I have a excel sheet where I have a list of strings seperated by a "-". I am looking to take the particular cell value and swap the characters before the dash with the characters after the dash. So for example:
FG03-FJ04 would become FJ04-FG03
AB02-CD12 would become CD12-AB02 and so forth....
I have tried findling around with the split function but cant seem to get anywhere, does anyone know a tried and tested method of doing this?
I have a column filled with names per row. I wanted to standardize it by using the following format.
The comma after the last name is always an indicator to me that it is the last name.
<First Name> <Middle Initial(if any)> <Last Name>
My actual records contains the following:
BIMBO EPPING - OK
AHMAD SADICK - OK
Salana, Laura R - need to be arranged to > Laura R Salana
Cantos, Rhoda Grace J - need to be arranged to > Rhoda Grace J Cantos
I have a filename in the format XXX-YYY-ZZZ.xls, where all the XXX and YYY and ZZZ are of variable length. Sometimes it is of the format UUU-XXX-YYY-ZZZZ.xls
I wish to delete all the characters to the left of the rightmost "-" character, including that "-" character.
I am working on a report but I need to split of text cells that contain text and numbers. I had worked in some formulas and I got stuck again when I drag down the formulas. In the attached file, you will see two tables. The one in the left is my current job. In the table of the right is how the table must look like.
The table is complete and will give you the whole idea.
Basically, I need to split the cell into three categories that are "Family", "Model" and "Phase". In example:
Cell Family Model Phase
CCA CCA
DC50X DC50X
DCX3300CRDDCX3300CRD
DPC2434 DPC2434
DCT-1700DCT1700
DCT-1800DCT1800
DCT-1800P3DCT1800P3
DCT-1800P4DCT1800P4
Attached File : Family Model.xlsx
splitting out date/time strings to separate cells, but I cannot find how to split the following.
I have the serviceable date of an aircraft delivery set as 'S hh:mm dd-mmm-yy', which is due to being used by an external application in this format. This is entered by the user and I need to be able to extract the date time strings and switch them to dd-mmm-yy hh:mm, excluding the S from the result as a formula in another cell.
I keep getting a #value error or returning the whole string result.
Excel vlookup function returns #VALUE when the lookup value exceeds 256
characters. I need a hash function to transform large strings into a value
that does not exceed the 256 character limit.
i've tried searching for "Mode Function in Text" , "Mode Function by Text" but to no avail. Can someone please guide me in how to do a Mode by Text? =MODE(number1,number2,...) But if i have a whole chunk of data in Strings in cells Range A1:C50
1) How can i get the mode of that Range ?
2) is it possible to get the statistic of those for e.g.
Apple 20
Pear 30
Watermelon 50
etc......
One of the lines in my VBA code reads as follows
View 4 Replies View RelatedI have been using the CONCATENATE function to merge 2 strings together into a single cell. However the problem is, the third concatenated cell depends on the other 2 existing. The idea is I want to take 2 columns of data, and use a formula to merge them, then delete the original 2 data columns so I have a single column with the full data merged.
COL 1 (A3) = First Name
COL 2 (B3) = Last Name
COL 3 (C3) = Full Name (wanted)
So I do =CONCATENATE(A3,B3) and that puts the fullname in C3, but I want to sort of "flatten" C3 so that I have the fullname by itself and I can delete the original cells (A, and B)
I am attempting to multiply the value of strings/integers for an output in a function macro. I know it's a simple question, but a simple answer would be suffice. I'm in the middle of a massive brain fart...
View 6 Replies View RelatedI have some quiries on split function. I have a string that I splited using split function
Assume cell A1 has the following string and we declare one variable and assign the string to it.
name="Ramesh-Katta-Mr-Naidu"
Split(name, "-")
It splits based on parameter we supplied that is "-".
name(0)=Rameh
name(1)=Katta
name(2)=Mr
name(3)=Naidu
What will be the value if the cell is empty?
How it will split if the cell value is only "Ramesh"
I have been trying to use the concatenate function to join some text strings to a cell on a different sheet - From an input sheet -Sheet 1 named Input, to a Notification Form (Sheet 2). Although the Function Argument display tells me that it will display the result I want it actually displays just the formula. It's a very simple thing
Address 1 10 Downing Street
Address 2 Westminster
Address 3 London
Postcode SW1A 1AA
I want displayed as: 10 Downing Street, Westminster, London, SW1A 1AA in a single merged cell. All I am getting on the Form is =concatenate(Input!c25," ",Input!c26," "Input!c27," "Input!c28). I feel sure that it is a very easy solution but I can't arrive at it!!
