I am using VLOOKUP to find the size of a cam to be installed in a tablet press, based on the product code it will be running.
The array has two columns: (W) Product Code, (X) Cam Size.
Array: W4:X437
The user selects the Product Code from a drop-down list in cell E5.
The resulting Cam Size is displayed in cell E7. The VLOOKUP works fine.
=IFERROR(VLOOKUP(E5,W4:X437,2,FALSE),"")
Occasionally, the cam size has to be updated. The user would then select a new cam size from a drop-down list in cell E9.
I have a "Update Cam Size" command button.
What I need to happen is for the value in E9 to replace the value in the array that is displayed in E7. Obviously, I have to know the location of the cell in the array, but I can't figure that part out. I've tried ADDRESS and MATCH functions, but it comes back with "#N/A" Value not available error.
When I use VLOOKUP formula within a VBA routine ex: For LoopCounter = 1 to LastRow With Worksheets("0MATERIAL") .Cells(RowCounter, 5).FormulaR1C1 = "VLOOKUP(RC[-2],'0MAT_UNIT'!R1C1:R65520C12,4,FALSE)" End With RowCounter = RowCounter + 1 Next LoopCounter
How can I find out what row or cell address that the VLOOKUP found the data? The above code works perfectly but the problem is I need data from that same row in columns 4-11. I replicated the .Cells line above and made each one a VLOOKUP (for column 4, 5, 6, etc...) but this kills the performance. I have around 32,000 rows in sheet 0MATERIAL and around 50,000 rows within sheet 0MAT_UNIT
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A Row2 56 Row3 44 Row4 65
AllData is a named range that refers to the range A2:A65536 AllData_UsedRange refers to A2:A4 by way of this formula. =OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work... ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
I am trying to get the addresses of different cells containing numbers. This addresses should be ranked by the size of the value from largest to smallest. Currently I am using this formula
and just increasing the variable of the LARGE function for every rank. This works fine up to the point some numbers are the same. If I have for example two cells containing a 80 and 80 is the largest value, rank 1 and 2 result in the same address (of the first cell containing the 80). But I want the formula to result in specific addresses for every number. I thought about using MAX instead of LARGE, but I don't get a working solution for the second (third, fourth, ...) largest value.
I have a named range, called 'event' relating to cells a2-a200, I have a named cell, 'eventcounter'. I was hoping that I would be able to use the named cell eventcounter in formulae on the cells in the event range rather than having to use the cell address. So instead of having a formula that was something like this, =if(a3= etc etc.
I could refer to the range event and eventcounter. Eventcouter gets its value simply by counting the number of non blank cells in the event range, so consequently - I can only figure out how to address the last entry in the event range in the manner that i wish.
I have to macros I'm working with the first take a user set range and prints the . Address to a cell.
The second Macro I'm trying to get to look at that cell and pull out the range. So is there an opposite fuction to .
Address that will convert excel format to a VBA Range format. Ex A cell with $A$1:$A$2 to Range("A1",A2")
Macro 1
Code: For j = 1 To x c = 1 For i = 1 To ws.Range("AD" & rc).Value ws.Range("AE" & rc).Value = Application.InputBox (Prompt:="What is the Heading of Data set #" & c & " Table " & tc & " This entry may repeat", Type:=8)
[Code] .........
Macro 2
Code: 'A lot of code here but I want to be able to set multiple ranges to the ranges list in the cell values. rng(2) = sh(0).Range("AG2").Value
I am having troubles with using two methods together. I know how to find the address of the first or last occurance of a MAX in a range. I also know how to create a MAXIF function using criteria to determine what to consider for the max calculation. I do not know how to return the address of the result from the MAXIF.
I am using Office 2003 on WinXP.
Ultimately I want to take the address of the first result of a MAXIF and use it to do a lookup for a corresponding value. I'm not sure if I will be able to do this with a combination of functions, or if I will need a macro.
I have a variable which contains the column number. How do I then reference a range in VBA using that column number, as opposed to the letter? I know how to convert the number into the letter, but I also know there has to be something more simpler. For instance, a form of the ADDRESS function, but in VBA?
