Sum Range Using VLookup?
Aug 1, 2013suming a range, always staring with the "1" and then to what ever the vlookup is. so if the lookup value is 15 in column A, it would sum the %s from B1 to B15.
1
4%
2
2%
3
3%
4
3%
[code]....
ADVERTISEMENT
Vlookup Between Range?
Dec 3, 2013I have a spreadsheet with columns A B & C
So in Column A would be the beginning range (E.g. 2000000) and B would be the end (3000000) with a description in C.
I have another spreadsheet which contain results between Colum A & B, e.g 212000 and would like to do a lookup to return the description in C?
Start End Description
10000002000000Result 1
20000013000000Result 2
30000014000000Result 3
Using Vlookup In A Range
Jun 11, 2014I am trying to use a vlookup for two cells whose data are in a range of cells. The grid is in a range for weight and miles.
Weight
1000
1100
1200
[Code]....
For the example above, I have miles ranges in columns and weight ranges in rows. My output for the example should be 1025 as it falls in the 201-250 Mile and 1300-1399 Range. Is there a vlookup or a match/index that could find that output without looking through the grid?
Date Range VLookup
Apr 10, 2014It's a quick formula question that I have trouble solving..
See attached : LookupSample.xlsx
VLookup Using Named Range
Jan 14, 2014I am trying to do Vlookups across multiple sheets but cannot make it work. My result is #VALUE!
When I look at the Function Arguments it says the Table Array is Volatile.
My named range "Centers" has 19 tabs listed.
=VLOOKUP(A114,INDIRECT(""&Centers&"!A5:R395"),13,0)
Vlookup Value That Falls Into Specified Range?
Jun 12, 2014I have a list (a) with distances and another list (b) that gives numbers to certain distance ranges. For instance:
[Code] ...........
Now, if I have a value of 4.5 in list (a), I want to look up the respective zone. For 4 classes, this can be done with an if formula (=if(4.5>50;Zone 4;if(4.5>25;Zone 3;if(..and so on))).
What can I do if I have lets say more than 100 ranges with respective zones (ranges not of equal size) because an if formula will not be feasible anymore?
VLOOKUP: Range & Return
Jan 10, 2007Q1: In the range for the lookup I'm performing, the column with the possible match is the 2nd column. I've tested my function with this range, but it fails (range is $A$x:$K$x, with possible matches residing in column B). If I change the range so the 1st column has the desired data ($B$x:$K$x), it works. Can I modify the function to search using the 2nd column so I don't have to rearrange the columns in my worksheet?
Q2: Can I return an entire rold of data? If yes, how? I only know how to return one cell.
Vlookup Over Range Of Dates
Feb 2, 2010I am making a spreadsheet using excel 2003 to calculate sales and tax. Column B is formated for date (1/1/2010). Column D,E, and F are formatted for currency with column D=Total Price, column E=sale price, and column F=tax. In column B I type the date the transaction took place and in column D I type total price. Columns E and F are automaticly filled in with the formulas for same. In column H,I J row 9 I would like to calculate 1st Quarter Total Price, Sale Price, and Tax. Row 10 would hold 2nd Quarter info and so on. I searched for info but can't come up with any thing that works.
View 3 Replies View RelatedLooping For Vlookup In A Range?
Jun 16, 2014I have a 2 X 44 range of text cells in one worksheet. The first column includes the same array of variables that are found on a second worksheet. In the second worksheet I want to run a looping vlookup to check if the column in the second worksheet is empty, if it is not I want it to lookup the element in that column in that row from the first worksheet and return the 2nd column item to the adjacent column in the second worksheet.
When I run my program in its current form two problems happen. The first row in the range of the column I want the data returned in is empty, and for the rest of the rows the same value is returned, when it should in fact vary. I think part of the problem is that in my vlookup my entries are:
vlookup(CrudeType, Range("Sources"), 2, false) where crudetype is defined as Range("c2:c" & lrow). This is the C column on the second sheet, I want my output in the D column. Range("sources") is on the first sheet and covers D2:E45.
[Code]....
Vlookup On Dynamic Range?
Aug 20, 2014I'm trying to find a way to perform Vlookups against a dynamic range of data, where the number of rows/values in Col B is always subject to change.
The way that the workbook is structured is as follows:
Sheet1: Except for Cols A & B, this is a blank sheet. This is the sheet in which the vlookup values will need to fall into based on the number found in its' Column B
Sheet2: The sheet that contains the data that will be passed into Sheet1 via vlookup, and all of its Columns contain data.
