# Make #NAME? Go Away And Calculation Come Back

Jan 1, 2010

=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)

I have this formula in Column L. The calculations are working fine and I close the file. After I email the workbook from one computer to another and then resave it, every row in Column L that has the formula turns to #NAME?

Do you know why this is happening?

## Formula To Count 12 Months Back For Finance Calculation

Mar 24, 2009

I have a spreadsheet that each month, we populate a new row of data. The rows are already set up in the spreadsheet, but we just populate the new row.

We are calculating a rolling 12 month total. Each month, we have to modify the formula below to pick up the last 12 months.

For example, next month we will populate data into cell M91, then we need to manually modify our formula to read M80:M91. Wondering if there is a way to have the formula below to look at a range, such as M100:M1, and count the last 12 months? This would eliminate us having to change this each month on several spreadsheets.

In Summary: I would like to replace the M79:M90 to count the last 12 months instead of changing the formula each month.

Here is the formula:
=(FVSCHEDULE(1,M79:M90/100)-1)*100

Nov 19, 2008

The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.

## How To Make A Calculation Using Variable Text

Jul 2, 2014

I am trying to make a calculation using variable text.

My outcome cell is D3 and my two variable cells are C3 and F3. In C3 I want to be able to insert a staff members name, of which we have 6 different members of staff. In F3 i need to insert the week number which runs 1 through 6. The outcome is the individuals place on the week roster which needs to be a number between 1-6 inclusive. SO basically if F3=1 & D3=J.SMITH then I need D3 to equal 1 keepng in mind that if F3 & D3 have 6 possible variables.

## If Value Matches Any Other In Column Make Calculation (Algorithmic)

Sep 24, 2013

Identtime altlatlon
a3340.3320004551
a3360.3325004450
a7880.3350004425
a5210.3310004910
a8520.42000453
a9560.51002030
a8410.5580002063
a9650.680002465

I need a formula that recognizes identical times then takes the difference between the altitude, lat, long of the two identical times.

So ideally the calculation that would be performed.

Ident (a334)-(a336) 2000-2500 45-44 51-50
Ident (a334)-(a788) 2000-5000 45-44 51-25
Ident (a334)-(a521) 2000-1000 ''''''' ''''''''''
Ident (a336)-(a788) 2500-5000 '''''' '' ''''
Ident (a336)-(a521) 2500-1000
Ident (a788)-(a521) 5000-1000

I created a pivot table to try to calculate the difference but it cannot do it an a algorithmic type fashion like this. Then eventually I need to conditionally format it to if all three meet a certain criteria that it will put it in a separate chart only if all three conditions are met.

So if Ident (a334)-(a336) 500 1 1 (ex. of all three criteria being met [actual parameters not important but these values will be flagged in my conditional formatting])

This needs to then be put in a separate chart with all other data that meets all three criteria.

So the steps I need to perform this function:

1. Does Ident "x" equal Ident "y" time?

Yes: Take difference between all three parameters. Do all three meet Criteria?

Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "z" time?

Yes: Take difference between all three parameters. Do all three meet Criteria?

No: Generic Algorithim.xlsxEnd

Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "aa" time?

No: End

No: End

No: Move on to does Ident "y" time equal Ident "z" time?

[Rinse, Wash, Repeat]

## Calculating Distances Between Back-to-back Locations

Aug 11, 2012

I have a layout something like the following:

A1
A2
A3

[Code]....

Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).

Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".

Ultimately I am looking to have a matrix which contains all the distances between each location:

A1
A2
A3
B1

[Code].....

## Make Userform Show Data From Spreadsheet And Add Delete Or Make New Entry

Jan 24, 2014

I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.

Right now there are around 600 customers in this list.

I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.

## Make Now () = 06/29/2009 (make To Cells With Dates Equal Each Other)

Jun 29, 2009

I need to figure a way to make to cells with dates equal each other if the
day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09

## Copy The Current Price Back To Sheet1. The Current Price Needs To Be Pasted Back Into Sheet1 (next To The Existing Price)

Jul 24, 2006

All data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)

Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines

I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,

Dec 26, 2008

I have a spreadsheet with some scripting that automatically emails the report to whoever is on the sheet. I'm not sure what kind of scripting it is. I think my boss found it somewhere.

Whenever I scroll either down or up, the first 3 rows disappear and I'm not able to scroll back up. The scrollbar shows that I'm not at the top, but it won't let me go back up. The first 3 rows contain the button to send the email. If I close out without saving and open it again, its fine, until I scroll up or down.

## Back And Forth Between Workbooks

Feb 2, 2007

Copying information from various sheets from one workbook to paste into similar sheets in another workbook? It would involve switching back and forth between workbooks.

## One Hundred Back To 100

Sep 26, 2008

I found a way (on this board) to spell out numbers...I.E.: 140 = "One Hundred Forty" .

But is there a way to convert "One Hundred Forty" to 140 and format as a number or general or pretty much anything but text? I thought would be as easy as Cell Format > Number

Dec 3, 2008

Back Draws! ...

## IF And Vlookup Functions Which Comes Back Yes Or No.

Sep 20, 2007

I have a spreadsheet with over 20,000 rows. From another spreadsheet I need to find if any of a list of 90 customers are within the first, using a simple IF and vlookup formula which comes back yes or no.

I am using: =IF(A2 = VLOOKUP(A2,ihcust!B:B,1),"YES","NO")

However, although this works when they are spelt exact in both sheets if they are not it will say no.
eg. If I was Looking up "Joe's Icecreams" from the list of 90 but in the other sheet it is listed as "Joe's Icecreams (admin)" it would not recognise it and come back no.

