Spreadsheet Control With Range
Jan 16, 2010
Hi all im having a tough time trying to figure out a way to select a range (which will be the entire row )based on a condition that will be data selected from a combobox and display that range in a userform with spreadsheet contol 9
what i have so far is a worksheet with all the data.
i have a combobox on a userform that is prefilled with data from a specific column
every thing is working except when i select the entire row how do i change that to a range that i can use in the spreadsheet control 9 that is added to the userform.
View 11 Replies
ADVERTISEMENT
Jan 12, 2007
I have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
View 4 Replies
View Related
Feb 2, 2009
I have an opening balance colum for the month(I5), then a colum for receival stock for each week in the month + total of stock received for the month(O5), also a colum for delivered stock for each week in the month+ a total deliverd for the month(U5). I wish to then calculate the closing balance in (V5)
Therefore the simple formula =(05-U5)+I5 with the product dispalyed in (V5)
opening balance 3 units(I5) receivals =0(O5) deliveries = 3(U5) closing balance should equal =0 (V5). However the product displayed in V5 is incorrect and shows 6
What am i doing wrong? what formula will give me the correct answer to this equasion?
View 3 Replies
View Related
Oct 13, 2009
How do I get the handle for a combobox on a spreadsheet? I have tried ChildWindowFromPoint and RealChildWindowFromPoint without any luck.
View 9 Replies
View Related
Jun 13, 2013
I am working an a userform. I want people to add records to the spreadsheet thru the UserForm ONLY, meaning that if they go straight to the spreadsheet they wont be able to edit anything.
View 1 Replies
View Related
Feb 1, 2008
i have a spreadsheet that uses control functions to run vb code. i am trying to make things as user friendly as possible for all of the employees. i am currently working on a control to clean out any rows that the first cell has a value of "N/A" or is left blank. i have the code for the blank cells, but cannot figure out how to add the "N/A" cells.
here is the current
Private Sub CommandButton2_Click()
Dim rng As Range
On Error Resume Next
Set rng = Columns(1).SpecialCells(xlBlanks)
On Error GoTo 0
If Not rng Is Nothing Then
rng.EntireRow.Delete
End If
End Sub
View 9 Replies
View Related
Feb 22, 2009
I've set-up a basic stock control spreadsheet. Part of this requires updating prices of products. My approach was to use 3 columns A,B & C. C would show the current unit price of a product. Where there is a change in price this would be entered in A which would then result in a new average unit price to be calculated automatically in C. When ever this change occurs i need the then 'old' price which was in C to be shown in B aswell.
I've tried using various averaging formulaes but i'm thinking they were probably to basic or just plain wrong
View 9 Replies
View Related
Feb 26, 2007
I've been working on a spreadsheet to control the 'booking diary' at work and linking it with the movements in and out of our 'chambers'
If you look at Column L & M, they are the volumes and column N is where the 'pallet' is coming / going to .
If you look at line 149 and below I've tried to translate these 'volumes' into movements by time but as you can see it is not to totalled up correctly during certain times.
For example line 158 should total 40 and line 187 should total 80.
Can anyone work it out for me as this happens on numerous lines
View 12 Replies
View Related
Jun 16, 2009
I have a spreadsheet control inside of a userform. I can generally access this spreadsheet and do what I need to do with it. My problem is that I need to monitor it for the cell change event. I normally accomplish this with:
View 4 Replies
View Related
Oct 10, 2013
I have a userform with a textbox and would like the user to type inside the textbox which in turn send the text typed to a cell on my spread sheet say sheet 1 cell ref A1. I am writing the following into the control source Sheet1!A1 but the control source does not except this. I am using excel 2007 .
View 2 Replies
View Related
Sep 12, 2007
I would like to define the range of cells in the sum with a number in another cell. Say I want to sum the past 10 years, I would like the sum definition to be controlled by another cell that includes the number 10.
If I want B1 to be the sum of A1:A10, B2 to be the sum of A2:A11, etc., I would like to be able to control the range of the sum with say, C1, which in this case would contain the number 10.
This would allow me to easily change the range of data I am summing: if I changed C2 to 15, B2 would give me the sum of A1:A15 for example.
View 9 Replies
View Related
Sep 7, 2007
I have built a user form that amongst it's other functions displays the results from three cells on one worksheet.
The values in these cells need to be pasted in three cells on a different worksheet (cells are selected by user using a "RefEdit" field on the form.
