I am looking for a formula that will add the 8 highest values in a range of up to 20 cells. The range may have fewer than 8 values in some cases in which case the sum of all those values will be returned.
Thus a row with these values will yield the following output (bold denotes highest 8 values):
8, 28, 45, 13, 17, 19, 21, 30, 47, 8, 15
47+45+30+28+21+19+17+15= 222
I have a row of upto 20 numerical entries, (1,1,2,2,10,10,3,3,4,5,6,7,8,12,1,1,7,8,9,11) what formula do I use to go about getting excel to return the two highest numbers?
In this example I'd want excel to return the numbers, 12 and 11
How do i take the three highest numbers from E4:E5 & E13:E14 and add them together in E26
View 3 Replies View RelatedI am trying to add the highest 4 or
View 9 Replies View RelatedI need to know how I can create a formula which will sum a selection of the highest numbers in a range of data. So for example, if I have a row of 10 cells each containing dfferent numbers, and I want to take the 7 highest values from there and get the sum of these values, how do I go about this?
I've tried using the LARGE command but can only get an individual figure.
I'm trying to wrap up a spreadsheet and I'm trying to figure out how to have my formula use the highest of 2 numbers when making a calculation.
For example:
If:
Cell A1 = 5000
Cell B1 = 3828
I want the formula to use A1 in this case. However, if the total of B1 = 6000, I want the formula to use B1 instead of A1 in the calculation. (A1 = 5000 will always be a constant/base).
Is there a way to average only the X highest number of scores in a row?
What about if there is an additional condition, i.e., if the column
heading says "Quiz", for instance, instead of "Test"?
I have A bunch of numbers going up to 4.0 from 0.0 how can i get it so that it takes the number and the name beside it and buts it in a colume from 1 to ..... complete
ex)
David 1.5
Jon 3.5
Sally 4.0
Susan 3.24
Fred 2.99
I came up with a way to extract entire row corresponding to the highest number in L column and to post it in the different sheet.
I have 2 issues to solve though.
1. I need to extract only 13 ranges corresponding to the highest number in L column - ( A through M) - not entire row.
2. I need to do the same with the second and the third highest numbers of the same column L.
This is what I have so far:
Sub extract()
Dim first As Range
Set first = Range("L" & WorksheetFunction.Match(WorksheetFunction.Max(Columns("L")), Columns("L"), 0))
first.EntireRow.Select
Selection.Copy
Sheets("Result").Select
Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
End Sub
I want to pick the top five numbers out of a random list of numbers and get its average. What is the best way to go about doing this?
View 2 Replies View RelatedI am looking for a way to find a highest (and/or) lowest value in a list of numbers. The list keeps getting longer and after a certain point I will need the 2 highest (or lowest), then the 3 highest (or lowest). I know MIN and MAX will find the high and low, but how do I find the 2nd highest, etc?
View 3 Replies View RelatedI am looking for a formula to extract numbers from a list in descending order. As the list may have more than one entry of the same number the formula i need should only show one of that particular number.
So in effect
Column A
40078
40025
40001
40003
39972
41224
40025
40078
40001
Hopefull end result
Column C
41224
40078
40025
40003
40001
39972
Suppose I have a column filled with numbers in fraction. And correspondingly I have a specific name for every 10 numbers. I want to find out which is the maximum among the 10. For this I could use the "MAX" function in excel. Similarly I have to find the maximum among the next 10 numbers. Since I have about 200 such numbers under 20 different names and eight such sheets (10 numbers per name), it becomes difficult to type the formula and select the range everytime. I would like to know if there is any shortcut for getting this highest number among the 10 numbers.
Eg.
Name Value Number
TU 489.662.272
TU 380.450.0379
TU 331.970.0475
TU 309.641.004
TU 300.890.1215
TU 288.840.0501
TU 280.090.022
TU 278.580.0115
TU 270.160.0397
[code]....
I have thousands of drawings listed in colums and each in the row has revisions P01 to P10 for Proposal and C01 to C10 For Construction. Is there a way of getting the highest revision of all listed in a row without turning them into numbers when P is older than C , but 1 is older than 10? MAX function doesnt count when value consists of both - number and letter.
Manualy selecting the highes revision will cost me weeks... and brain damage.. as I have thousands of drawings and more are coming...
I am trying to generate a list of the 5 highest and 5 lowest numbers from a list of scores that range from 1 to 10. I have found the highest and lowest absolute values (numbers over 7.5, and less than 5, out of 10), but I would also like to generate the 5 highest and lowest relative numbers, ie. if there are no scores over 7.5, then the 5 next highest numbers. I have used if/then formulas for the absolute highest and lowest numbers, and a rank/countif formula to rank them. I have no idea how to generate a list of the "relative strengths and weaknesses".
View 14 Replies View RelatedI must determine out of 52 radom numbers the average of the 48 highest even
if one or more of the lowest numbers is repeated 7 times without exempting
the 3 out of the 7 that must be included in the 48 to extract the average.
Assume Cell A2 + A3 as the fraction: 60/100. How can I get the smallest fraction (3/5 in cells B2+B3). I do not want to use the build in cell format for fractions)
There are a few samples of want I would like to get a s the result (Red Digits). I will appreciate 2 ways: via VBA Code and via Sheet Build-In Functions.
I can't find a way to sort my data. It looks similar to below. And I need to sort them based on the numbers from lowest to highest.
Tom Simmon (23.2)
Jason Paige (19.1)
Jeff Johns (14.1)
I have two sheets:
Sheet one has dates, my prices on each of those days, and the fields h1 h2 h3 h4 (h1 is the closest higher number, h2 is the next closet higher number, etc.) and l1 l2 l3 l4 (l1 is the closest lower number, etc. etc.)
