I want to do a Vlookup where the area/range that its looking at is named in a cell
So if my named Range is F226_0713 and that value is in Cell C13 How do I right the Vlookup to look for the Value in B17 in the named ranged identified in C13 and column index is 3 (rows over)?
is there a simple way to do a vlookup (or any other more appropriate formula) using the value of another cell to define the named range relevant to that lookup.
eg I will have two different ranges for fitness performance levels, each of these will be named "Male" and "Female".
I would like to do a lookup based on a formula as follows: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas  Z100 =vlookup(D4,NAMED RANGE,2,false)Â
the Named range would be a value in the same row ie B4 - being Male or Female
so I am hoping for something like Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas  Z100 =vlookup(D4,B4.Value,2,false)Â
otherwise I could just use an If and do something like: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas).
Many more Excel Formulas  Z100 =if(B4="Male",vlookup(D4,Male,2,false),vlookup(D4,Female,2,false) )Â
I have the following formula that works. However, I would like to automatically change a portion of it depending on the cell value. Let's say in cell A1 the user types in "IS 12-19-13" I would like to change the workbook name "IS 12-18-13" in the formula.
=IFERROR(VLOOKUP(BQ17,'[IS 12-18-13.xlsm]Summary'!$B$3:$D$21,3,FALSE),0)
Column A includes a name
Column B includes an age
Column C states a division (this is the column that contains the Vlookup function)
Column G is where I have to put a range of ages (for instance, x=<0,>3)
Column H is where the division name is.
The idea behind this exercise is to use the Vlookup function in column C to reference column G, and return a value in column H. Here a copy of my formula in column C: =VLOOKUP(B3,$G$3:$H$12,2,TRUE). For instance, if Mike (A) is 16 (B) then he would be in the Midget division (C). C is calculated by comparing column B to G, then returning a value in column H. For some odd reason, I can't get column G to reference an age range, such as 1-5 years old.
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
I need to format cell D1 to have the fill color be red if any cell in D2:D21 is blank. I've tried
=VLOOKUP("", $D$2:$D$21, 1, FALSE) but that returns #N/A (there is one blank cell in the range at the moment).
I really don't want to use =OR($D$2="", $D$3="", ...$D$21="") if I can avoid it.
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
I need to create a formula that will give me True or False if text in a cell matches any cells in a range.
For example:
Column A and B have text:
Account
Date
Name
Species
Column C has other and sometimes matching text:
Name
Deal
What formula would I use to find out if all cells in Columns A and B are represented in Column C?
I have a spreadsheet with columns A B & C
So in Column A would be the beginning range (E.g. 2000000) and B would be the end (3000000) with a description in C.
I have another spreadsheet which contain results between Colum A & B, e.g 212000 and would like to do a lookup to return the description in C?
Start End Description
10000002000000Result 1
20000013000000Result 2
30000014000000Result 3
suming a range, always staring with the "1" and then to what ever the vlookup is. so if the lookup value is 15 in column A, it would sum the %s from B1 to B15.
1
4%
2
2%
3
3%
4
3%
[code]....
I am trying to use a vlookup for two cells whose data are in a range of cells. The grid is in a range for weight and miles.
Weight
1000
1100
1200
[Code]....
For the example above, I have miles ranges in columns and weight ranges in rows. My output for the example should be 1025 as it falls in the 201-250 Mile and 1300-1399 Range. Is there a vlookup or a match/index that could find that output without looking through the grid?
It's a quick formula question that I have trouble solving..
See attached : LookupSample.xlsx
I am trying to do Vlookups across multiple sheets but cannot make it work. My result is #VALUE!
When I look at the Function Arguments it says the Table Array is Volatile.
My named range "Centers" has 19 tabs listed.
=VLOOKUP(A114,INDIRECT(""&Centers&"!A5:R395"),13,0)
I have a list (a) with distances and another list (b) that gives numbers to certain distance ranges. For instance:
[Code] ...........
Now, if I have a value of 4.5 in list (a), I want to look up the respective zone. For 4 classes, this can be done with an if formula (=if(4.5>50;Zone 4;if(4.5>25;Zone 3;if(..and so on))).
What can I do if I have lets say more than 100 ranges with respective zones (ranges not of equal size) because an if formula will not be feasible anymore?
Q1: In the range for the lookup I'm performing, the column with the possible match is the 2nd column. I've tested my function with this range, but it fails (range is $A$x:$K$x, with possible matches residing in column B). If I change the range so the 1st column has the desired data ($B$x:$K$x), it works. Can I modify the function to search using the 2nd column so I don't have to rearrange the columns in my worksheet?
Q2: Can I return an entire rold of data? If yes, how? I only know how to return one cell.