So, basically, Sheet1 is a shell that needs to be filled with data copied over from Sheet2 based on vlookups against Col B.
The vlookups will need to be shifted back 1 column.
And examples of how the Vlookups need to work is:The value in Sheet2 [Col E], needs to get passed into Sheet1 [Col D]Along those lines:
The value in Sheet2 [Col F], needs to get passed into Sheet1 [Col E]
The value in Sheet2 [Col G], needs to get passed into Sheet1 [Col F]so on and so forth
So basically, all of the values passed into Sheet1 from Sheet2 need to be shifted back by 1 column until we reach the last Col (Col M in this file).
Where
The value in Sheet2 [Col M], needs to get passed into Sheet1 [Col L]
The number of columns will remain fixed, but again the number rows will vary week to week in both of the two sheets, so I would need to have a way of creating a Vlookup through VBA that accounts for the dynamic range in Col B.
Named Range In VBA Vlookup
Oct 31, 2007Chik wee (as Borat might say),
I'm wondering? is there any way that you can use a named range for the array in a vlookup that is done in VBA?
my named range is "Lists" and here's my
VLookup Using A Date Range
Feb 2, 2009I am hoping to do, is change a table's information based on a date range that is specified by the user. I have attached an example workbook below. In the example, on the Data sheet, there is the raw data information, showing user name, the date in question, and finally a number that refers to employee productivity on said date.
What I am hoping to do is to incorporate a vlookup function in order to change the data recovered on the Chart sheet by having the user select a date range. So that if you wanted to view the statistics for just Dec 15, 2008, it would only poll the data from that date, and if you wanted to view the statistics for any dates between Jan 1, 2009 and say Jan 30, 2009, it would do the same.
VBA - VLOOKUP In Dynamic Range
Oct 14, 2011The workbook I'm working on has several sheets: Totals, Monday, Tuesday, etc set into a SheetArray.
The problem is that I'm trying to perform a VLOOKUP on data in worksheet "Monday" against column A in worksheet "Totals". However, the size of column A will change as the codes iterates through the days. Therefore, I need the range of column A in the Totals worksheet to be dynamic.
Code:
'Find any new projects in the daily data that are not in the Totals.
DayProjCount = Range(Sheets(SheetArray(A)).Range("AA2"), Sheets(SheetArray(A)).Range("AA2").End(xlDown)).Cells.Count
ProjCell = 2
With Worksheets("Totals")
[Code].....
During this process, the code should only find 1 error in ValidProject. But, each are throwing errors. I think it's because the VLOOKUP isn't searching through the correct range, but I don't know how to check it.
Dynamic Range In VLookup
Apr 10, 2012I have a workbook with 100 worksheets. Each worksheet is setup the same way with dates down column A, and data in column B. In another sheet, I need to run a vlookup on the dates and data, but I need it to adjust for whatever spreadsheet name I give it. Is there any way to have the vlookup table array change as I change the worksheet it should reference?
View 2 Replies View RelatedVLookup IP Address In A Range
Apr 12, 2012I am attempting to categorize IP Addresses. My lookup table looks like this:
Begin End Category
1.50.50.0 1.50.50.255 3
5.185.40.0 5.185.43.0 2
5.22.22.65 5.22.22.128 5
I have a list of IP addresses that need to be categorized.
IP Address Category
5.185.41.15 2
1.128.128.0 Null
1.50.50.128 3
The category column needs to be populated. The ranges in my look up table are not end to end (there are gaps).
Function Lookup got close, but assumed there were no gaps.
How To Specify More Than 1 Lookup Range With VLOOKUP
Sep 4, 2012Is there a way that I can do a vlookup in 1 file and specify more than 1 data range to lookup the data in?
In this case I have one file to put the vlookup in and a second file with more than 1 tab and I want to have it search each of those tabs and return the result. The format of these sepatate tabs are to each other and for that matter, identicle to the main file.
Filtered Range For VLOOKUP To Use In VBA
Oct 23, 2012My first worksheet contains the following information:
Column A contains parent category names (e.g. colours)
Column B contains lookup values (non-unique)
Column C contains value to return
Each subsequent worksheet is for a single parent category (i.e. a sheet per unique category)
I'm unsure how to write some code that will return column C for each worksheet
Example of first worksheet:
A
B
C
1
Group
Item
Amount
[code]....
From this, my code creates 4 new sheets named Red, Orange, Blue and Green with column A containing the item numbers that relate to the worksheet name in the table in the first sheet (e.g. column A in sheet Red contains item numbers 1 to 6 inclusive):
A
B
1
Item
Amount
2
1
x
[code]....
