I'm looking to combine today's date and a string in the same cell. This is what i've come up with:
The problem is that this gives today's date in a numerical value rather than in "short date" form like I want. If i format the cell as a date it doesn't change anything.
Whatever the method, for what I'm doing it has to take place in on single cell.
I need a formula that will calculate the number of days from a date entered into cell A1 to today's date. Whether it's before or after todays date. Example:
5/10/2009 to today is -9
5/22/2009 to today is 3
If a1,a21,a41 have a value greater than 0, I wish to stamp cell b1,b21,b41 and so on with todays date, but without the stamped value changing/advancing tomorrow. At the moment cells b1,b21,b41 are copied down as follows. =if(a1>0,TODAY(),"") This works fine, but the date stamp of course changes tomorrow. I can not apply code to the whole b column as cells b2:b20, b22:40 etc have other non-date format data to which the code does not need to apply - the todays date value cell occurs every 20 cells.
View 6 Replies View Relatedhow I can create a formula that would highlight the cell in a colour if the date was past todays date? This is what I'm doing - I have the expiry date of people's insurances. so e.g todays date is 8 th January, so if the insurance had expired 31.12.08, i would want the cell to be highlighted red. I think it may be an IF function but I cant remember.
View 3 Replies View RelatedI need to VBA code that will loop through the active sheet for all rows, column C2 through however many rows there are. Col C contains a date in the format: mm/dd/yyyy. I need the VBA to compare this date to today's date+30 days and if the date in C2, etc. is greater than today's date + 30 days, shade the row a particular background color (e.g., 3).
How to check cell from a " DATE" column has todays date or not?
View 9 Replies View RelatedUpon opening a spreadsheet, I would like a macro to highlight the cell which contains todays date. This will be selected from a range of dates which are already populated in column B. Is it possible to have a macro which can select the cell in column B which contains today's date? If possible, please could you include the code for doing this upon opening the spreadsheet. I'm not too confident about that either!
View 4 Replies View RelatedI've got the following function that check if each cell has a date greater than TODAY(). If result is true, it'll display "NO GO". Otherwise, it'll display "GO".
I would want to improve on it such that if any of the 'B5:F5' cell is empty, it'll display "Incomplete" instead of "No Go".
I've been using the following code and would like to add another IF that checks the value of a cell to see if it holds today's date.
Code:
If Range("E" & CStr(LSearchRow)).Value "Closed" Then
If Range("E" & CStr(LSearchRow)).Value "Closed w/o Customer Confirm" Then
'Select SR in Sheet to update
Range("B" & CStr(LSearchRow)).Select
[Code] ......
I tried to modify it to...
Code:
If Range("E" & CStr(LSearchRow)).Value "Closed" Then
If Range("E" & CStr(LSearchRow)).Value "Closed w/o Customer Confirm" Then
If Range("AK" & CStr(LSearchRow)).Value "=today()" Then
'Select SR in Sheet to update
[Code] ......
I've tried a couple of other things but no success
I have 22-08-08 in Cell A2 I would like it to change to 22-09-08 on 23-08-08 ideally using edate (but not neccessarily).
Perhaps I can add a formula with conditional formatting eg formula is = "On Today()+1 Add 1 month to cell A2"
I’ve been searching the forum but am struggling to find exactly the information I need!
I’m trying to get a column of cells to update with the date that the cells contents change to “Y”. I had been using the formula =IF(I7="Y",TODAY(),"-") in cell J7 but this updates the date every day. I need this date to remain the same as when it’s first populated.
I’ve been trying to cut and paste text from existing posts into the Visual Basic code but am new to this so am not getting the results I need. I had tried:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
'will put date in column B when something is put in A
If Target.Column = 9 Then
Target.Offset(0, 1).Value = Date
End If
End Sub
But this caused all sorts of problems! I then tried messing around with:
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
On Error GoTo enditall
Application.EnableEvents = False
If Target.Column = "I" Then
If Target.Value = "Y" Then
Excel.Range("J").Value = Date
End If
End If
enditall:
Application.EnableEvents = True
End Sub
But this doesn’t work either. In fact, both these codes are probably riddled with errors as I’ve been trying to learn by trial and error!
