Stop Tool Tip Flicker On Mouse Over
Nov 9, 2006
In my application threr are command buttons. it is required that as the user place the mouse pointer on the button a tool tip should be displayed which describes the functionality of the button. i have used a lable and its default visibility is set as false. In the mouse move event of the buttons i am making the visibility of the level true. Its working fine but my problem is due to mouse move all the buttons and an image in the sheet flikers. so how to avoid the flikering? Is there any other method to display the tool tip with out using the mouse move event.
View 5 Replies
ADVERTISEMENT
Nov 16, 2007
I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
View 14 Replies
View Related
Nov 16, 2007
I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
I've look the properties of this to objects and can figure it out.
View 10 Replies
View Related
Jan 12, 2010
I'm having a problem with the screen flickering whenever a different cell is selected due to a ComboBox. I searched the forums and wasn't able to find any code that helped my problem. The fact that I wouldn't know where to insert the proper code to fix it even if I could find it doesn't help. That's why I assume the "optional code" listed at the end that I found online does not work properly because it probably isn't in the right spot. Here's the
View 12 Replies
View Related
Jun 27, 2008
I have three sheets that I use in my 2003 VBA program: Sheet_Source, Sheet_Destination, Sheet_Status. I'd like to have the Sheet_Status keep focus while in the background information is being copied from Sheet_Source to Sheet_Destination. On Sheet_Status, I have progress boxes checked off as the program goes through its stages.
I do have a working program; however, as the program executes, the screen keeps jumping from one sheet to the next as the copying back and forth is being done.
View 5 Replies
View Related
Jan 10, 2008
I have a userform that opens a woorkbook and fills some textbox from that woorkbook. Although that it goes very fast it is still visible (sometime just in the toolbar) and flickers the screen. Is it possible to open it "hidden"?
Private Sub UserForm_Initialize()
Application.ScreenUpdating = False
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Calc").Activate
Label4 = Range("K7")
Label5 = Range("L7")
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Caption = Now
TextBox1.SetFocus
Application.ScreenUpdating = True
End Sub
View 3 Replies
View Related
Apr 17, 2009
I attached 2 examples. The first one is before the screen flickering fix I got from Andy Pope. The second is when I added the fix. When you open Example List 1 and you enter 0 at E180, the screen will flicker, but it will change (red) Watching to (green) Planning to Watch in G180.
When you open Example List 2 and you enter 0 at E180, the screen doesn't flicker anymore. The status Watching in G180 still changes to Planning to Watch, but it stays red while it has to become green. How can I have the color changes and no screen flickering? Marco:
View 5 Replies
View Related
Jun 30, 2008
I have a VBA code that copy data from multiple files into my workbook.
I find the first file, copy the ranges I need into my workbook and continue to the next file until all files are done.
The copy operation in each file is - row by row - because I need to ask questions about each row.
As you understand - what the user sees is a flickering window because I activate the source workbbok -> copy the data -> activate this workbook-> paste the data.
I want to avoid the flickering.
An acceptable solution could be to generate a pop up message box that will say "data is being copied. Pleasd wait while operation is completed". BUT - I don't know how to identify that the action is done and message box can be closed.
View 8 Replies
View Related
Dec 13, 2006
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies
View Related
Feb 18, 2008
Within the 'tools' menu option you have 'Macros'. On a standard tool bar you have the option to record a new macro, edit......, however sometime last week I created a custom button and placed icons on my tool bars that allowed me to click them to record new or run custom made macros. After a clicking the 'custom macro' buttons a few times by mistake, I decided to remove the custom buttons in the hope of returning the macro options (within the 'Tools' menu option) back to normal. However this has not been the case. Now I have no option to record a new macro the the 'tools' menu system.....it has disappeard. Please could someone tell me how I can reset the 'Tools' menu system back to normal?
View 10 Replies
View Related
Dec 17, 2006
I am trying to create a simple translation tool for my product catalog, which is in Japanese, to English.
I have the Japanese and the English terms listed in a file (say, File A) in Col A and Col B which will keep increasing every week.
I want to create a macro which goes thru this list and replaces ALL the Japanese terms to English in "ALL THE SHEETS OF THE PRODUCT CATALOG" (say, File B) .
I have created a button in File A so that when I press this button, I browse my computer, select the file (product catalog) to be translated, replace all the Japanese terms to English terms in ALL THE SHEETS and saves it under a different filename.
View 14 Replies
View Related
Apr 1, 2009
I'm a big fan of the old crossword these days so i decide that i will try and create a crossword creator in excel!
problem is i'm not sure how to use the Thesaurus tool?