In column B, I could like to return the values in column C from the table in column C that are only specific to that worksheet name.
I think I want to filter column A in the first sheet against the sheet name and then perform a VLOOKUP on the filtered data or would using a dynamic range be better?
Using Date Range For VLookup?
Feb 13, 2013I want to run a vlookup (against cell D1 for this example), from a selection of date cells in column A (cell A1 in this example), where the date can be plus or minus a set number of days from the value in the cell (2 days either way in this example).
When I try the following it does not work:
if((A1-2)>A1>(A1+2)=D1,vlookup(D1,D:E,2,0))
Just to clarify, if D1=05/11/2012, I want the vlookup to return if cell A1 is equal to Nov 3rd, 4th, 5th, 6th, or 7th.
PS: =if(or(a1-2=d1,a1-1=d1,a1=d1,a1+1=d1,a1+2=d1),vlookup etc etc) returns the correct result, but if the date range I search on changes I don't want to rewrite the formula in this format.
VLOOKUP Using Named Range
Jun 26, 2013I have a vlookup formula that works when looking up one specific value (ie F2 in example below)
=VLOOKUP($F$2,'All active PRs (RP6)'!B2:L2,12,FALSE)
But now, I want to lookup a range of possible text values (say F2 to F8 which would all have different text values). I've created F2 to F8 as a named range called ISS_Services and created a new formula
=VLOOKUP(ISS_Services,'All active PRs (RP6)'!$A2:$L2,5,FALSE)
But it doesn't want to work consistently. Can vlookup work in this scenario?
VLookup With Name Of Range In Cell?
Jun 20, 2014I want to do a Vlookup where the area/range that its looking at is named in a cell
So if my named Range is F226_0713 and that value is in Cell C13 How do I right the Vlookup to look for the Value in B17 in the named ranged identified in C13 and column index is 3 (rows over)?
Vlookup Variable Range
Nov 16, 2007I am trying to do a vlookup that currently looks as follows:
Range("C2").Formula = "=VLOOKUP(A2,SAP!A$2:AA$42,2,FALSE)"
However, the selection of the table_array (SAP!A$2:AA$42) is a set value. Instead I would like to select all the data that is on sheet SAP. The idea is that the data set will not always be A2:AA42, so I need to make this part variable.
Normally I would use
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
to select the entire data set.
Range Arrays In Vlookup
Mar 9, 2008I have been creating my own custom Estimate/Invoice system for my Renovations business. I am really stuck on something. I have scoured my Excell Bible, asked numerous message boards and noone is able to help. I did find a reference to my issue here but it still left me confused.
Here is my issue.
I created multiple lists for my materials database. They are broken down by categorie…such as Drywall, Tile, Doors & Windows, Hardware, Etc. right now I have 14 lists which I continually add items to as they come up.
Each list are exactly the same, 3 columns Item, Unit, Cost.
I am try to do a Vlookup to access the cost of an item from these list. Please keep in mind that no item is EVER THE SAME.
I can make a simple vlookup work for example searching my drywall materials database VLOOKUP(A1,Drywall,3,False) with Drywall being the preset list range.
However I want my Vlookup to search EVERY MATERIALS LIST for the specified item. I have tried inserting an array into Vlookup that looks like this (List names are restricted to save space)
VLOOKUP(A1,{Drywall,Tile,Hardware,Paint},3,False)
But I can not get it to work, I can get one single list name to work but not an array of them. Is this possible?
Lastly If statements will not work here as I have upwards of 14 lists and If statements only allows nesting up 7 times for a limit.
Vlookup For A Range Of Dates
Sep 3, 2008Here is an example of what I am trying to do. I have a date in column A on Sheet 1. In Column B I want to return the period for which that date falls.
I have created a list of Start and End dates for each period in Sheet2. The start date is in Column A of Sheet2. The End Date is in Column B. And the resulting Period is in Column C.
Basically if the Date in Sheet1 Column A falls in between the start and end date for a specific period. I want that period returned in Column B of Sheet2.
VLookup And Range Names In VBA
May 23, 2009I have the following
title = Application.WorksheetFunction.VLookup(Q, Range(QandA), 2, False)
QandA is a range that is defined in the active workbook. The code excutes without error but TITLE does not get a value because QandA is reported as empty (when I position my cursor over it).
