I am trying to add one cell from every sheet of my workbook to the first page. I have renamed all the pages, and I don't know if that is screwing things up, but I just want to do a simple SUM on one page from a single cell on all the other pages.
View 3 Replies
I am trying to change the page set up setiings to fit to 1 page for 56 worksheets within a workbook.
View 7 Replies View RelatedSheet 1 is my main page containing all my data, full of formulas and is protected. Sheet 2 is a simple sorting page with no color and is simply for sorting and printing.
Sheet 2 has IF formulas refrencing rows and cells on Sheet 1.
Example Sheet 1 A2= Bob
Sheet 2 A2="" until I put in this formula:
=IF(Sheet 1!A2="","",Sheet 1!A2)
Now Sheet 2 A2= Bob
Simple...
But when I delete a row in Sheet 1 (using my cool new macro...long story)
I get #REF! in the cells on my sorting sheet, as I should I guess, because there is no more row there to reference. It's annoying, but what do I do to fix it without just unchecking the #REF! in autofilter on Sheet 2.
I just want to eliminate #REF!
Do I need to put something else in the IF formula?
l need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
View 9 Replies View RelatedI have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
View 10 Replies View RelatedWhat I want to do, is to populate the Lois, Beth, Kelly and Shelley pages with the rows from the Que page when they get assigned to one of them. I tried to program then off of a different example in the forum. It didn't work. Will include the copy.
Tracking(HELP).xlsx
I'm not sure went wrong but my code was working fine until I protected the worksheet. Then I made some changes to the code by adding code to unprotect the sheet before running the code and then protecting it again when complete. That didn't work. I unprotected the sheet and ran the code again and now I'm getting a Run Time Error and the code stops when it attempts to set the Page Breaks which was previously fine. Because the data I use to generate this report is based on data from another report that does not need to recalculate before running. I have a Worksheet Activate Private Sub that sets the Application Calculation to Manual. When the sheet is deactivated it sets it back to Automatic. Hence the line in the following code to calculate this worksheet. When attempting to debug the line that highlights is the first line that attempts to set the page break that corresponds to the matching location criteria from cell A2.
Private Sub Worksheet_Change(ByVal Target As Range)
Application. ScreenUpdating = False
Application.EnableEvents = False
ActiveSheet.ResetAllPageBreaks
Range("A24").Value = Range("A1")
Range("A25").Value = Range("A2")
Range("A26").Value = Range("A3")
Range("A27").Value = Range("A4")
Range("A28").Value = Range("A5")
Range("A29").Value = Range("A6")
Range("A30").Value = Range("A7")
Range("A31").Value = Range("A8")
Range("A32").Value = Range("A9")
Range("A33").Value = Range("A10")...................
In my header I am trying to show the current page number and the total number of pages in the workbook. So if I have 10 pages in my workbook, page 5 would read "5 of 10".
I have this in my header "&[Page] of &[Pages]". All worksheets with 1 page read "1 of 1" and worksheets with 2 pages read "1 of 2" on the first page and "2 of 2" on the second page.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
I have a table that lists names, eligibility and # of people. That is just one worksheet. I have a total of 30 worksheets in that workbook. The column with the names is completely filled out. I entered a number in the eligibility and # of people columns and Excel copied all three cells (name, eligibility and # of people) to the same cells on all of the worksheets. I have no formula in any of the cells, nor do I have anything linked.
Example:
1st worksheet - e19 - John Doe, f19 - Yes, g19 - 4
That information is then put on all of the other worksheets in those same cells, even though the worksheets are not linked in any way.
I'm trying to print populated rows from 5 different worksheets. I can get them to print out onto 5 different sheets of A4 but would ideally like them to print underneath each other (continous and use less paper) as some times one sheet may only have one populated row.
Application. ScreenUpdating = False
Dim printer1 As Range
Dim printer2 As Range
Dim printer3 As Range
Dim printer4 As Range
Dim printer5 As Range
Sheets("xxxx").Select
Set printer1 = ActiveSheet.Range("a9", Range("i65536").End(xlUp))
Sheets("xxxx").Select
Set printer2 = ActiveSheet.Range("a7", Range("i65536").End(xlUp))
Sheets("xxxx").Select...............
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies View RelatedI want to set up a few workbooks with 11 sheets. Sheet 1 will in effect be an index, with True or False values in say cells D5:D14. The True/False values will be generated by form control check boxes in some of the workbooks and by IF(TODAY()>xxxx formulas or similar in other workbooks.
I then want to be able to hide or unhide sheets 2-11 based on the True/False values in cells D5:D14 in sheet 1.
I have a workbook that has a lot of worksheets. I want to merge all the worksheet data, skipping blank rows from each worksheet and simply appended the data on one single worksheet. The goals is to just copy the data from worksheet b and append to worksheet a>copy data from worksheet c and append to worksheet a> etc. etc.
