Basically I want to get the highest value in a cell from a range of cells on another sheet within the same spreadsheet......
The problem is that the values in the range of cells I want it to look up are not just straight values but rather the summary of two other cells as follows:-
=IF(BN5<"",BO5&" - "&BP5,"") which means that the Values in the cells that the formula needs to search will read something like:- "1250 - B Builder"
Also, cell BN5 is where the archers 3rd highest score gets entered and as such only at this point in time do they 'qualify' for the Standings Table Sheet.....
Then, with luck I can look for the second highest score in the next cell down from looking at the same range and so on and so on.....
Basically, I have a worksheet that shows test results for 6 separate tests. If an objective is met in a test then it is marked with an "X". If an objective is partially met then it is marked with a "/" and if it is not met then it is marked with a "." . I have now created a combined column where I want to collate whether an objective has been met at all across the 6 tests.
For e.g. if in the range H14:M14 there is an "X" then N14 should show "X". If there is no "X" but there is a "/" then N14 should show "/" and it there are neither values in the range then it will show "." .
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
I have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.
Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.
I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.
I need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
----------------------- ...| A | B | C | D | E | F | ------------------------- 1 |....| * |.........| 7 |... ------------------------- 2 |....................| 2 |... ------------------------- 3 |....| * |.........| 6 |... ------------------------- 4 |....................| 1 |... ------------------------- 5 |....| * |.........| 5 |... ------------------------- 6 |....................| ? |... -------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
I have a large spreadsheet of data that contains 3 columns: Columns are Name, Revision, # of items. I want to find the # of items for the highest revision for each name. List looks like this:
i want my formula to look up the highest value from a range (the =max column), then return a name in the leftmost column. What it actually is, is a player of the month for fantasy football. Each week the player gets a score, then each month, a total of four weekly scores. i want to look up who scored the most and return the player name to me. see the attachment.
In the attached sheet, I'm trying to get excel to return the top 5 values in an array, based on the preceding cell. This example is for a Football League, in which the QBs, RBs and WRs all have different salaries. The objective is to return the salaries of the top 5 paid people in each. Don't need to return the name, just the salary amount, so that an average can then be taken to figure future salaries.
Is it possible to highlight the highest value within a given range in that particular cell ? Example: I have a range of value from cells A1 to A10. The highest value is in cell A3. Can I make cell A3 highlighted in colour red?
I am looking for a formula that will add the 8 highest values in a range of up to 20 cells. The range may have fewer than 8 values in some cases in which case the sum of all those values will be returned.
Thus a row with these values will yield the following output (bold denotes highest 8 values):
I have a simple list of alphanumeric asset numbers,
AKR DC 0001 AKR DC 0002 AKR DC 0004
And so on, I want to run a piece of code from a user form which will return the highest value in the range plus one on the numeric portion. I can find the largest value easily with a sort and last used cell value and I could drag out the numeric portion, increment and crowbar it back in but I'm sure there is a more elegant way.
All asset codes follow the same naming convention and all reside in column a of the active worksheet.
I have three columns in one Sheet (Sheet 1). The Columns are: "A" - Student Name; "B" - Start Date; "C" - No. of Courses; "D" - ID Number. The columns contains student data for 50 kids all in random order.
On a different Sheet (Sheet 2), I want to list the Student Names (Column "A" of Sheet 1) of the Top 5 students, according to their Start Dates (Column "B" of Sheet 1) latest to earliest. If two students start in the same date, I want to rank them according to the No. of Courses (Column "C" of Sheet 1) for the duplicates (large to small), and then by the Start Dates for the rest of the student. And if the Start Date and the No. of Courses for two students are the same, I want to rank them according to the ID Number (Column "D" of Sheet 1) for the duplicates (Small to large), then by the Start Dates and finally by the No. of Courses for the rest.
In addition, Sheet 1 has other information in corresponding cells stretching up to Column "J". When the Top 5 rankings will be made in Sheet 2, data points for the students shall automatically be pulled from Sheet 1 and inserted in corresponding columns within Sheet 2.
I understand its a very complicated problem. I challenge is exacerbated by the fact that I cannot use the sort function. And If the data is changed in Sheet 1, the Top 5 rankings will automatically update with the new information in Sheet 2. In addition, I am not to use VBA and have to complete the project using regular Excel functions.
I have a row of upto 20 numerical entries, (1,1,2,2,10,10,3,3,4,5,6,7,8,12,1,1,7,8,9,11) what formula do I use to go about getting excel to return the two highest numbers?
In this example I'd want excel to return the numbers, 12 and 11
I need to know how I can create a formula which will sum a selection of the highest numbers in a range of data. So for example, if I have a row of 10 cells each containing dfferent numbers, and I want to take the 7 highest values from there and get the sum of these values, how do I go about this?
I've tried using the LARGE command but can only get an individual figure.
how can I get excel to show the highest and lowest figures in a range to display in another 2 cells. Can this be done without having to sort the data and remove all of the other rows except highest and lowest. I am using Excel 2003.
I am trying to work out how to select a range from a formula.
One formula works out when a specific number in a list of rows is reached, and returns the number of values it counted before it reached the number.
MATCH(TRUE,INDEX($A$2:$A$50>=B1,0),0)
With the figure returned from that can I then select the range from the first row, to the number of rows counted. And with that selection find the highest number within that range, specifying the highest number as the result?
Could any of you Excel bods please help me find the correct formula to enter in order to calculate the following reasonably simple sum:
3 cells with numbers, say, 1, 3 & 7.
I simply need to get my worksheet to look at all three cells and then calculate the result of adding the biggest and smallest number together. i.e. 8 in the example given.
For instance, I want to highlite the highest value in certain cells (Red).
Example: Find max value E4 and E15 E5 and E16 E6 and E17 And also is there a way to have this happen automatic without selecting a macro. I want it to always be in the sheet1 when I open it.
I WANT it to search all of column A for the highest number in the range (which will change daily to a new high number above the highest currently), and return the value in column 4 (column D) that corresponds to that value from column A. This is what I have, but it is not working, it is giving me the number (1) in Cell A800 (which is the lowest valued number in my range. The numbers range in value from 1 to 762 with none repeating (they are sequential). The formula I have is : =+VLOOKUP(MAX(A76:A2000),A76:I2000,4)
I have a column that updates automatically by placing a value in in the next blank cell in the column. I am trying to write two formulas to identify the highest and lowest values in the preceding 10 cells of each update in the column but seem to be stuck in MIN/MAX/OFFSET hell.
I have a cricket excel sheet that contains batsmans scores over a season. These scores are kept in non-contiguous cells for each game (ie. D5, J5, P5, V5 etc..) In the cell next to the score is an option for the user to enter an '*' to denote a not out score (these are in E5, K5, Q5, W5 etc.)
I can sort out a formula to find the highest score (from D5, J5, P5, V5) and place this high score in a cell elsewhere - but what I really need to do is to check if the high score is not out by looking to see if there is an asterisk in the adjacent cell, and then place the score AND asterisk in another cell.
I have a data listed from A1 to G1. What I want to do is
Check out all the numbers written in those cells, take the highest number among and write to the following cell (lets say A3) also Check out all the numbers written in those cells, take the lowest number among and write to the following cell (lets say A4)
I have a column that is filled with different names. Some names appear more than once. There is one name in fact that appears four times.
I am looking for a formula, or VBA if that's necessary, that will look through the range Y2:Y50, and return a value of 4, because the person that has the most duplicates, her name appears 4 times.
If everyone's name appeared only once, except for a person whose name was in that range twice, then the formula would return a 2.