I have a macro that loops through a column of cells to retrieve a price that is buried in a string. The cells in this column are formatted one of two ways. Either they are completely empty, or the following pattern of string is entered: "$181.27 ea. for 12 on 5/21/14" (the quotes are not part of the string entered). What I need my macro to do is pull out "$181.27" and then drop the dollar sign and then do some more math before inputting a result in a different cell, but the prices range from less than a dollar to over $100,000 so I need to use split instead of left. Should be simple, yes? Here is what I have:
[Code] ......
But I get an error 9: subscript out of range on the line that calculates PriceSplit whenever it encounters a blank cell.
I've recently been making a macro in visual basic that loops through all my excel files and replaces an old company name to a new company name and It's working great, well except for one thing... It always misses one string in the file and it leaves me with 90% of the file corrected. I think that the string might be a part of a merged range so Range.Find is not able to find it. I was suggested to use this code:
[Code] ......
Because that's the code that is generated when using the replace function in MS Excel 2010, but I keep getting syntax errors?
I am trying to parse a formatted text file. I am using the SPLIT function as
arr() = split(cline," ")
where cline is an input line. if the line input(cline) has multiple spaces between two words, how would it split that.
Eg :
abcd defg fefdcs fasdfasdsa
would the output of above be
arr(0) = abcd
arr(1) = defg
arr(2) = fefdcs
arr(3) = fasdfasdsa
I need to do a vlookup that takes a string from one cell and then tries to find that string (embedded in a larger string) in the table array
Essentially I imagine this involves the FIND function at some point.
Attached is an incredibly simplified example of what I'm looking for.
I have an excel worksheet with about 10K rows of data in column A.
I have also another list of data, about 200 rows of data, in column G.
I need to color each cell in column A that contains, anywere in the string, any of the data strings in column G.
Example:
in column A
row 1: info@duende.com
row 2: rasko@silvester.com
row 3: supportonline@fabius.com
row 4: myhelp@friday.com
in column G:
row 1: help
row 2: info
row 3: support
I need rows 1, 3 and 4 in column A to be colored.
I am working with excel sheets for dimension population of metrics.
I want to make some process less manual. In one column I am given some values like ((1110 + 1230 + 3120 + SERVSELCT) - (1110.21 + 2110.30))
Based on these values I have to write the expanded form like:
The values that do not include the decimals are known as parents, for which I have to write PCYDYNNOTRANS_1110 and for the values that include a decimal I have to write CCYDYNNOTRANS_1110.21
I have to write this in the adjacent column for all the values I had mentioned above.
I was wondering if there is a way that I can make this less tedious, and I can have a list that would pop up in the adjacent column where I could select which one I should use i.e. either PCYDYNNOTRANS_ or CCYDYNNOTRANS_ and I would have to just copy paste the values.
I'm looking for a formula or code that would take a client's name that appears in one cell, with the last name first then a comma and then the first name, and paste it into another cell with the first name first and then the last name with no comma.
Example: cell A2 contains "Smith, Joseph", cell B2 should have "Joseph Smith". If I need to provide additional information,
I have a spreadsheet list in the following format (Note Tax ID would be cell
A1, etc):
A B C
Tax ID Numbers Street
11-03-3040-0178-01-794HIGMAN PARK
11-03-2310-0001-00-3100HELMAR
11-03-3040-0169-00-0102HIGMAN PARK
11-03-3040-0165-00-4104HIGMAN PARK
11-03-0020-0039-01-6104S CRYSTAL
11-03-0021-0006-01-9105S EUCLID
11-03-0024-0004-08-8105PAUL
11-03-0018-0029-00-1105HIGMAN PARK
11-03-1880-0069-00-4107S CRYSTAL
This continues downward to cells 6577. I'm looking for a way to carry these three columns over at some point so I can put more data on a single page, thus minimizing the # of pages I will need to print, but yet remain in the proper sequence as established in column B.
