue>0), Aging_on_Overdue))}
This works fine as long as Joe Smith has Overdue reports, but returns a # DIV/0 if he has none. How do I get a formula to return 0 if he has no overdue reports? I need this because I have to do a weighted average of the group and my SUMPRODUCT formula returns a #DIV/0 for the group if any member of the group has no overdues.
I want a UDF; = OK (f1,f2) each argument being an alternative function. If f1 returns an error message then use f2. Should be easy but I cannot get it to work.
Public No_of_Sims As Variant Public Sim_No As Variant Public Ground_Up_Agg As Variant Public UseSelfInsuredVehicle As String Public Option_Name(1 To 12) As String
[Code] .....
The code highlighted in BOLD is where I am getting runtime error 9 (Subscript out of range).
I cannot acheive to have a {Sum(if(...)} formula applied to whole columns. See below.
The following formula return a numeric value. So it works. {=SUM(IF(Query!$L1:$L65535=TEXT($A37,"@"),Query!$AM1:$AM65535,))} (confirmed with Ctrl+Shift+Enter)
The following formula returns #NUM. So it fails. {=SUM(IF(Query!L:L=TEXT($A37,"@"),Query!AM:AM,))} (confirmed with Ctrl+Shift+Enter)
I am trying to fill an array with only a few values within a loop (when XspacingA is 0.5, add the value of the Line to the array) and keep getting the error "Subscript out of range".
I need understanding what is the maximum length of string data type. I read that is 63K characters... but, in my case... maximum value is 253. I don't know why happens this. here is some code from one of my buttons.
Private Sub btn_procesare_Click() Dim intUnit As Integer Dim strBuffer As String Dim contor, var_else, cale, dest, dest_final, masca, filtru, **** As String Dim vntbuf As Variant Dim sql As Variant For i = 0 To Me.ListBox2.ListCount - 1 Application.Worksheets(1). Range("A" & i + 2).Value = Me.ListBox2.List(i, 0) Next...........................
when watch for x, the value is maximum 253 characters. I get error Data Type Mismatch - Error 13 with this.
I have a very simple workbook in Excel 2000 with one page containing all my data which I update on a daily basis. Some of the data is linked to another workbook so that it updates each time I open it. Then I have 12 tabs, one worksheet for each month of the year with 10 simple graphs on each worksheet.
As you can see, it is a very simple worksheet. Each month, I copy and paste the graphs from the previous month into the current month and simply alter the Source Data in the graph to gather the current month's data. At the start of this month, it allowed me to copy and paste, but when I tried to alter the Source Data to the current month, I got a window on screen with a yellow triangle containing an exclamation mark and the words "No new fonts may be applied to this worksheet". If I click the OK button or the cross, it responds but the whole programme is locked. The only way I can get out is to give the 3 fingered salute and close Excel down.
I have a workbook with 33 worksheets and more than 150 charts. Now, when I right-click on a chart to access "Source Data" for example, I get a message saying "No more new fonts may be applied in this workbook". Then I have to click "OK" about a dozen times before I get access to the dialog box. Curiously, it happens for some charts and not for some others.
When I try to populate a worksheet with the data from a multicolumn listbox on a userform.
I have references which list index is to go to which cell on the worksheet, however if there is no entry in this list index it is giving me this error.
As the listbox could have 1 line or up to 10 lines populated, I think I need to put an error handling on so that if the entry in listbox index is "" then resume next, or something like that. However everything I have tried doesn't work and I keep getting this error.
Here is the code I have to populate the worksheet from the listbox. There are 7 columns and 10 rows.
How to handle this error?
[CODE] Private Sub cbPrint_click() Call Error_Handling_VBA_On_Error_Resume_Next Dim ws As Worksheet Set ws = Worksheets("Invoice Copy") With ws .Range("B11") = CusName.Value
The array sum function works but Concatenate not. In Excel I get the formula Concatenate(H2:H3) in stead of Concatenate(H2,H3). What should I change to get the code working?
I want to create a function in a module that will read an array from sheet1 preform an operation on it then return the result to the spreadsheet in a defined amount of cells in this example 8.
In Module1:
VB: Function func1(ByRef arrayA()) Dim arrayB(8) For k = 0 To 7
[Code].....
How does the resultant arrayB get populated onto the spreadsheet?
I want to use the countif function for a certain array. The range is set by another cell which is made up out of a percentile of an entire row.
The problem is is that excel doesn't see the value it displays so i continuously get a value of 0 in the countif cell. If i fill in the range by hand, which is exactly the same range as the outcome of the percentile the countif cell does give the correct value.
So in short the problem is i guess that the countif cell does not recognize the value because this value is made up by a formula.
I am working on a Monthly Vehicle Spread Sheet. One of the outputs I am trying to achieve is an automatic calculation of Mile Per Gallon. To do this, I need to know if there is a function that will return the value of the first entry of a group of cells.
In calculating the miles per gallon, I need to subtract the first gallon amount entry of the total gallons in the month, then divide that number into the difference of the mileage in the month recorded when the vehicles fueled up.
I am trying to write a code for simulating a stock price using geometric brownian motion. I have the function part down as follows:
Public Function SimStock(Initial_Stock_Price As Double, _ Expected_Return As Double, _ Volitility As Double, _ End_Time_Days As Double, _ Number_of_Steps) As Double SimStock = Initial_Stock_Price * Exp((Expected_Return - Volitility ^ 2 / 2) * (Number_of_Steps / End_Time_Days) * NRnd2() * Sqr((Number_of_Steps / End_Time_Days))) End Function
Now what i need to do is to apply this to an array. so that when i run the sub it will simulate prices from today up to some number of days that i specify. This number of days will be equal to "End_Time_Days" which is part of my function. Furthermore the simulation has to be such that it uses the above formula for the first entry but then replaces "Initial_Stock_Price" with the result of the preceding entry in each subsequent entry.
For some reason my array called "PriceSum" is not getting load with values or not being summed. I am not sure if it is because I am trying to load a value with a decimal in it or not.
Code: Private Sub Purchase_Click()Dim MyArray As Variant Dim x As Integer Dim t As Integer Dim lastrow As Integer Dim QuantityArray(0 To 1000) As Variant,
I have a big macro that runs whenever there is a change made. I'm not gonna link it all because I don't think that would be useful... This macro does:
1. Disables Events. 2. Removes Protection 3.Calls some macros that check a few values and change a few cells. 4. Activates events. 5. Hides or shows ranges of cells depending on the results of the called macros. 6. Reactivates protection.
As well as the cells the called macro changes, there is a column of True/False results stretching from AE16 to AE491 with several blanks in the list as well. (All of this is decided upon a different macro that isn't linked with the change.) I want a loop that will read the True/False column and if it finds a false, make 8 buttons invisible.
I tried putting this code between Step 5 and 6 of the macro.
Code: Dim J As Integer J = 16 Do
[Code].....
This isn't working at all... I was thinking if there was gonna be an issue then it would be the opposite where it stops the buttons appearing all together but even when there are falses and I am changing things it doesn't seem to make a difference.
