I need an error message to pop up if 3 cells contain the same data
The range of these cells would be G19 to G49
Ideally the error message would say "Rules Broken"
Also if possible could the same message be shown if the value of cell J52 exceeds 50,000000
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View RelatedI've been trying but excel does not seem to recognise x and y
so here it is
2* X = Z
Where 2 is changable
X = Z-2
Now i just want to find what Z is.
Here's an Example
1.3x - z
1.3(x-.06) = z
1.3z - .078 = z
1.3z = z + .78
1.3z-z = .78
.3z = .78
z = .78/.3
z = 2.6
I have a timesheet which calculates overtime and the sheet works ok. I've had help on this board constructing it and i'm well pleased so far. what i need for it now, is if there is an input cell with no data in it, i want the results cell to stay blank but at the moment i'm getting those horrid hash symbols.
The formula just now is end time minus start time, and from that a 45 minute break is deducted. The break is always the same so i have that in a cell on it's own and the formula does an end minus start, then - the break. What i'd like is when there's no data in the cells, leave the result cell blank...
I am copying sheet 1 to the back of the workbook and renaming it. I am using a few command buttons on sheet 1 to trigger the copy macro, etc. I do not want these buttons on the copied sheets.
I have done a right click /Format Control/Properties and selected “Don’t move or size with cells” but the buttons are still being copied and still active for the macro. Perhaps due to sheet copy versus cell copy?
I guess I could add select and delete steps to the macro for the buttons but this seems excessive.
1. When text is entered into a specific cell in the Master Sheet a new Tab is created named after this text and a second string of text i.e the date.
2.At the same time as this TAB is created I would like only the rows with checkboxes ticked in the Master Sheet to be copied to the new TAB(Not the Checkboxes themselves) [possibly using TRUE/FALSE in "B" row].
3.I would like the formulas, formats of these checked rows to be copied too.
4. Additionally the first 12 rows(all headers) and the last row(subtotal row)should be copied too.
The idea of the Workbook is to have an overall options sheet that is customised on a per customer basis with a record saved on a new tab in the same workbook.
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
I do hit the SCE (Shift-CTRL-Enter) keys. The formula does work in one workbook, but not the other. The only difference between the two workbooks is this formula has a larger range.
New Formula- doesn't work (ERROR- #DIV/0!)
{=AVERAGE(IF(Sheet1!A3:A1094="MONDAY",Sheet1!E3:E1094))}
Old Formula- works
{=AVERAGE(IF(B6:B451="MONDAY",E6:E451))}
When I input the formula : =(G9+G16+G23+G30+G37+G44+G51+G58+G65+G72+G79+G86+G93+G100+G107+G114+G121)/17
I get the error message #VALUE!
I have one line of code that I need an error message for:
View 2 Replies View RelatedI get spreadsheets sent to me with hours and minutes in decimal format. Frequently a quarter of an hour or three quarters of an hour are posted as 0.15 or 0.45 instead of 0.25 and 0.75. Other odd fractions can also appear.
I want an error message if the value when divisible by 0.25 is not a whole number.
I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
I would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
I am getting the error message
"Compile Error: End If without block If" for the code below :
ErrorHandlerRoutine:
If MyInteger = 1 Then
MsgBox "Data does not exist in the CO2 data set"
End If
Resume 1
If MyInteger = 2 Then
MsgBox "Data does not exist in the Water data set"
End If
Resume 2
If MyInteger = 3 Then GoTo 3
MsgBox "Data does not exist in the Waste data set"
End If
Resume 3
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
I am writing some code to do a comparison between two cells X2 or AB2 with an X which checks to:
1. make sure one of the two are filled, or
2. both are not filled.
Below is an extract of the spreadsheet I am working on. I need to check to make sure one of the boxes is checked. If both are empty or both filled with an ("X"), I want a message box to tell me to correct the error and stop the macro from continuing. If only one is marked with an ("X"), I want the macro to continue but don't know how.
RSTUVWXYZAAAB
2IN PROGRESS: COMPLETED:
Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed.
Here is the code for those who may need it....