I am making a spreadsheet using excel 2003 to calculate sales and tax. Column B is formated for date (1/1/2010). Column D,E, and F are formatted for currency with column D=Total Price, column E=sale price, and column F=tax. In column B I type the date the transaction took place and in column D I type total price. Columns E and F are automaticly filled in with the formulas for same. In column H,I J row 9 I would like to calculate 1st Quarter Total Price, Sale Price, and Tax. Row 10 would hold 2nd Quarter info and so on. I searched for info but can't come up with any thing that works.
View 3 Replies View RelatedI have a 2 X 44 range of text cells in one worksheet. The first column includes the same array of variables that are found on a second worksheet. In the second worksheet I want to run a looping vlookup to check if the column in the second worksheet is empty, if it is not I want it to lookup the element in that column in that row from the first worksheet and return the 2nd column item to the adjacent column in the second worksheet.
When I run my program in its current form two problems happen. The first row in the range of the column I want the data returned in is empty, and for the rest of the rows the same value is returned, when it should in fact vary. I think part of the problem is that in my vlookup my entries are:
vlookup(CrudeType, Range("Sources"), 2, false) where crudetype is defined as Range("c2:c" & lrow). This is the C column on the second sheet, I want my output in the D column. Range("sources") is on the first sheet and covers D2:E45.
[Code]....
I'm trying to find a way to perform Vlookups against a dynamic range of data, where the number of rows/values in Col B is always subject to change.
The way that the workbook is structured is as follows:
Sheet1: Except for Cols A & B, this is a blank sheet. This is the sheet in which the vlookup values will need to fall into based on the number found in its' Column B
Sheet2: The sheet that contains the data that will be passed into Sheet1 via vlookup, and all of its Columns contain data.
So, basically, Sheet1 is a shell that needs to be filled with data copied over from Sheet2 based on vlookups against Col B.
The vlookups will need to be shifted back 1 column.
And examples of how the Vlookups need to work is:The value in Sheet2 [Col E], needs to get passed into Sheet1 [Col D]Along those lines:
The value in Sheet2 [Col F], needs to get passed into Sheet1 [Col E]
The value in Sheet2 [Col G], needs to get passed into Sheet1 [Col F]so on and so forth
So basically, all of the values passed into Sheet1 from Sheet2 need to be shifted back by 1 column until we reach the last Col (Col M in this file).
Where
The value in Sheet2 [Col M], needs to get passed into Sheet1 [Col L]
The number of columns will remain fixed, but again the number rows will vary week to week in both of the two sheets, so I would need to have a way of creating a Vlookup through VBA that accounts for the dynamic range in Col B.
Chik wee (as Borat might say),
I'm wondering? is there any way that you can use a named range for the array in a vlookup that is done in VBA?
my named range is "Lists" and here's my
I am hoping to do, is change a table's information based on a date range that is specified by the user. I have attached an example workbook below. In the example, on the Data sheet, there is the raw data information, showing user name, the date in question, and finally a number that refers to employee productivity on said date.
What I am hoping to do is to incorporate a vlookup function in order to change the data recovered on the Chart sheet by having the user select a date range. So that if you wanted to view the statistics for just Dec 15, 2008, it would only poll the data from that date, and if you wanted to view the statistics for any dates between Jan 1, 2009 and say Jan 30, 2009, it would do the same.
The workbook I'm working on has several sheets: Totals, Monday, Tuesday, etc set into a SheetArray.
The problem is that I'm trying to perform a VLOOKUP on data in worksheet "Monday" against column A in worksheet "Totals". However, the size of column A will change as the codes iterates through the days. Therefore, I need the range of column A in the Totals worksheet to be dynamic.
Code:
'Find any new projects in the daily data that are not in the Totals.
DayProjCount = Range(Sheets(SheetArray(A)).Range("AA2"), Sheets(SheetArray(A)).Range("AA2").End(xlDown)).Cells.Count
ProjCell = 2
With Worksheets("Totals")
[Code].....
During this process, the code should only find 1 error in ValidProject. But, each are throwing errors. I think it's because the VLOOKUP isn't searching through the correct range, but I don't know how to check it.
I have a workbook with 100 worksheets. Each worksheet is setup the same way with dates down column A, and data in column B. In another sheet, I need to run a vlookup on the dates and data, but I need it to adjust for whatever spreadsheet name I give it. Is there any way to have the vlookup table array change as I change the worksheet it should reference?
View 2 Replies View RelatedI am attempting to categorize IP Addresses. My lookup table looks like this:
Begin End Category
1.50.50.0 1.50.50.255 3
5.185.40.0 5.185.43.0 2
5.22.22.65 5.22.22.128 5
I have a list of IP addresses that need to be categorized.
