I have a query where the correct name is mixed up by each single click of a button and finally the mixed characters reverts back to correct name. I will give the examples below.
1) Beautiful --> next click of a button
2) utifulBea --> next click of a button
3) Beautiful --> the final output will be back to same name.
What I mean by my "bold" underlines:
QRG5UUl.png
Notice the difference between the bold underline and the normal ones. There is also some weird thing happening where in some cells, when I use the underline feature, it shows as a bold underline, but once I've pressed enter to move on to another cell, the underline reverts back to normal. If I select to edit (F2 or double-clicking) said cell, the underline becomes bold, and vice versa (s3lw.png).
All this started happening immediately after I did this (was just experimenting, and I have no idea what this actually does, or if it was the cause of those occurences): Insert > Symbol > Special Characters > No-width optional break. I did that to just one cell though, and now all this weird stuff is happening.
The code brings up the message box the way I need it to
At the bottom of the code in the standard module is what I changed.
In the message box. If the GDT button is clicked the GDT chart opens. If the Symbol button is clicked the Symbol chart opens. This all works.
But will I select a symbol from the symbols chart it will appear in the cell that is double clicked. but then end up as a letter instead of a symbol.
But, the gdt chart works perfect.
I thought Cancel = True Would do the trick but does not. Any ideas what is missing??
This code below is in the sheet module
Private Sub Worksheet_BeforeDoubleClicK(ByVal Target As range, Cancel As Boolean)
ThisWorkbook.Unprotect
ActiveSheet.Unprotect
With Application
Cancel = True............
I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?
View 3 Replies View RelatedCan a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I have a question. Can this be done. Pass a couple of varibles back from a called sub routine?
The calling sub calls the called sub does which has code plus a couple of varibles needing to come back.
Scope: The called sub is a series of case statements with code and sets varibles which are needed back in the calling sub.
I have a macro running in a workbook that gathers some data (a date, a string and a few arrays). Towards the end of this macro, I need it to open another workbook and run a macro that sits in this other workbook, using the data from the first workbook. I then need it to return some results (several integers) back to the first macro to be pasted into the first workbook.
I gather that I can't use 'Call' as the second macro is in another workbook.
I've found that I can use Application.Run but I'm unsure how to carry variables back and forth using this.
How to move the variables between macros / workbooks using the Application.Run option, or maybe another way of doing things?
If my week commences on Saturday 16th Feb (A2), but I do some training on 22nd February (B2), how do I C2 to show the first day of theweek it commenced.
EG
W/C
Training
Show in Cell
16th Feb
22nd Feb
16th Feb
23rd Feb
25th Feb
23rd Feb
I have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
If a user changes some data in a pivot table and then refreshes the table, the changed values are supposed to revert to the source data, right? This does not happen in my pivot table.
Any changes made in the underlying data get transferred to the pivot table refresh, as expected. But if I change some values in the pivot table, followed by a refresh, then the cells that I changed remain the same unless I happened to modify the corresponding values in the underlying source data too. In other words, the refresh operation does not touch the pivot table except specifically where an update is driven by a change in the underlying data.
This behavior is different from what i remember from, say, excel 97 / 2000.
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
I'm using Excel 2000 and I have a spreadsheet with 4 columns (A-D) and many (500+) rows.
Part 1:
#########################################
Colums A & B both contain identical data - a first name and a last name in the format "John Doe".
I want the second word ("Doe") removed from all cells in Column A so that only the first name remains, and I want the first word ("John") to be removed from every cell in Column B so that only the last name remains.
So, where A1 & B1 both started with the data "John Doe" now A1 contains only "John" and B1 contains only "Doe".
#########################################
Part 2:
####################################################
Column C contains addresses in the format:
"#5 - 123 Fake Street, Some City, CA 90210"
There is ALWAYS a comma and a space after the street address, then the name of the city or town followed by more data which may include one or more commas.
I would like everything BEFORE the first comma to remain in column C, and everything AFTER the first comma & space to be moved into Column D of the same row. The first comma and space are not needed again.
So, where C1 started with "#5 - 123 Fake Street, Some City, CA 90210", it now only contains "#5 - 123 Fake Street" and D1 now contains "Some City, CA 90210".
####################################################
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
How do I split numbers!
I have two problems/challenges!
Part I...
I got the answer 1987, and now I want Excel to take the numbers out and display...
1 in one box then i set + in the next, then 9 in the 3ed. box, next box +, then 8, then +, then 7 in the last so that i can have Excel make a SUM of it all to 25.