Is there away to get around this problem

## Making IF= Formulation Come Back As N/A

Nov 2, 2009

I am trying to create an IF formula so when i try to get the percentage change if lets say the 2008 number was 0 and the 2009 number increased by 9 than i would get an error so i want the if formula to come back as n/a.

## Go To Another Worksheet And Then Come Back To Original

Aug 21, 2014

I'm setting up a payroll for several employees in one workbook. I start from the particular employee's worksheet and then I need to go to another sheet where various information is stored and then come back to the original employee's sheet. The current macro works fine if the various information is stored on each employee's worksheet but I can't figure out how to go to another sheet and then come back to my active cell in employee sheet.

[Code] .....

## Back Up File On Save

Jul 2, 2009

I am currently using this code which automatically saves a back up copy to another location on my system.

However, the only way i can get it to work is to assign it to a command button. Is there any way in which this will work once i just click the save button.

## Workbook_close To Back-up File

Dec 7, 2009

I am currently using this method to create a back-up of the current workbook to another location using a yes/no message box.

If the user clicks no, the workbook will be closed...also if they have not saved any changed data excel also gives them this option in case they close by mistake.

Its the yes option i am having issues with.

If they click yes...the back-up code runs fine and saves the file elsewhere...but for some reason the code loops and runs again. Not sure why this is happening but i do not want it to. Also again if there is any unsaved changes...excel does not give them the option to save this first...i would like this happen.

## Count Back X No. Of Cells

Aug 18, 2008

I want to write a formula that counts back a given no. of columns and averages those cells.

Example:

cell P4 - 4 = cell L4
AVERAGE cell P4 to cell L4

To obtain the number of cells I am going to look back I will be using a VLOOKUP... So that number will be open to change.

## Go Back To Col A Pressing Enter?

Jun 23, 2012

Once I reach Column G and I press enter, instead of going to Col I, How can I get Excel to back back to Col A, but on the next row?

## Column A Disappeared - How To Get It Back

Jul 24, 2012

Column A disappeared and didn't come back. I even arrow over to the left margin, but the furthest it goes is to column B. How can I get my column A back?

## Add Back Button To Input Box?

Nov 14, 2013

I have made a sheet with 10 input boxes, some for text and some for numbers. If you make a mistake now you must click though the rest of the questions to start again and make a change. Is there a way to add a back button that would take you to the last question? Or possibly make the cancel button stop all questions? Here is a sample of the code

Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim strname As String

[Code].....

## How To Add Back Number To Itself Throughout Range

Aug 2, 2014

I am a new to VBA. I want to add a range of numbers to another range of numbers. However second range should always add to itself with first corresponding array values. For example my firsr array is A1:F10 and second array is A15:F25. Now i want A15 = A15+A1, A16= A16+A2, A17= A17+A3 and so on. Every time second array should retain itself value and get added with first corresponding array values.

## Giving Back Focus

May 10, 2007

I've got a Macro that generates three reports for me, one at a time.

After a report has been generated it creates an Email and attachs the report to the Email, I then check the report is ok before sending out.

The problem is, that once the first Email has been generated Excel is pushed into the background and the macro sloooooooows down.

I believe (though I will quite happily be wrong) this is because Excel is no longer the PC's main concern.

What I was wondering was, is it possible to bring Excel back to the foreground once the Email has been generated.

## Add A Total To The Spreadsheet It Comes Back As Zero

Dec 4, 2007

I have cut and paste a series of numbers from my online bank account statement, however, when I go to add a total to the spreadsheet it comes back as zero. I have removed the currency sign from in front of it, I have changed the column format to be numbers but the total still reports a zero.

However, if I type in the number the value is recognized.

## When Returning (Using Back Button) From Www

Jun 24, 2008

I'm finalizing an Excel app - which uses Userforms only. On opening the app I use the code line Application.Visible = False

After clicking on my Label2: (I'm taken to the Web site, but when I click the
< (Back button - Return) I am returned to my Userform BUT my Excel App (Menus, etc) is now showing up. How can I keep it "turned-off"?

Private Sub Label2_Click()
On Error GoTo TheEnd
Exit Sub
TheEnd:
End Sub

## Go Back To Previous Cell

Sep 25, 2008

With "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?

## Formula Back References

Mar 1, 2009

Is it possible to make a back-reference in a cell formula similar to regular expressions?

Example:

=IF(I15=FALSE, [H17 * INDEX(Percentages,I17+1)], IF(A17="", \$1, 0))
...where [ ] indicates the actual reference and \$1 indicates the reference number

## Moving Back And Forth Between Files

May 12, 2007

I am developing a macro where I need to open a file, copy a value from a cell in that file and paste it in a cell of the original file. I need to do this several times from the same two files. My problem is that I don't have a command that moves back to the newly opened file to copy another value and paste it, again, in a cell of the original file. I can't use a specific file name to move to the newly opened file because the new file name changes every day. Here is the command that I use to open a new file:

Dim fn As Variant
fn = Application. GetOpenFilename("Excel-files,*.xls", _
1, "Select The Previous Day's Borrowing File To Open", , False)
If TypeName(fn) = "Boolean" Then Exit Sub
' the user didn't select a file
Debug.Print "Selected file: " & fn
Workbooks.Open fn

I need to move back to file fn several times, but, as I stated above, the file fn changes every day.

## Always Create Back-up Automatically

Aug 15, 2007

How to make sure that every workbook I create has the option of "backing up before saving" turned-on? I need a Excel-wide option, i.e. one that applies to all workbooks created, The known to me facility of turning the option on every time I create a workbook is not satisfactory because often I forget to turn the option on when creating a new book -- and I create many.