=IF(AND(B3:ZZ3="Jan",B10:ZZ10>=500000,B13:ZZ13="POST"),"1","0")
And I'm pulling from a spreadsheet that looks like this:
Jan[B3], Jan[C3], Jan[D3]
500,001[B4], 632,000[C4], 992,000[D4]
PRE[B5], POST[C5], POST[D5]
(and the function is calculating how many januarys, greater than 500,000 that are also post).. how do i get it to ADD the amount of fields that meet that crieteria instead of giving me a 1? I want it to say "2" (adding together all that meet those needs)
I have two inputboxes. I want to set the default value of the second inputbox as (effectively) one cell down from the first inputbox entry. In other words, if I type G17 into the first inputbox, I want the second inputbox to then have a default value of G18.
View 5 Replies View RelatedI am unsuccessfully trying to manipulate and copy a formula.
Column A would typically be used as a benchmark for one retailer and have the base price with the other columns simply showing differences in margin etc if the price was changed. This would typically mean the BWP and fixed terms etc would be constant.
However in this circumstance I need to ascertain for different retailers a,b,c,d, etc the shelf price and compare their NTS and % Margin. Whilst I can enter the different prices and change the terms as required, the whole sheet seems to link back to column A rather than simply drawing from the info in each respective column.
a
b
c
Price On Shelf
20.12
20.05
18.87
Shelf Price Excl. GST
17.50
17.43
16.41
[code]....
I have a userform that accepts some information and checks to see if the values have already been used (address and work order number) If the value is used the user must change the value ,an input box is triggered to get the new value. My question is how do I transfer the value back to the userform??
View 9 Replies View RelatedI have 3 pivot tables I'm using a macro to get a value out of, by changing the 2 "Page" fields. However, after the macro's done running, the page fields are messed up. (The order changes, one of the options becomes "").
View 9 Replies View RelatedIs it possible to modify a link so that you can change the link easily by the value of a certain cell.
='[Labour Plan Week 24.xls]Hours'!$E$135 and I want something like ='[Labour Plan Week " &H5& " .xls]Hours'!$E$135. Where H5 contains the week number
Theres a progam created using Firebird as described here: {url}
I want to be able to enter data into the firebird application from an Office application (e.g. Excel) using VBA.
I want to also be able to extract data from the application using VBA.
I am working on a macro that opens up a workbook, formats the data by moving columns etc and then spits out the data to different workbooks according to a string in col R (M,C,S etc). I am able to split the file into the workbooks, but it copies the whole sheet and not just the visible cells (its working via a filter). I have tried adding code into the loop to basically copy the visible cells to Sheet2 and then delete (or clear) sheet1 so that I only have the relevant data but have very interesting. This is only the first of a few procedures I would like to add within the loop. Ideally I want to have a prompt for the filename and path for each file, and also another procedure to add a number into each seperate file. If I know why I cant get this simple function to run I will, hopefully, be able to add in the other bits!
Function SplitSheets()
On Error Resume Next
Dim ws As Worksheet, source As Range, dest As Range
Dim daily As Worksheet
Dim sType(4) As String
Dim i As Integer
Dim strSaveFileas As String
sType(1) = "M"
sType(2) = "S"
sType(3) = "C"
sType(4) = "N"
Set daily = Worksheets(1)
For i = 1 To 4...................
I'm putting together a workbook to keep track of income generated from Contractors (I work in recruitment). I have an existing system that displays margin, hours worked and income (margin * hours) but what I am looking for is a neater solution that would still have the margin column, but when hours are entered into a cell it is factored by the margin and displays income in the same cell.
So to be sure I am describing correctly, I am after a formula that will enable me to
1. Enter a value into a cell (for the hours worked - lets call this B1)
2. Multiplies this value by another cell (a fixed amount, the margin - lets call this A1)
3. Displays this result (B1 * A1) in cell B1, the same cell as the hours were entered in.
I am trying to wrap up a project. The project consists of taking the input values from a userform and entering them into various Word documents and Excel workbooks. The procedure is run from Word. I have no issue completing this part.
However, there are a few Word documents that have an Excel worksheet embedded into them. How can I manipulate these worksheets using VBA? I have attached an example for your reference.
I have found out how to get into edit mode, but I still do not know how to actually edit the worksheet.