I want to show a stock chart in Open-High-Low-CLose format, then I hope that a trend line can be displayed at the same chart, what can I do? It seems like that stock chart can't be merged with another chart
View 7 Replies
On top of these graphs, i draw a line (insert a line shape) corresponding to a certain gradient in the data presented. I do not want this line to be exact (i.e. not point to point) as it is best to be drawn by eye so that the general 'gist' of the data can be found. What i would like, using any method available, is to be able to find the gradient of this line i have just drawn which obviosuly must be done taking into account the scale of the graph. The scales of the graph will not be consistent across all applications.
View 4 Replies View RelatedI've created a graph from data and need to add an average/net impact/trend line to the graph. From what I've read this needs to be an XY scatter, however, several efforts later and I can't seem to get it to work for me.
0514_Costs_DRAFT_ExcelF.xlsx
I am using the the stock chart and I would like there to be a horizontal line across the chart with a y-axis of the opening price. In the end I want this to be in VBA but how to do this manually I should be able to put it in loop of data that will produce many charts with a horizontal line starting at the day opening.
I have tried to add a new series to the chart but I'm using the Candle stick stock chart and the new series comes out as a vertical not horizontal line. I read about using a secondary horizontal axis but all the tutorials I find are in Excel 2003 and they donlt line up well with Excel 2007.
I found this link on charts with horizontal lines but again they are in 2003 and I'm using a candle stick stock chart not a scatter chart. [URL]
I have created three lines between two point.
But if the two point is located at the same horizontal line.
The line cant be produced.
book1.xlsbbook1.xlsb
I have a simple x y scatter graph, to which i have a trend line running through it, fine.
what i need to do is fine some values according to that trend line. e.g. my X axis goes up to 60 and my Y axis goes to 10, so if i draw accross at 55 from the trend line, i then go down to a number on my Y axis.
1. I use a number of x,y pairs
2. From x,y pairs I produce "scatter" type chart
3. From the chart I get trend line and its equation e.g. 5-order polinominal
4. I convert equation into excel formula
5. I apply formula onto the same range of x argument and produce graph
6. The graph is very much different from the trend line!!! I would expect exact match as I use equation/formula for the trend line.
i have a stacked bar chart, similar to this: [URL] What i need is a trend line, similar to this: [URL] that shows the average of the bottom bar to date.
View 14 Replies View RelatedI need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
Is there a way to get an equation for a trend line and have excel automatically export the equation to a cell where it can be used. The only way i currently know how to do this is to manually type the equation.
View 8 Replies View RelatedI currently have in my equation the trend function to linear extrapolate the date a line would cross either my upper or lower limits (100.1 and 19.9) between 2 data points. However if the 2 data points span both the upper and lower limits (as per the 2 attached examples) then unfortunately the trend function is only able to return the 1 date (where I've specified the x value). Is there any way for the TREND function to trend the 2 values? Do I simply add the 2nd x value to the new x's?
I have attached both the data and their graphs to visually explain my problem : EF Workbook.xlsx
I am trying to find the exponential equation from a set of data in excel. The problem is that the graph does not follow the scatter plotted points on the graph. How would you remedy this?
View 1 Replies View RelatedI got a pivot table with following details Row Values: Dept_Code, Super_group, Product_Group Column Values: Ending_Date
Data: Sales, Availability%, Waste%, Number of Stores
i need to have a bar chart with trend line individually on each data items e.g.Sales, Availability% etc. when i tried to use trend line it prompts me to enter series i.e Ending_Date and it draws trend line for only that period comparing all data values. is there any way to have individual graph for Sales, Availability%, Waste%, Number of Stores with trend line covering
The trend Equation on a chart is of the form y= a+x.(b+c.x) I want to use that equation in a spreadsheet to calculate value of y for the value of x. I can do it manually by inserting the a+x.(b+c.x) in a cell but would like it to be automatic as the a, b, c in the Equation changes regularly as more data is acquired.
View 2 Replies View Relatedi have a workbook that contains a series of worksheets. the workbook is a master document list. the first worksheet contains no data. the remaining worksheets are arranged so that A1 has the document number, A2 contains the document title, and A3 contains the review date. Id like to create a search macro that can search for the string entered into textbox1. if this is a number, the macro should search A1:A50 of all but the first worksheets in the workbook, and if its text, the macro should search B1:B50 of all but the first worksheets.
the macro should then select the cell containing what was searched. then id like the macro to prompt me and ask if id like to modify the reviewed date to todays date. d like to be prompted to continue searching for other records if they exist, and after that loop has finished to set the focus back to the search textbox.
Is it possible to put in Trend Lines when creating a stacked column chart?
I've tried in Excel 2003 and 2010 but it doesn't appear that it is possible.
Attached I have my data - there is stock price information (monthly basis) as well as analyst upgrades / downgrades / or initiations.
Is there a very neat way to create an annotated stock chart for these ocurences - perhaps using symbols along a line chart that pots out the monthly stock price on the y axis and the months on the x axis.
I have a series of data and want to create a chart looking like this
Google Image Result for [URL] ...
Where it shows min/max on the error bars, quartile 1/3 on the box and median as a scatter plot. My data is a simple table
Group
Amount F
Amount M
Median F
Median M
Median F+M
[Code] ....
Here F = Female, M=Male and the chart should show all calculation for both gender together (I have another thread up where the gender are separated with the Title (How to create a stock column chart with error bars?? (Both gender separated))
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedI am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies View RelatedIs there a way to display only the current month and the past 11 months in a Line Chart in Excel? So if I was to print Jan 2008 Excel graph, it would only display Feb 2007 - Jan 2008 data charting.
The spreadsheet of the data contains data for Jan 2005 - Jan 2008 so far, but only the current month with the past 11 months should display in the line chart depending on what is the current month.
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies View RelatedI have a pareto chart(Bar & Cumulative Line Chart) that I would like to have the line orginate at x = 0 & y = 0 without changing the position of the other points on the line chart.
Basically this is for better visual appearance. When I add a 0 to the table, it skews the alignment of the line chart with the corresponding bar chart.
Attached is the sample data worksheet. Chart 1 is XY type chart using Seconds (2nd column of sample sheet as x-axis from 42510 to 42530). How do I change it to Line chart using Time (1st column of sample sheet as the X-axis) retaining same data from 42510 to 42530 on both primary and secondary axis?. And how do I again change it back to XY chart?
View 3 Replies View RelatedWhat is the easiest way to have a cell update with real time stock quotes for a particular stock?
View 4 Replies View RelatedI have created a stock sheet on Sheet1, i have say 100 items and each item has a min and max stock order. Once the item hits a min low, the last cell (O) will display an order needs to be placed.
I was wondering if there way a way that on sheet2, it can calculate all the data on sheet1 and if there is stock that needs to be ordered, it will appear on sheet2?
This way i can just print sheet2 and send it to the supplier without having the entire 100 items displayed -if it does not need to be ordered?
From a chart in Excel I need to automatically calculate what the annual percentage growth rate is of a trend line. How to automate this in Excel? I've attached a sample so you can see what I'm trying to accomplish.
View 6 Replies View RelatedI can create a column chart in excel comparing sales in 06 v's 07 for each month in 07, what I'm aiming to show on the chart is how sales have grown or not over a comparative period. A simple enough graph, I end up with about 24 columns (2 for each month and then a gap between each month).
I now want a line chart to show the performance of an index over the same time period, lets say the FTSE100.
I don't know how to get the line chart under the columns on the same graph, using the same x-axis with a small y-axis to the left. I could propably figure out the y-axis bit if I could only get the line chart below the columns.