How do I split 1987 and put the numbers in different boxes?
Part II...
I want to make A=1 B=2... all the way up to 9, then start over again with J=1 K=2... up to 9 again and then over again.
So that if I write my name it comes out as a value of 14 (Odd = O=6 D=4 D=4 =14)
(AJSØ=1 BKTÅ=2 CLU=3 DMV=4 ENW=5 FOX=6 GPY=7 HQZ=8 IRÆ=9, It's the Norwegian alphabet, that's why there are some extra letters)
So how do I set up my Excel so that is ANY name is typed in I can get it out into a number from the values assign?
I have on sheet1 a number (72 at the moment) of Form CheckBoxes.
In simple terms: I would like a macro to look at each CheckBox and remember its state (Checked or Unchecked)
Then, go through and Check All checkboxes
Call MyMacro
Once MyMacro is complete (Filtering & Printing)
Revert the checkboxes to their original state.
The purpose of the checkboxes:
When Checked column on sheet2 is UnHidden
When UnChecked column on sheet2 is Hidden
Or, UnHide All columns on sheet2, run MyMacro, then "re-hide" the columns that were previously hidden.
Here's my problem. I have a cell where there are many data strings seperated by ",". Each data string has a seperate value of its own like for e.g:
A2: aa,ab,ac
String Value
aa 1
ab 1
ac 3
What I want it accomplish is that, split the A2 cell into the different data string entities seperated by ",", then get the corresponding value of each of the data string entity, and to take the average of all the values of the different data string entities.
All data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)
Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines
I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
I have a spreadsheet with some scripting that automatically emails the report to whoever is on the sheet. I'm not sure what kind of scripting it is. I think my boss found it somewhere.
Whenever I scroll either down or up, the first 3 rows disappear and I'm not able to scroll back up. The scrollbar shows that I'm not at the top, but it won't let me go back up. The first 3 rows contain the button to send the email. If I close out without saving and open it again, its fine, until I scroll up or down.
Copying information from various sheets from one workbook to paste into similar sheets in another workbook? It would involve switching back and forth between workbooks.
I found a way (on this board) to spell out numbers...I.E.: 140 = "One Hundred Forty" .
But is there a way to convert "One Hundred Forty" to 140 and format as a number or general or pretty much anything but text? I thought would be as easy as Cell Format > Number
Back Draws! ...
View 9 Replies View Relatedi have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
I have a spreadsheet with over 20,000 rows. From another spreadsheet I need to find if any of a list of 90 customers are within the first, using a simple IF and vlookup formula which comes back yes or no.
I am using: =IF(A2 = VLOOKUP(A2,ihcust!B:B,1),"YES","NO")
However, although this works when they are spelt exact in both sheets if they are not it will say no.
eg. If I was Looking up "Joe's Icecreams" from the list of 90 but in the other sheet it is listed as "Joe's Icecreams (admin)" it would not recognise it and come back no.
Is there away to get around this problem
I am trying to create an IF formula so when i try to get the percentage change if lets say the 2008 number was 0 and the 2009 number increased by 9 than i would get an error so i want the if formula to come back as n/a.
View 5 Replies View RelatedI'm setting up a payroll for several employees in one workbook. I start from the particular employee's worksheet and then I need to go to another sheet where various information is stored and then come back to the original employee's sheet. The current macro works fine if the various information is stored on each employee's worksheet but I can't figure out how to go to another sheet and then come back to my active cell in employee sheet.
[Code] .....
I am currently using this code which automatically saves a back up copy to another location on my system.
However, the only way i can get it to work is to assign it to a command button. Is there any way in which this will work once i just click the save button.
I am currently using this method to create a back-up of the current workbook to another location using a yes/no message box.
If the user clicks no, the workbook will be closed...also if they have not saved any changed data excel also gives them this option in case they close by mistake.
Its the yes option i am having issues with.
If they click yes...the back-up code runs fine and saves the file elsewhere...but for some reason the code loops and runs again. Not sure why this is happening but i do not want it to. Also again if there is any unsaved changes...excel does not give them the option to save this first...i would like this happen.
I want to write a formula that counts back a given no. of columns and averages those cells.
Example:
cell P4 - 4 = cell L4
AVERAGE cell P4 to cell L4
To obtain the number of cells I am going to look back I will be using a VLOOKUP... So that number will be open to change.
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
I have this formula in Column L. The calculations are working fine and I close the file. After I email the workbook from one computer to another and then resave it, every row in Column L that has the formula turns to #NAME?
Do you know why this is happening?