Lets say i have a string in cell A1 how would i modify the string using the thesaurus?
also any idea how i can randomly generate a word?
View 5 Replies
View Related
May 31, 2009
I have an application that I attached to this post, which I have been working on, for the last four or months, in my free time on the weekends and the last part I need some help with. The doc has been updated with new macros and a chart.
I would like help with a macro that I can activate and cause a message box to appear when I open the excel doc. I would like also to be able to activate the message box and its associated macros after the document has been opened. If you look on Sheet1 of the attachment you’ll get an idea of where I am trying to go with the message box. I would like it to have
- Message “The Current Time is (Macro puts current computer time here)”
- Question “How much time do you have?” then beneath this question
- Blank field labeled Hour to give answer
- Blank field labeled Minute to give answer
Depending on the current time on the computer as well as the hour and minute entered, a macro with a matching title (each macro includes a time, hour, and minute in its Sub name) a code in VBA will be selected that fits that criterion. For example, let’s say it is 5:30am and I entered 1 hr and 15 min in the empty fields of the message box. As a result the macro named “Sub Hour1Min15time530am” will be activated. Also due to the fact that the macros I have are in 15 min intervals the code would need to round to the nearest time, so if it was 5:33am when I ran the code the macro would default to 5:30am whereas if it was 5:39am when I ran the code the macro would default to 5:45am. You’ll see time controls at the bottom of the application. If I can get the code I am looking for those are going to be removed.
View 5 Replies
View Related
Jun 3, 2009
I am making a Program search tool for my company. I would like the operator to type a part number into a cell. If the part number is valid (from a master list on a different sheet), then I would like to pull the information from the master list and populate a few cells on the search worksheet.
Example:
An operator types: "W3303-01" in a cell and clicks a button. The macro would populate cells on that worksheet with information from another worksheet that pertains to "W3303-01"
View 3 Replies
View Related
May 2, 2009
I have 143 macros, but I put 8 of them here b/c the post would not go through with all of them. I couldn't fit all of them on an attachment either b/c the file size was too big. However, I have this goal I have been working on for the last three months on the weekends and the last part.
I would like help with a macro that I can add onto the ones I have. I would like the macro to activate and cause a message box to appear when I open the excel doc. I would like also to be able to activate the message box and its associated macros after the document has been opened.
I would like the message box to have
- Message “The Current Time is (Macro puts current computer time here)”
- Question “How much time do you have?” then beneath this question
- Blank field labeled Hour to give answer
- Blank field labeled Minute to give answer
Depending on the current time on the computer as well as the hour and minute entered, a macro with a matching title from the list below will be selected that fits that criterion. For example, let’s say it is 5:30am and I entered 1 hr and 15 min in the empty fields of the message box. As a result the macro named “Sub Hour1Min15time530am” will be activated. Also due to the fact that the macros I have are in 15 min intervals the code would need to round to the nearest time, so if it was 5:33am when I ran the code the macro would default to 5:30am whereas if it was 5:39am when I ran the code the macro would default to 5:45am.
View 7 Replies
View Related
May 18, 2009
Do we have NumericUpDown Tool Control in MS Excel 2003 that can be employed on a userform. The one similar to the numericupdown of VB.NET. I want to restrict user to input only numerals. Though I can use IsNumeric Validation in Textbox_Change event but still I was curious to know if there is any other in-built function in MS Excel.
View 2 Replies
View Related
May 24, 2007
i have about 500 excel files that are built to specific format, only some data changes.
I need to make same changes to all the 500 files, so i'm asking that is there any kind of tool (free/commecial) that can batch changes to all files?
View 9 Replies
View Related
Jan 25, 2007
I want to let my buttons on tool bar in group status, there is a saparator bar between two groups, what can I do? I tried but no any result.
View 2 Replies
View Related
Jan 21, 2014
I have 2 sheets, one with users and a tool they have been using, and one with a list of unique users, I would like to count how many unique users are using a tool. The sheets are set up like so,
Sheet 1
User Tool (number of uses)
abcdefg 1
hijklmn 5
1234567 1
1234567, abcdefg, opqurst 2
wxyz123 0
Sheet 2 Have they used the tool
abcdefg
hijklmn
1234567
wxyz123
opqurst
So yes, I am trying to count whether or not the unique users have used the tool, this is a simplifed version as my data set runs into the thousands. I was using the countifs function, but that doesnt count properly if theres more than one user in the group.
View 4 Replies
View Related
May 14, 2009
I've been look for an excel tool to draw venn diagrams with the 'circle' size in propartion to the set (population) sizes and the correct degree of intersect.
Having no luck I've made one myself - it's not pretty (the code sure is ugly) but it get's the job done.