I have made the macro that does as ,soon as i open the file, select today's date but only if date is in sheet5... sheet 5 is may so it works. Doing the same job for every sheet in the file.
View 10 Replies View RelatedI would like to know how to use a VBA code to insert today's date into a specific cell (B9) when any cell in column B (B2:B8) has changed.
View 3 Replies View RelatedIf cell a1 equals todays date add cell b2s value to it and put the new date back into cell a1.
View 6 Replies View RelatedI'm trying to create a workbook which has dates in column B, starting with row 10. I'd like to have a code which will hide the rows if the date is less than today upon workbook open. This would need to apply to worksheet1 only.
View 1 Replies View RelatedI have a row that contains each date for the year in B5:NB5. I would like to have a button or macro that will jump to the cell containing today's date.
View 4 Replies View RelatedI would like to highlight (conditional format) the "response required by" (Row A) cells / dates if the "current date" (cell $B$2) is exceeded AND if the "response provided By" (Row B) remains BLANK:
Current Date
=Today()
Response Required By
Response Provided By
29-10-2013
23-10-2013
[Code] .......
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm‎
I am trying to get the results of the number of days between today and a future date. I am using ="cell containing futuredate"-today() and it gets me the correct number of days. The problem comes in when I have yet to populate the future dates. I am getting -39991 (numeric value between today and jan 01 01) and because I am also using conditional formatting this is even more of a problem. Is there a way get excel to display nothing if it is a negative number? or to give a specified resut if the number becomes negative such as Expired or something of that nature?
View 3 Replies View RelatedTrying to do a linkback from another post located here but not having much luck doing it: [URL]
I'm working with 2 date columns and trying to filter a view to only include projects with dates within 3 months of today's date.
I've attached a current working file of the data and the end result i'm hoping to achieve via a macro of some sort.
I've manually got it to work via formula by inserting 2 additional columns (highlighted yellow) which determine if the dates "YES" fall in this 3 month time frame of "" blank if not.
create a macro which does all of this automatically without modifying any columns if this is possible
I have a worksheet that has a sent date and expected delivery date I need create a macro that will alert me if today's date is within 5 days of expected delivery date.
View 14 Replies View RelatedTrying to automate the period part of the impt function
To calculate current value of loan i have the below formula below with the 3 being the current period
=IPMT(4.3%/12,3,5*12,-7000)/(4.3%/12)
What i would like to do is for the period to be self calcuating from current date and the loan start date. I can return a value in days using start date - today() and aware month function returns the month number but stuggling to find a way to work out cumulative month from the start date.
is it possible to display the week number of todays date (today()) from a physically entered start date (which would obviously be week one), the start date would be november 4th 2013.
View 3 Replies View RelatedOn A3: D10 I have information on C1 a have date and E3:E10 I will input date
i.e. If the date entered in E3 is the same as or larger than the date on C1 then Blank the entire line A3: D3
Cell B1 contains a date, then B2 contains a formula that says:
=IF(A1>TODAY(),A1,A2)
A1 contains a green tick and A2 contains a red cross.
What I am trying to add is that if B1 contains no date then B2 needs to be blank.
I tried using =IF((A1="",0),(A1>TODAY(),A1,A2) to get it to show a 0 if there was no data but this doesn't work.
I am using Excel 2003.
I have a formula
=AL260-WEEKDAY(AL260,2)+MATCH(AP260,{"Monday","Tuesday","Wednesday","Thursday","Friday","Saturday","Sunday"},0)
The formula looks at the chosen start date (AL260), and then uses a displayed text day (AP20) to display the relvent date to the text day, this works fine however if the start date is say 08/08/14 (a Friday) when the formula detects a Monday (this copies down a range looking at the start date and the text days to produce dates on each line, the formula displays the Monday dates prior to start date, is there any way to alter this to make it display the dates ahead of the chosen start date?
I'm trying to filter 2 date columns to include only data containing dates within 3 months of today's date.
I see there is a data filter option for "next quarter" but not 100% sure if this covers the quarter from today's date?
how can you automatic the date to today's date when you open the excel file?
ie.
Price Report For 02/25/09