View 9 Replies View RelatedI've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
I am trying to do a macro and I want to add in a worksheet. I use the code
"Sheets ("Template") .Add"
but I keep getting an debug error. I did this in another macro but cannot find it. I need to add a specific name at the start of adding in a sheet as the sheet number increments change based on how many times you have run the macro. I know this is a silly format issue but I could not find anything in my book or searching this forum.
Is there a way to copy page setup settings from one workbook to another in VBA?
Example, I have a spreadsheet with 5 tabs with each of them different page setup options.
I have a second spreadsheet with 5 tabs where I need to make the page setup the same for each tab as the saved spreadsheet #1.
Background: This is a workaround for not being able to do copy/paste special values for pivot tables. My workaround is to save an .xlsx as a .mht then reopen and save as .xlsx. The only problem is that I lose page setups through the process.
Is there a way to copy page setup settings from one workbook to another in VBA?
Example, I have a spreadsheet with 5 tabs with each of them different page setup options.
I have a second spreadsheet with 5 tabs where I need to make the page setup the same for each tab as the saved spreadsheet #1.
Background: This is a workaround for not being able to do copy/paste special values for pivot tables. My workaround is to save an .xlsx as a .mht then reopen and save as .xlsx.
I am working on creating a summary page for my workbook. I want the code to create a destination sheet called Summary, then look at each sheet in the workbook, check for a value >0 in cell N7, if it is >0, the copy the tab name and the value in N7 and paste it into the destination sheet starting in cell A1(text of source tab name) and B1(dollar amount). Then move to the next sheet in the workbook and copy paste if N7 is >0 sheet name and value. It needs to skip the sheet XMOE. The Summary sheet would then create a dollar amount subtotal of the values copied from the sheets and populate it into Cell D1. Cell C1 would state "Workbook Subtotal"
I would like the code to delete any sheet where N7 = 0.
I am looking to create a summary page to show open items within a log of initiatives. The workbook has 21 different tabs logging initiatives by the each individual person and also 9 other data tabs. On the tabs containing the initiative logs, it states whether the initiative is open or closed and I only want the summary tab to show the open items. Is it possible to do this?
View 1 Replies View Relatedcan anyone show me the way to run a macro when visual basic editor opens
View 5 Replies View RelatedI have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
I generate several reports, all saved as seperate files, with the same page settings (margins, headers, footers, etc.). Is there any way to copy these page settings from one file to another so that I don't have to enter the settings seperately for each file?
View 13 Replies View RelatedI've been trying to code a macro that will select a worksheet (that has formulas) to copy just the values into a new workbook. I want the page setup data to also be included. It seems that if a select the workbook and do a copy, it includes the formulas. If I select the cells, then do a paste/special values into the new workbook, the page setup is the default one. Each worksheet that I want to copy/paste has different page setup values and I'd like to be able to carry over the page setup. Otherwise, I have to have code to do all the page setup in the macro. There are over 20 worksheets and it's slow.
This code does the copy/paste special but no worksheet page setup is included
Worksheets("Data1").Range("A1:E22").Select
Selection.Copy
Workbooks.Add
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveWorkbook.SaveAs Filename:= _
"U:My DocumentsLearning VBA filesTestNewWorkbook.xls"
Windows("ProjectFilesChapter07 test.xls").Activate
I have produced a table of contents using the following suggested code:- [URL] .....
Is there a way of getting the contents page to exclude the first three tabs of the work book.
At the moment my table of contents is including the cover sheet and table of contents.
Is it possible to have an "if then" statement that would send the user to another page in the workbook? For instance..... =IF(D12="Mobile","Sheet2!","Sheet3!"). I know this does not work but is there another function that would do it? I am very new to vba and am sure it is easy there but I do not have a good handle on it yet.
View 5 Replies View RelatedI have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
VBA that will put the Sheet's file name & a dash with the sheet name in cell M1 when the sheet's name is changed (right click sheeted tab & rename).
For example:
When changing tab named Sheet2 to 08-39 for the workbook TaxWorkSheets.xls,
put in cell M1:
TaxWorkSheets.xls-08-39
I am trying to code a Macro so that i can take all the worsheets and save them as individual Workbooks. I wrote a macro that appeared to work, but, after it saves the first sheet as a workbook, i get a debug error.
MS VB Script error:
Runtime error '9':
Subscript out of range
Any advise would be greatly appreciated.
Thank you
Code is below..
Sub saveall()
'
'
For Each ws In ActiveWorkbook.Worksheets
ThisFN = "C:Documents and SettingsUserDesktop" & ws.Name & ".xls"
I = I + 1
Sheets(I).Select
Sheets(I).Move
ActiveWorkbook.SaveAs Filename:= _
ThisFN, FileFormat:=xlNormal, _
Password:="", WriteResPassword:="", ReadOnlyRecommended:=False, _
CreateBackup:=False
Next ws
End Sub