Sheet two has certain dates and prices of a competitor's prices.
What I'm trying to do is two things (see attached):
1) find the four closest higher and four closest lower prices (if available)
2) use only the prices that are on or before the date in question.
I've tried combinations like LARGE and OFFSET and so far it is not getting me anywhere.
Can this be done???
I have a list full of different IDs with different version numbers (This format: AKH123.1).
I'm trying to clean the list - removing all duplicate IDs but leaving only the largest version number.
I managed to remove the last digit using LEN/VLOOKUP and removing duplicates, but leaving only the largest version number is too tricky for me. I've thought about trying something with LARGE but can't wrap my mind around it.
My thought process went like this: I want to find all occurrences of "AKH123" and return the largest one.
The list contains about 8000 entries and this would save en enormous amount of work.
Here is a tiny portion of the list:
AKH450.1
AKH451.1
AKH451.3
AKH451.4
AKH451.5
AKH451.6
AKH451.7
AKH451.8
AKH452.1
AKH453.3
AKH454.1
AKH455.1
AKH455.2
I have imported and filtered a .csv. to specified sheet names. I have rows that have been sorted by a specific column's cell contents. i.e.
A B C C E F G H I
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
I need to be able to select all the rows or ranges that contain a common value 1's and then loop back and select the next group 2's of rows until the row or column contains "".
I have a large spreadsheet of data that contains 3 columns: Columns are Name, Revision, # of items. I want to find the # of items for the highest revision for each name. List looks like this:
Smith, 1, 30
Smith, 2, 36
Smith, 3, 18
Johnson, 1, 125
Johnson, 2, 130
Lopez, 1, 8
Lopez, 2, 12
Lopez, 3, 15
etc…
I'm only interested in the data for the latest Revision. There's over 500 names. A lookup or pivot could be possible?
i want my formula to look up the highest value from a range (the =max column), then return a name in the leftmost column. What it actually is, is a player of the month for fantasy football. Each week the player gets a score, then each month, a total of four weekly scores. i want to look up who scored the most and return the player name to me. see the attachment.
View 2 Replies View RelatedBasically I want to get the highest value in a cell from a range of cells on another sheet within the same spreadsheet......
The problem is that the values in the range of cells I want it to look up are not just straight values but rather the summary of two other cells as follows:-
=IF(BN5<"",BO5&" - "&BP5,"") which means that the Values in the cells that the formula needs to search will read something like:- "1250 - B Builder"
Also, cell BN5 is where the archers 3rd highest score gets entered and as such only at this point in time do they 'qualify' for the Standings Table Sheet.....
Then, with luck I can look for the second highest score in the next cell down from looking at the same range and so on and so on.....
In the attached sheet, I'm trying to get excel to return the top 5 values in an array, based on the preceding cell. This example is for a Football League, in which the QBs, RBs and WRs all have different salaries. The objective is to return the salaries of the top 5 paid people in each. Don't need to return the name, just the salary amount, so that an average can then be taken to figure future salaries.
View 5 Replies View RelatedIs it possible to highlight the highest value within a given range in that particular cell ? Example: I have a range of value from cells A1 to A10. The highest value is in cell A3. Can I make cell A3 highlighted in colour red?
View 5 Replies View RelatedI have a simple list of alphanumeric asset numbers,
AKR DC 0001
AKR DC 0002
AKR DC 0004
And so on, I want to run a piece of code from a user form which will return the highest value in the range plus one on the numeric portion. I can find the largest value easily with a sort and last used cell value and I could drag out the numeric portion, increment and crowbar it back in but I'm sure there is a more elegant way.
All asset codes follow the same naming convention and all reside in column a of the active worksheet.
I have three columns in one Sheet (Sheet 1). The Columns are: "A" - Student Name; "B" - Start Date; "C" - No. of Courses; "D" - ID Number. The columns contains student data for 50 kids all in random order.
On a different Sheet (Sheet 2), I want to list the Student Names (Column "A" of Sheet 1) of the Top 5 students, according to their Start Dates (Column "B" of Sheet 1) latest to earliest. If two students start in the same date, I want to rank them according to the No. of Courses (Column "C" of Sheet 1) for the duplicates (large to small), and then by the Start Dates for the rest of the student. And if the Start Date and the No. of Courses for two students are the same, I want to rank them according to the ID Number (Column "D" of Sheet 1) for the duplicates (Small to large), then by the Start Dates and finally by the No. of Courses for the rest.
In addition, Sheet 1 has other information in corresponding cells stretching up to Column "J". When the Top 5 rankings will be made in Sheet 2, data points for the students shall automatically be pulled from Sheet 1 and inserted in corresponding columns within Sheet 2.
I understand its a very complicated problem. I challenge is exacerbated by the fact that I cannot use the sort function. And If the data is changed in Sheet 1, the Top 5 rankings will automatically update with the new information in Sheet 2. In addition, I am not to use VBA and have to complete the project using regular Excel functions.
how can I get excel to show the highest and lowest figures in a range to display in another 2 cells. Can this be done without having to sort the data and remove all of the other rows except highest and lowest. I am using Excel 2003.
View 5 Replies View RelatedI am trying to work out how to select a range from a formula.
One formula works out when a specific number in a list of rows is reached, and returns the number of values it counted before it reached the number.
MATCH(TRUE,INDEX($A$2:$A$50>=B1,0),0)
With the figure returned from that can I then select the range from the first row, to the number of rows counted. And with that selection find the highest number within that range, specifying the highest number as the result?