Error Message When Using (VBA) Vlookup Function
Mar 2, 2014I'm running this line (from longer code of course), where i/g are integers and h is a range:
[Code] ......
And I'm getting run time error '1004'.
ADVERTISEMENT
Vlookup Error Message
Dec 15, 2006I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
Vlookup With No Error Message For Null Value
Jan 27, 2009I need a formula that will use the account number in Column A (My consolidated Spreadsheet) to search for the same account number in column A (My Individual Unit Spreadsheet) and return a value in the corresponding column. I know I can use VLOOKUP to do this but if the account number value does not exist in the Individual Unit Spreadsheet I do NOT want the #N/A value to show up in the cell, as it will then not calculate totals. Solutions please?
CONSOLIDATED
GPCLCCGCLPSILVRConsolidated
Assets :
Current assets
100100
Daily Depository - Union Bank
425 425
100300
Plant (A/P) Checking Account
(680) -680
100350................................
Vlookup N A Pivot Table And Keep Getting An Error Message
Feb 15, 2008I am trying to to a vlookup on a pivot table and keep getting an error message (The error states that The formula you have entered contains a error) and excel will highlight the 0 in my formula. The formula is
=IF(ISERR(VLOOKUP(G17,'Curr Month'!$G:$H,2,FALSE)=TRUE,0,VLOOKUP(G17,'Curr Month'!$G:$H,2,FALSE)
COUNTIFS And INDIRECT Function - Formula Not Working And Keep Getting Error Message?
Apr 25, 2014Because countif cannot be used across multiple tabs, I'm using the following workaround where "MySheets" is the range of tabs and E8 is the cell I want "counted".
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented"))
This works perfectly, except that I really need COUNTIFS... I want Excel to count either "Fully implemented" or "Partially implemented" when in E8. I cannot get the formula to work and keep getting an error message.
=SUMPRODUCT(COUNTIFS(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented",(INDIRECT("'"&MySheets&"'!E8"),"Partially implemented")))
Error In Vlookup Function With Single Value
Jul 28, 2014Please find the attachment in which i have mentioned all the details about the error in VLOOKUP function. I couldn't understand why I am getting that error for that single Vlookup value while others are ok.
Vlookup error.xlsm
If/vlookup Function Returning N/a Error
Apr 27, 2007My problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
View 6 Replies View RelatedNested IF(AND Formula Error Message) "You've Entered Too Many Arguments For This Function"
Jan 27, 2010I am entering the following Nested IF(AND statement into a cell and getting a message stating "You've entered too many arguments for this function." Any idea on what formula I can use to get the needed information into this cell based on the fact that there are different inputs that can be entered into the related cell that will trigger the needed respons in the working cell?
=IF(AND(K1051="Down",L1051<2),"Yes","",IF(AND(K1051="Partially Down",L1051<2),"Yes",""))
Split Function And "expecting Array" Error Message
Nov 2, 2009I'm getting an error that I'm not quite clear about. I'm essentially using a fuction that Mr. Leith Ross provided here: http://www.excelforum.com/excel-prog...xt-source.html to grab text from a web page. I want to create 100 rows of data based on the array housing that data using the SPLIT function.
View 2 Replies View RelatedError Message (Compile Error, Procedure Too Large)
May 20, 2009I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View RelatedVLookup To Pivot Table Using Match Function - Returns Error If Can't Find Match Value
Mar 11, 2014I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
Error Message "run Time Error '424' Object Required"
Aug 17, 2008For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
Error Message #DIV/0!
Nov 2, 2007I do hit the SCE (Shift-CTRL-Enter) keys. The formula does work in one workbook, but not the other. The only difference between the two workbooks is this formula has a larger range.
New Formula- doesn't work (ERROR- #DIV/0!)
{=AVERAGE(IF(Sheet1!A3:A1094="MONDAY",Sheet1!E3:E1094))}
Old Formula- works
{=AVERAGE(IF(B6:B451="MONDAY",E6:E451))}
Error Message #VALUE!
Jul 16, 2008When I input the formula : =(G9+G16+G23+G30+G37+G44+G51+G58+G65+G72+G79+G86+G93+G100+G107+G114+G121)/17
I get the error message #VALUE!
Error Message For Macro
Jan 11, 2009I have one line of code that I need an error message for:
View 2 Replies View RelatedError Message If Value Not Whole Number
Feb 3, 2014I get spreadsheets sent to me with hours and minutes in decimal format. Frequently a quarter of an hour or three quarters of an hour are posted as 0.15 or 0.45 instead of 0.25 and 0.75. Other odd fractions can also appear.