May not work in versions earlier than xl07 - haven't been able to test
So take a look - pull it to pieces all you want.
**Warning**
Attachment contains Macros
**********
Orginal text in thread:
Silly question..but that's never held me back.
View 4 Replies
View Related
Apr 27, 2008
I am preparing Vendors' Directory for our company. This Directory has different products listed in seperate sheets. The names, phone numbers and address of various vendors' are listed in each sheet.
My problem is that I want to create a new sheet with a find tool that will search particular name of the product or the vendor from all the sheets (say product A, product B) and list out complete information in single page.
I have attached a sample excel sheet which is supposed to search the name "Daniel" from sheets - Product A and Product B and list it out in the first sheet. The sample does not work.
View 12 Replies
View Related
Mar 9, 2012
I use this code to hide the tool bars in a workbook, the code works but when I go to a new sheet the row and column headings are visible. I tried several things that didn't work.
Code:
Private Sub Workbook_Open()
Application.ScreenUpdating = False
On Error Resume Next
With Application
.DisplayFullScreen = True
[Code] ..........
View 1 Replies
View Related
Jul 9, 2012
How to use the Camera Icon Tool using a Macro?
I want to copy the First Row which is the Column heading of one Sheet to a different Sheet
Example : From Col A till Col G First Row is to be copied as an Image. Normally I do it using the Camera Icon, however when I tried recording a Macro for the same it did not work..
So how do I that if I provide the Start Column and End Column Alphabet as a Variable is that possible.. I want this Image to not remain Volatile which is the case using the Camera Tool..
So, how do i get the picture of only the first row or any row and store it is an Image in a different sheet as static picture so that even when the sheet is moved to a different location it does not make a difference to the Image.
View 9 Replies
View Related
Aug 16, 2013
I have an upholstery business and I have created a workbook containing multiple sheets (proposal, invoice, sales order log, etc.. ) Following, I have saved it in Template format, which I open and save by order number somewhere else. The issue is, I don't know how to track what the last order number I used was....
Is there anything I can work using excel that will allow me to make that easier without having to go open a window and looking at the last order number after arranging the workbooks by name inside a folder?
View 4 Replies
View Related
May 21, 2014
I am a Supply Chain intern at a company for the summer. One project I have been given is to create a tool in excel that allows our purchasing people to type in certain inputs (origin, destination, etc.) to calculate the total cost of shipping an item from a supplier in anywhere from china, to somewhere locally. I am gathering quotes for shipping via ocean and truck. How can I get where I enter in one location, say shanghai, china, shipping to another location, say Norfolk, VA, and get the total mileage difference to show?
View 1 Replies
View Related
Aug 17, 2007
way the date are shown can be changed by the date format tool, provided the date was entered the correct way. I think we are missing each other. I think the way the date was entered (17.08.07) and converted to (17/08/07) was good. At first it was in text so one wouldnt have known whether it will be taken as yymmdd, ddmmyy, mmddyy etc. well it end up like as 17(yy), 08(mm), 07(dd) instead as 17(dd), 08(mm) and 07(yy). My Q now is is there a way (formula) to swap these orders around...?
View 9 Replies
View Related
Apr 14, 2008
Came across a spreadsheet that my firm created, where you can click on the column header and it automatically sorts ascending order for the column without messing up the other columns. Then if you double click it again, it will sort in reverse order.
View 9 Replies
View Related
Dec 4, 2008
how to work with RefEdit tool within a userform!
eg: say I use RefEdit to select a range and I want that range to be in Bold.
Just give me a small code using RefEdit to perform the above action. I hope then I can use it in a larger way.
View 20 Replies
View Related
Jul 30, 2006
1: two colums of data for each car (lap distance covered and speed). Now each driver is going to decide to brake at different points.
2: i have coner data (eg corner 1 is at 150meters to 200 meters, corner 2 is at etc)
3. I am trying to create something that will do the following.
determine the lap distance at which the driver is braking (the point where speed decreases). I would like to do this for each corner and each driver. I am struggling to find a way of determining how to read the "lap distance" value when the corresponding "speed" value stops increasing and actually starts to decrease. This is the point at which the driver is braking
View 9 Replies
View Related
Apr 16, 2012
I've created a spreadsheet containing 200+ entries for my companies suppliers. These include their name/code, contact emails and contact number. This list is far more easily accessible as it saves the user having to bring up the suppliers details within our own bespoke software. However what seemed like a nifty spreadsheet has quickly turned into a giant mush of details with no way to quickly find the one you want without scrolling down to the one you want.create a function/tool that can allow me to type the contact name in cell "X" and have Excel take me to the suppliers line in the table?
View 14 Replies
View Related