I have also tried:
title = Application.WorksheetFunction.VLookup(Q, Range("QandA"), 2, False)
Unspecified Range In Vlookup
Aug 18, 2009Im looking for a way to make the range in the vlookup below a little more dynamic by using the same kind of idea as ive shown in the MATCH part of the statement.
VLOOKUP(A1,Sheet1!F:Z,match("TEXT",Sheet1!$1:$1,0),false)
Basically i can confirm that 'Z' is my end row, and this remains consistent, however my 'start column' (F) needs to be more flexible as it may not always be column F, either by specifying a column name like using the MATCH function, or using INDIRECT
I was trying to use something like this, but im certain this is not the correct way of doing things (and it doesnt work anyway );
VLOOKUP(A1,Sheet1!(columnletter(column(match("STARTCOL",Sheet1!$1:$1,0)))):Z,match("TEXT",Sheet1!$1:$1,0),false)
COLUMNLETTER is a function to turn the column number back to the letter
VBA - How To Make Range Dynamic In VLookup
Sep 30, 2013I have this code which looks information in a table. The problem is that the table is getting every time bigger.
Here the code:
VB:
With Worksheets("Sheet10").Cells(9, 3).Resize(, LastColumnf - 2)
.Formula = "=IFERROR(CONCATENATE(VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,3,FALSE),""."",
VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,2,FALSE)),"""")"
.Value = .Value
End With
How can I write $A$10:LastNewRow... Another problem rises here, LastNewRow might end up being the oldLastNewRow, i think. But maybe since it is getting bigger, there is no problem, I don't know.
Instead of having a static reference like $C$550 I would like to have a dynamic one.
VLOOKUP With Negative Values On Range?
Jan 25, 2014I am currently working on a project and encountering this problem with VLOOKUP.
I need to show the result into negative since it is negative on the table i made.
In my this scenario, it gives me this error "#N/A" even if the value is in the table.
Here are the details:
3 columns
RANGE Minutes
0.02
0.03
[Code].....
my actual table is upto minutes of +960 and -960 and still planning to go up until +1500/-1500
I have named the table as "TABLE" and the value is on "F3" I am using the command =VLOOKUP(F3,Table,3,TRUE) but if the cell is negative it return positive value how do i change the formula so it return the value to negative if it shoud be negative?
I also attached the file as your reference.
I need this to get the value in minutes if it is within the value in the range.
Cell Value To Define VLOOKUP Range?
Feb 26, 2014is there a simple way to do a vlookup (or any other more appropriate formula) using the value of another cell to define the named range relevant to that lookup.
eg I will have two different ranges for fitness performance levels, each of these will be named "Male" and "Female".
I would like to do a lookup based on a formula as follows: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas  Z100 =vlookup(D4,NAMED RANGE,2,false)Â
the Named range would be a value in the same row ie B4 - being Male or Female
so I am hoping for something like Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas  Z100 =vlookup(D4,B4.Value,2,false)Â
otherwise I could just use an If and do something like: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas).
Many more Excel Formulas  Z100 =if(B4="Male",vlookup(D4,Male,2,false),vlookup(D4,Female,2,false) )Â
Vlookup If Range Of Cells Greater Than 0
Jul 3, 2014I have made a spreadsheet that essentially works out a cost dependant on which department the work was completed in.
I have a seperate tab with the department names in column A and the charge rates in column B
On the second tab I have a spreadsheet that has columns A and B for hours used and material cost.
The third column is the dept name
The 4th column is the variable charge rate which changes dependant on which department is put in colum 3
The 5th Column is the total cost.
In the 5th column I have this formulae:
=VLOOKUP(F7,'Variable Costs'!A3:B16,2,FALSE)
This work fine.
However, the spreadsheet has about 200 entries per week and all the cells in column 4 and 5 are showing "#N/A" becuase there are no values for them to work with.
I don't like seeing this and normally will use the "IF" function to say that if column A and B are greater than 0 then do the sum, if not show "0"
This for some reason doesn't work with VLOOKUP. Not the way I am using it anyway
=IF(D7:E7 >0,"=VLOOKUP(F7,'Variable Costs'!A3:B16,2,FALSE)",0)
Use A Formula To Set A Defined Name As The Range In Vlookup?
Jul 4, 2014I have a number of data sheets in excel 2010 and I have price lists for various countries I need to automate a price book type thing whereby I create a formula which reads something like: Vlookup(X,=B1,3,true) whereby the cell B1 will be the result of a formula to return the country I need the pricing for. I have the ranges setup as things like: "Australia", "France" etc and the cell B1 shows this its value based on a previous lookup. Is it possible to get this to work?
View 3 Replies View Related