The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...
for this i have written validation macro
If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then
do the validation;
end if;
this works fine, but i need to use or condition , is there any better way to write this, a more compact way,
I need to select a variable number of cells on a line. I know Range("A2:c2") will do exactly what I need EXCEPT i need to use variables to do it. Is this possible, and if so how.
I want to define the range from a given cell and all data below within the same column strDataStart is the named cell in the worksheet that want to start from. Below is what I tried and failed.
Function rngDataCol(strDataStart As String) As Range Dim rngDataEnd As Range rngDataEnd = Range("strDataStart").End(xlDown) rngDataCol = Range(Range("strDataStart").Address, rngDataEnd.Address) End Function
I am trying to create a correlation matrix that uses the =ADDRESS function to define the various columns of data which I want to correlate against each other (I require this flexibility because the number of columns and rows of data to be correlated will change). The basic formula I am using is something like the following: =CORREL((ADDRESS(Sheet1!$C$2+3,L2+2,,,"Sheet1")),(ADDRESS(Sheet1!$B$2,L2+2,,,"Sheet1")))
However, while the individual ADDRESS fomulas deliver the correct start and end cell references required, it seems that CORREL function won't accept the cell addresses that result from using the =ADDRESS function.
get the address of the last range copied to the clipboard? I tinkered with GetFromClipboard but I would like to find a solution that is not dependent upon DataObjects if possible. Since copied cells are "marqueed" in Excel, is there a property relating to marqueed cells address?
I've set up a macro to create around 50 http links (sites which i need to monitor every week but whose addresses change slightly every month)
I've also got a macro to open up all these web pages at once so I can look at them in internet explorer.
When these links are nicely created into cells the http link isn't recognised straight away by excel (e.g. doesn't go blue & underlined) until i click in the cell & change or return the cell value - as part of the autocorrect function i think.
Is there a way of getting excel to automatically recognise the http links without having to go individually into every cell.
I have created a work diary in Excel which is built up in half hour blocks. I am able to create my appointments (usually one or two hour blocks) by selecting a group of cells and running a macro which merges the cells, colours them and puts a border round them.
I now want to be able to delete individual appointments by selecting the appropriate appointment and running a macro to copy and paste from the same range of cells in another worksheet (which is effectively my blank master diary page). I have tried work out what code I need to put the range of the current selection into a variable in VBA but I'm not having any luck.
how to get the value of a cell by its name. For example, i give cell B2 Name "Hello" and value "2". how to use vba to get the value of 2 using its name 'Hello', but not the cell 'B2'. Somethings people delete and add rows or columns and using range may lost the right value.
construct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
Retrieving the address of the last cell before the FIRST blank in a range.
OK, I have searched the web through six different search engines and explored too many dead end solutions to this problem that I am nearly ready to just scrap the whole sheet.
The problem is very simple.
I need to return the address of the last cell that contains data before the FIRST blank cell.
Heck, I don’t even need to have the address, I can just index the position.
Problem is this question has been posted on nearly every excel help forum from here to pokipsy. Unfortunately EVERY solution I have seen fails the “FIRST blank” requirement.
I have a column of data that never has blanks until the end of the data. I need to know what that cell address is in order to identify a range.
This data has a table above it and below it so none of the “dynamic range” or “Dynamic range name” solutions will work.
How do you get that address without the function continuing to the last blank cell?
I have a named range BGl (G1:R1). I would like to see if a cell address ($U$6) is within the columns of that range. I need a function to give me a true or false based on changing cell addresses.
when I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious) ok so say it picks up..... cell A69... how do i get it to save range A69
I want my macro to be able to mail the active workbok through outlook using the email addressses in Cell R1 and having the body of the email have the text in cell R2:R8?
Dim OutApp As Object Dim OutMail As Object Dim ws As Worksheet Dim range as range
Set OutApp = CreateObject("Outlook.Application") Set OutMail = OutApp.CreateItem(0)
On Error Resume Next With OutMail .To = ws.Range("R1:R8").Value .CC = "" .BCC = "" .Subject = "This is the Subject line" .Body = ws.Range("R2:R8").Value .Send 'or use .Display End With On Error GoTo 0