I've got the below code which I use to log users who opens my spreadsheet. It's a Event so runs when the spreadsheet is open with macro enabled. The spreadsheet is on a shared drive which has the prefix "K". Most users it works find but one user gets a error Message "Path or Drive" error. I got around it by adding "on error" but how do you overcome issues with drive prefixs and the drive address e.g "K" vs "\CRD2000"
Private Sub Workbook_Open()
Open ThisWorkbook.Path & "usage.log" For Append As #1
Print #1, Application.UserName, Now
Close #1
End Sub
I have developed a program in which the user will only see the userforms (and to an certain extent not even be aware of excel doing most of the work).
i am looking for code that will intercept an error message should something go wrong in my vb code. Currently when an error occurs, it pops back to VB and gives the error message. I want it to rather give a popoup message asking the user to contact me.
i'm coping a file over itself and i get an information message "File cannot be copied onto itself" - An attempt to copy a file could not be completed because the file already exists or same source and destination.
i would like to surpress this, i have tried the following, but to no avail:
Application.DisplayAlerts = False
Application. ScreenUpdating = False
Application.Interactive = False
?
I have created a report with 22 sheets as different pages to be included or hidden depending upon the type of report needed. I had found several sources saying to use the Custom Views function. So for example I will unhide all the sheets and add as a Custom View "All Sheets" and then whittle it down to the 5 I might need for B type inspections and add that view as B Inspection. But when I try and toggle between them I'm getting an error message that says "Some view settings could not be applied" - and thew saved view I was looking for is not the same sheetwise.
View 1 Replies View RelatedThis formula might be the problem for the error message.
SUMPRODUCT((MOD(COLUMN(C3:CO3)-COLUMN(OFFSET(C3:CO3,,,1,1)),3)=0)*C3:CO3)
I have other cells with the same formula (but with different range i.e. D3:CP3), yet it doesn't have circular reference error message.
I'm trying to create a situation where the user would get an error message when they tried to enter numbers in two specific columns in the same row. That is, in row C they can only enter a number ( 1 or 2) into C5, C6 or C7. If they enter a number into two of these cells, I want an error to appear. They would have to stop and correct the error.
I've tried two scenarios with no luck:
1. I've data validation where I did SUM(C5:C7) and hid the answer in C8. I then tried to get a data validation to display an error code when C8 exceed 2. This didn't work.
I may be misunderstanding the point of error.type() command. I'm wanting an error message to appear once a cell goes below 0. So far, I've only managed to have the error message appear all the time, or never.
View 4 Replies View RelatedI need to write a formula but excel shows an error message "Formula Too Long." There are two long strings of the formula that I repeat several times. Is there any way to put these strings in other cells and reference them within the formula? Each of the strings looks very similar to this:
View 9 Replies View RelatedI'm running this line (from longer code of course), where i/g are integers and h is a range:
[Code] ......
And I'm getting run time error '1004'.
How do you generate an error message that states "You are not authorized to delete this worksheet" any time a user attempts to delete the specified worksheet? This message also has to block the user for deleting the worksheet.
View 6 Replies View RelatedI need a program for my user form such that it displays an error message.
I have created an user form with employee name ,task and remarks.
I need a program in such a way if an user clicks the "submit" button without entering all the fields in the user form, an "error message" should be displayed.
The submit button has to work only if all the fields are filled by the user.
I have a worksheet called "PurchaseOrders" and a worksheet called "Orders."
In the "Orders" Worksheet I have a command button. When this button is clicked it writes to cells in the "PurchaseOrders" Worksheet. The cell range it writes to is N21:N1000. It basically writes an invoice number which exists in cell B6 of the "Orders" Worksheet with each number listed in order.
After it has written, when I return to the "Orders" Worksheet, if the button is clicked again but the PurchaseOrders" Worksheet N21:1000 contains an invoice, the same as "Orders" Worksheet B6 (a duplicate), I would like an error message to be returned stating "Please Create a new invoice." I already have a sub where error messages are recorded for void fields and unregistered customers.
How would I write an if statement in this sub to say:
IF Cell range in "PurchaseOrders" Worksheet (N21:N1000) does not equal the code in "Orders Worksheet (B6) please process code as normal. Else if it does please display an error message and do not proceed with processing any code? For some reason I'm having trouble naming the cell range.