The VBA help files offer a single example of the paste special method (I've proven I can paste to the celss but of course that pastes the formula rather than the value!) that shows it operating on a single worksheet as follows:
With Worksheets("Sheet1")
.Range("C1:C5").Copy
.Range("D1:D5").PasteSpecial _
Operation:=xlPasteSpecialOperationAdd
End With
So, simple question...
How can I use the Paste Special method to paste the values of the cells in cells specified by the user?
View 5 Replies
View Related
Sep 4, 2009
I have a workbook with 20 sheets, including a control sheet 'Validation Table'. By setting the required Background/Font in a cell named hdrDefault on sheet VT, I want to click a button on VT to invoke a macro to visit each sheet and set the named Header range, hdrxxx, to the same Background/Font. Originally had the code in a Private Sub linked to a button event, but this can't break out of the worksheet so have moved the Sub into a Module, and calling from the click event:
Event:
View 3 Replies
View Related
Jun 29, 2012
I have sheet where I need to restrict access to a select group of individuals. I have a formula in a select case statement that runs from the workbook_open event and have hard coded the names of the individuals who can access the file. If they are not on the list, they are prompted for a password. This works OK, but I have sheet that is hidden and want to maintain the list of users there and update the code to loop through the values in a named range. I have a snippet of the current code below.
Code:
Select Case function_name
Case Is = "user1"
Run "enable_access_code"
Case Is = "user2"
Run "enable_access_code"
Case Is = "user3"
Run "enable_access_code"
Case Else
' User not authorized or opened while not on company network
' Prompt for project password
form_Password.Show
End Select
View 2 Replies
View Related
Dec 6, 2006
I have a defined range in my workbook which I have not been able to delete (I think it got there through some malware because I didn't create it!)
The main annoyance is that the name refers to another workbook (to which I don't have access) and to a non-existent range therein (resulting in a #REF! error) - so I get the unwanted Update Links message each time I open the workbook. I have created my own workbook with the same name as the workbook referred to by the name, hoping that I may gain some level of control over this gremlin, but to no avail.
The name is "Flow" immediately followed by a thin-lined empty square (like the ANSI character 042 formatted using Wingdings2 font). It could be a line-feed character.
Whatever it is, I have not been able to delete this range name - either directly through the Insert / Name / Define / Delete commands or by using VBA. Using the menu commands I can select the name, edit it (even add a valid cell reference to the workbook name), and click Add - but that just adds a new name "Flow" without the control character and the original name remains! The original name also remains if I select the name and click Delete.
View 6 Replies
View Related
Dec 3, 2007
I'm trying to set up a userform with a refEdit box that allows the user to select a cell range. I then need to assign that cell range to a range variable so the macro can use it. I'm having a problem reconciling the assigned string variable that refEdit returns and the range variable that I need.
So what I'm trying to say is that I can assign the range fine through the Userform, and I can see through the debugging screen that mySampleVariable (dim as a variant) holds a range value of 'Access Dump'!$A$8 (the correct range), but when I try to
Dim myRange As Range
Set myRange = mySampleVariable
The code bugs out because it apparently can't assign a string value to a range variable.
View 4 Replies
View Related
Jan 11, 2008
the macro simply copies a master sheet, then re-organizes/re-sorts the raw data in the new sheet. At the end, I'm trying to set a print range to 1 page wide and inifinity pages long, figure out where the end of the fourth page is, then reset the print range to accommodate four pages. In case it matters, the macro starts with a form that allows the user to input a company ticker and name used in output.
The problem is that when I use the debugging step function (very tedious), it works perfectly. But when I run it normally, it locks up for about 30 seconds when setting the print range to 1 page wide, and cuts off the print range vertically at just over 2 pages tall. Brief explanation of a couple variables:
ColLetter is a function as follows:
Function ColLetter(ColNumber As Integer) As String
ColLetter = Left(Cells(1, ColNumber).Address(False, False), 1 - (ColNumber > 26))
End Function
ActiveSheet.PageSetup.PrintArea = "$A$1:$" & ColLetter(j + 3) & a + 7 .............................
View 2 Replies
View Related
Aug 8, 2008
I want a control to select a range in a userform I'm creating.
I wonder if we can use the same type of control the wizards use, where you click on the right and choose the range? Alternatively, what's the best option?