I want an error message if the value when divisible by 0.25 is not a whole number.
On Error - Vba Code As A Message
Dec 28, 2006I would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
End If Without Block If Error Message
Jul 17, 2007I am getting the error message
"Compile Error: End If without block If" for the code below :
ErrorHandlerRoutine:
If MyInteger = 1 Then
MsgBox "Data does not exist in the CO2 data set"
End If
Resume 1
If MyInteger = 2 Then
MsgBox "Data does not exist in the Water data set"
End If
Resume 2
If MyInteger = 3 Then GoTo 3
MsgBox "Data does not exist in the Waste data set"
End If
Resume 3
Error Message - A Wanted One
Jul 29, 2008I need an error message to pop up if 3 cells contain the same data
The range of these cells would be G19 to G49
Ideally the error message would say "Rules Broken"
Also if possible could the same message be shown if the value of cell J52 exceeds 50,000000
Error Message Pop Up Alert
Jun 11, 2009I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
Box Comparison With Error Message
Aug 24, 2009I am writing some code to do a comparison between two cells X2 or AB2 with an X which checks to:
1. make sure one of the two are filled, or
2. both are not filled.
Below is an extract of the spreadsheet I am working on. I need to check to make sure one of the boxes is checked. If both are empty or both filled with an ("X"), I want a message box to tell me to correct the error and stop the macro from continuing. If only one is marked with an ("X"), I want the macro to continue but don't know how.
RSTUVWXYZAAAB
2IN PROGRESS: COMPLETED:
Sumproduct #Value! Error Message
Dec 28, 2009Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
Message Box Instead Of Run Time Error
Jun 7, 2006I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed.
Here is the code for those who may need it....
User Log Error Message
Jun 10, 2006I've got the below code which I use to log users who opens my spreadsheet. It's a Event so runs when the spreadsheet is open with macro enabled. The spreadsheet is on a shared drive which has the prefix "K". Most users it works find but one user gets a error Message "Path or Drive" error. I got around it by adding "on error" but how do you overcome issues with drive prefixs and the drive address e.g "K" vs "\CRD2000"
Private Sub Workbook_Open()
Open ThisWorkbook.Path & "usage.log" For Append As #1
Print #1, Application.UserName, Now
Close #1
End Sub
Intercepting The Error Message
Jun 21, 2006I have developed a program in which the user will only see the userforms (and to an certain extent not even be aware of excel doing most of the work).
i am looking for code that will intercept an error message should something go wrong in my vb code. Currently when an error occurs, it pops back to VB and gives the error message. I want it to rather give a popoup message asking the user to contact me.
Suppressing Error Message
Mar 21, 2007i'm coping a file over itself and i get an information message "File cannot be copied onto itself" - An attempt to copy a file could not be completed because the file already exists or same source and destination.
i would like to surpress this, i have tried the following, but to no avail:
Application.DisplayAlerts = False
Application. ScreenUpdating = False
Application.Interactive = False
?
When Using Custom Views - Get Error Message
Aug 13, 2014I have created a report with 22 sheets as different pages to be included or hidden depending upon the type of report needed. I had found several sources saying to use the Custom Views function. So for example I will unhide all the sheets and add as a Custom View "All Sheets" and then whittle it down to the 5 I might need for B type inspections and add that view as B Inspection. But when I try and toggle between them I'm getting an error message that says "Some view settings could not be applied" - and thew saved view I was looking for is not the same sheetwise.
View 1 Replies View RelatedCircular Reference Error Message
Mar 2, 2014This formula might be the problem for the error message.
SUMPRODUCT((MOD(COLUMN(C3:CO3)-COLUMN(OFFSET(C3:CO3,,,1,1)),3)=0)*C3:CO3)
I have other cells with the same formula (but with different range i.e. D3:CP3), yet it doesn't have circular reference error message.
Create Error Message When Two Columns In The Same Row Are Used?
Mar 26, 2014I'm trying to create a situation where the user would get an error message when they tried to enter numbers in two specific columns in the same row. That is, in row C they can only enter a number ( 1 or 2) into C5, C6 or C7. If they enter a number into two of these cells, I want an error to appear. They would have to stop and correct the error.
I've tried two scenarios with no luck:
1. I've data validation where I did SUM(C5:C7) and hid the answer in C8. I then tried to get a data validation to display an error code when C8 exceed 2. This didn't work.
Displaying An Error Message Under Certain Conditions
Mar 2, 2009I may be misunderstanding the point of error.type() command. I'm wanting an error message to appear once a cell goes below 0. So far, I've only managed to have the error message appear all the time, or never.
View 4 Replies View Related