IP Address Category
5.185.41.15 2
1.128.128.0 Null
1.50.50.128 3
The category column needs to be populated. The ranges in my look up table are not end to end (there are gaps).
Function Lookup got close, but assumed there were no gaps.
Is there a way that I can do a vlookup in 1 file and specify more than 1 data range to lookup the data in?
In this case I have one file to put the vlookup in and a second file with more than 1 tab and I want to have it search each of those tabs and return the result. The format of these sepatate tabs are to each other and for that matter, identicle to the main file.
My first worksheet contains the following information:
Column A contains parent category names (e.g. colours)
Column B contains lookup values (non-unique)
Column C contains value to return
Each subsequent worksheet is for a single parent category (i.e. a sheet per unique category)
I'm unsure how to write some code that will return column C for each worksheet
Example of first worksheet:
A
B
C
1
Group
Item
Amount
[code]....
From this, my code creates 4 new sheets named Red, Orange, Blue and Green with column A containing the item numbers that relate to the worksheet name in the table in the first sheet (e.g. column A in sheet Red contains item numbers 1 to 6 inclusive):
A
B
1
Item
Amount
2
1
x
[code]....
In column B, I could like to return the values in column C from the table in column C that are only specific to that worksheet name.
I think I want to filter column A in the first sheet against the sheet name and then perform a VLOOKUP on the filtered data or would using a dynamic range be better?
I want to run a vlookup (against cell D1 for this example), from a selection of date cells in column A (cell A1 in this example), where the date can be plus or minus a set number of days from the value in the cell (2 days either way in this example).
When I try the following it does not work:
if((A1-2)>A1>(A1+2)=D1,vlookup(D1,D:E,2,0))
Just to clarify, if D1=05/11/2012, I want the vlookup to return if cell A1 is equal to Nov 3rd, 4th, 5th, 6th, or 7th.
PS: =if(or(a1-2=d1,a1-1=d1,a1=d1,a1+1=d1,a1+2=d1),vlookup etc etc) returns the correct result, but if the date range I search on changes I don't want to rewrite the formula in this format.
I have a vlookup formula that works when looking up one specific value (ie F2 in example below)
=VLOOKUP($F$2,'All active PRs (RP6)'!B2:L2,12,FALSE)
But now, I want to lookup a range of possible text values (say F2 to F8 which would all have different text values). I've created F2 to F8 as a named range called ISS_Services and created a new formula
=VLOOKUP(ISS_Services,'All active PRs (RP6)'!$A2:$L2,5,FALSE)
But it doesn't want to work consistently. Can vlookup work in this scenario?
I am trying to do a vlookup that currently looks as follows:
Range("C2").Formula = "=VLOOKUP(A2,SAP!A$2:AA$42,2,FALSE)"
However, the selection of the table_array (SAP!A$2:AA$42) is a set value. Instead I would like to select all the data that is on sheet SAP. The idea is that the data set will not always be A2:AA42, so I need to make this part variable.
Normally I would use
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
to select the entire data set.
I have been creating my own custom Estimate/Invoice system for my Renovations business. I am really stuck on something. I have scoured my Excell Bible, asked numerous message boards and noone is able to help. I did find a reference to my issue here but it still left me confused.
Here is my issue.
I created multiple lists for my materials database. They are broken down by categorie…such as Drywall, Tile, Doors & Windows, Hardware, Etc. right now I have 14 lists which I continually add items to as they come up.
Each list are exactly the same, 3 columns Item, Unit, Cost.
I am try to do a Vlookup to access the cost of an item from these list. Please keep in mind that no item is EVER THE SAME.
I can make a simple vlookup work for example searching my drywall materials database VLOOKUP(A1,Drywall,3,False) with Drywall being the preset list range.
However I want my Vlookup to search EVERY MATERIALS LIST for the specified item. I have tried inserting an array into Vlookup that looks like this (List names are restricted to save space)
VLOOKUP(A1,{Drywall,Tile,Hardware,Paint},3,False)
But I can not get it to work, I can get one single list name to work but not an array of them. Is this possible?
Lastly If statements will not work here as I have upwards of 14 lists and If statements only allows nesting up 7 times for a limit.
Here is an example of what I am trying to do. I have a date in column A on Sheet 1. In Column B I want to return the period for which that date falls.
I have created a list of Start and End dates for each period in Sheet2. The start date is in Column A of Sheet2. The End Date is in Column B. And the resulting Period is in Column C.
Basically if the Date in Sheet1 Column A falls in between the start and end date for a specific period. I want that period returned in Column B of Sheet2.