View 9 Replies
View Related
Jul 8, 2009
I am using a refEdit control on a userform to get a range from the user (they use the refEdit control to click on the desired range). My problem is that the user typically has 3 or 4 different workbooks open and if one of them is maximized withing Excel, the user is unable to get to them to select the range (only the maximized workbook is displayed and usable). Is there a way around this?
View 4 Replies
View Related
Jan 10, 2012
creating 2 fields in my userform that the user can input 2 dates that would serve as the range to set the autofilter. So user inputs field1 = 11/01/2011 and then field2 = 01/31/2012.
I was previously using a month range in my userform, populating from the known months and allowing the user to select a range. Since our data is now spanning a new year, this is no longer possible as I cannot make the combobox range go from 11 - 1 (November to January)
VBA Userform - select months & Months between - Code Included
View 1 Replies
View Related
Apr 3, 2009
I've built the code for a Template form for data entry of a survey. Through Control Toolbox I've created the form and used several textboxes, option buttons, checkboxes and COMBO boxes this one in turn being my trouble.
- Sheet one is called "Data" (this is the place where all inserted information is going to be stored
- Sheet two: "Variables" (here is where I keep the required values for the como boxes - inserted manually apriorely...
Question: What is the code to assing to the combo boxes in order to have the values from the sheet "Variables" of the range A1:A4 - use the comboboxq2 for referee, I'll do the others
P.S. see the code up to now:
Private Sub CommandButtonN_Click()
Dim eRow As Long
Dim ws As Worksheet
Dim inf As WorksheetFunction
Set ws = Worksheets("Data")
Set ws = Worksheets("Variables")
' Find first empty row in database survey
eRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row ................
View 9 Replies
View Related
Mar 31, 2007
How do I limit the user from being able to choose only 1 year after they pick the first date on the first command button?
Here is the code on a userform which has a Calendar Control ...
View 9 Replies
View Related
Mar 4, 2014
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
View 11 Replies
View Related
Jan 9, 2008
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies
View Related
Oct 4, 2007
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
View 3 Replies
View Related
Jan 14, 2010
I am using Spreadsheet control on User form and i just want to set Range as we do for worksheets. but unfortunately it is not working here. and generates the error
Set rng = Spreadsheet1.Range("A2:A" & Spreadsheet1.Range("A" & Spreadsheet1.Rows.Count).End(xlUp).Row)
here spreadsheet1 is spreadsheet control and Error is "Type Mismatch"
View 9 Replies
View Related
Dec 9, 2008
I want to combine & I may be dense, but I just haven't gotten the hang of building multiple functions yet, especially when it comes to knowing when to add zeros & ones, for the index & match functions, as an example.
indexing a range from another spreadsheet, but when I tried to use it again on a different range & copied & pasted and changed the ranges, I get #REF!, which I know means I screwed something up, I'm just not sure what & I don't know what the 1's & 0's mean.
=INDEX(RiskLevel,MATCH(1,INDEX(FREQUENCY(E5,RiskScore),0),0))
View 7 Replies
View Related
Aug 20, 2014
Usually I use data connections (using http://www.....) to pull several worksheets(tables) from another spreadsheet. Currently I had a set of worksheets that created in an unstructured manner, the tables are not entered from Row 1 (see attached mockup). Besides using VBA programming, if there a simple way to connect and extract these tables to a fresh spreadsheet for computation. So the users can continue to perform data-entry and this consolidated spreadsheet will refresh whenever open for reporting and visualisation.
View 4 Replies
View Related
Apr 15, 2008
i have a spreadsheet with a list of students in it and next to it i have a column with their current score and the letter equivilant (A*-U)
so say
joe bloggs 615 B
Joe bog 750 A*
etc
is there a way if I list the grading boundaries for it to work out how many marks are required for the student to reach the next grade?
boundaries are
A* 728
A 669
B 610
C 554
D 467
E 383
F 298
G 214
U under 213
View 9 Replies
View Related
Sep 10, 2009
I currently have a navigation menu with 9 options however these options are based on Range names that I have set up.
The concern is that if someone deletes the cell that contains the range name, obviously that option in the navigation won't work, nor would you want it to.
However if someone re-enters a cell that you would want linked up with the navigation there's a lot more action involved.
What i'm looking for is a macro that can be used through a button, Idealy i'd like the macro to search through column "B" and look for key labels (ex: "Ground Floor", "1st Floor" "2nd Floor" etc.) and have each button set up for it's respective search data (ex. Ground button searches only "Ground Floor")
View 10 Replies
View Related
